All MIBs › SIEMENS-MULTIPATH-MIB › sieMPPortStatus
sieMPPortStatus
Module: SIEMENS-MULTIPATH-MIB
OID (symbolic): SIEMENS-MULTIPATH-MIB::sieMPPortStatus
OID (numeric): 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: These are the possible states a port can be in UNKNOWN cannot get status information for this port UNUSED this port cannot be used for MultiPath (user defined) DISABLED this port is turned off - no I/O is possible PASSTHROUGH every I/O for this port is sent through the driver without being looked at ACTIVE this port can accept I/Os. When load balancing is off only one port of a MultiPath group can be active STANDBY this port waits until an active port fails and takes over all I/Os then ERROR this port failed due to an error
What is sieMPPortStatus?
The current operating state of a storage port: unknown, unused, disabled, passthrough, active (currently handling I/O), standby (ready to take over on failure), or error. An admin checks this to identify which port in a group is carrying traffic and whether any port has failed into the error state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.3 snmpwalk -v2c -c public <target> SIEMENS-MULTIPATH-MIB::sieMPPortStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.3.1 snmpget -v2c -c public <target> SIEMENS-MULTIPATH-MIB::sieMPPortStatus.1
Start monitoring Siemens servers/storage hosts using multipath I/O, SAN-attached systems (path-group/load-balancing status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SIEMENS-MULTIPATH-MIB::sieMPPortStatus OID value, configure state conditions and alerts, and monitor any Siemens servers/storage hosts using multipath I/O, SAN-attached systems (path-group/load-balancing status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.2 | sniProductMibs | Application-Monitoring-MIB |
| 1.3.6.1.4.1.231.2.10 | sniExtensions | DESKTRAP-MIB |
| 1.3.6.1.4.1.231.2.10.2 | sniServerMgmt | FSC-SWITCH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2 | sniCommon | FSC-SWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.2.10.2.2.7 | sieMultiPath | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3 | sieMPContainer | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2 | sieMPPortTable | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1 | sieMPPort | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.3 | sieMPPortStatus | SIEMENS-MULTIPATH-MIB |