stTopology

OID (symbolic): SK-UPPS-MIB::stTopology

OID (numeric): 1.3.6.1.4.1.179.2.2.1.1.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This field holds the network topology id.
Topology ids are assigned by Schneider &
Koch.  The following topology ids have been
defined:

 ID     Topology
===     =========
01h     Ethernet
02h     FDDI
03h     Token Ring

What is stTopology?

The network topology of this adapter -- ethernet, fddi, or token-ring -- assigned per Schneider & Koch's own topology ID scheme.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.1.1.15
snmpwalk -v2c -c public <target> SK-UPPS-MIB::stTopology

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.1.1.15.1
snmpget -v2c -c public <target> SK-UPPS-MIB::stTopology.1

Start monitoring SysKonnect network interface adapter, Ethernet/Token Ring/FDDI card (IRQ/DMA/buffer resource configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SK-UPPS-MIB::stTopology OID value, configure state conditions and alerts, and monitor any SysKonnect network interface adapter, Ethernet/Token Ring/FDDI card (IRQ/DMA/buffer resource configuration) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.179	sk	SK-UPPS-MIB
1.3.6.1.4.1.179.2	skMibs	SK-UPPS-MIB
1.3.6.1.4.1.179.2.2	sk_board	SK-UPPS-MIB
1.3.6.1.4.1.179.2.2.1	sk_board_status	SK-UPPS-MIB
1.3.6.1.4.1.179.2.2.1.1	stTable	SK-UPPS-MIB
1.3.6.1.4.1.179.2.2.1.1.1	stEntry	SK-UPPS-MIB
1.3.6.1.4.1.179.2.2.1.1.1.15	stTopology	SK-UPPS-MIB

SK-UPPS-MIB :: stTopology

stTopology

Module

This MIB depends on