All MIBs › SK-UPPS-MIB › stBaseAddress
stBaseAddress
Module: SK-UPPS-MIB
OID (symbolic): SK-UPPS-MIB::stBaseAddress
OID (numeric): 1.3.6.1.4.1.179.2.2.1.1.1.5
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: This is the segment address (base) at which the adapter's RAM is located in the address space of the PC (0 if adapter has no shared memory).
What is stBaseAddress?
The base segment address at which this adapter's shared RAM is mapped into the PC's address space; reads 0 if the adapter has no shared memory.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.1.1.5 snmpwalk -v2c -c public <target> SK-UPPS-MIB::stBaseAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.1.1.5.1 snmpget -v2c -c public <target> SK-UPPS-MIB::stBaseAddress.1
Start monitoring SysKonnect network interface adapter, Ethernet/Token Ring/FDDI card (IRQ/DMA/buffer resource configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SK-UPPS-MIB::stBaseAddress OID value, configure state conditions and alerts, and monitor any SysKonnect network interface adapter, Ethernet/Token Ring/FDDI card (IRQ/DMA/buffer resource configuration) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.179 | sk | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2 | skMibs | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2 | sk_board | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1 | sk_board_status | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1.1 | stTable | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1.1.1 | stEntry | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1.1.1.5 | stBaseAddress | SK-UPPS-MIB |