All MIBs › SK-UPPS-MIB › stInterrupt
stInterrupt
Module: SK-UPPS-MIB
OID (symbolic): SK-UPPS-MIB::stInterrupt
OID (numeric): 1.3.6.1.4.1.179.2.2.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This is the IRQ line used by the adapter (-1 if none).
What is stInterrupt?
The IRQ line used by this network adapter; reads -1 if the adapter uses no interrupt line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.1.1.4 snmpwalk -v2c -c public <target> SK-UPPS-MIB::stInterrupt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.1.1.4.1 snmpget -v2c -c public <target> SK-UPPS-MIB::stInterrupt.1
Start monitoring SysKonnect network interface adapter, Ethernet/Token Ring/FDDI card (IRQ/DMA/buffer resource configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SK-UPPS-MIB::stInterrupt OID value, configure state conditions and alerts, and monitor any SysKonnect network interface adapter, Ethernet/Token Ring/FDDI card (IRQ/DMA/buffer resource configuration) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.179 | sk | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2 | skMibs | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2 | sk_board | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1 | sk_board_status | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1.1 | stTable | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1.1.1 | stEntry | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1.1.1.4 | stInterrupt | SK-UPPS-MIB |