SIEMENS-MULTIPATH-MIB DEFINITIONS ::= BEGIN -- -- $Copyright$ -- Copyright (C) Siemens AG 1998 -- Copyright (C) Fujitsu Siemens Computers GmbH 2001 -- All rights reserved -- IMPORTS OBJECT-TYPE FROM RFC-1212 mib-2, DisplayString FROM RFC1213-MIB TimeTicks, Counter, Gauge, enterprises FROM RFC1155-SMI; -- The Windows NT MIB compiler doesn't do IMPORTS. -- So, include these definitions here. NT defines "DisplayString" as -- OCTET STRING (SIZE(0..255)), in RFC1213 it has no explicit size. -- DisplayString ::= OCTET STRING -- enterprises OBJECT IDENTIFIER ::= { iso org(3) dod(6) internet(1) private(4) 1 } -- Siemens Server Management MIB nodes -- sni OBJECT IDENTIFIER ::= { enterprises 231 } -- sniProductMibs OBJECT IDENTIFIER ::= { sni 2 } -- sniExtensions OBJECT IDENTIFIER ::= { sniProductMibs 10 } -- sniServerMgmt OBJECT IDENTIFIER ::= { sniExtensions 2 } -- sieInventory OBJECT IDENTIFIER ::= { sniServerMgmt 1 } -- sniCommon OBJECT IDENTIFIER ::= { sniServerMgmt 2 } -- sieBios OBJECT IDENTIFIER ::= { sniCommon 1 } -- sieEisa OBJECT IDENTIFIER ::= { sniCommon 2 } -- sieHd OBJECT IDENTIFIER ::= { sniCommon 3 } -- sieBus OBJECT IDENTIFIER ::= { sniCommon 4 } -- sieServerControl OBJECT IDENTIFIER ::= { sniCommon 5 } -- sieMultiPath OBJECT IDENTIFIER ::= { sniCommon 7 } -- siePcSpecific OBJECT IDENTIFIER ::= { sniServerMgmt 3 } -- sieScb OBJECT IDENTIFIER ::= { sniServerMgmt 4 } -- sieOsSpecific OBJECT IDENTIFIER ::= { sniServerMgmt 5 } -- sieOemComponents OBJECT IDENTIFIER ::= { sniServerMgmt 6 } -- sieSecurity OBJECT IDENTIFIER ::= { sniServerMgmt 7 } -- sieServerView OBJECT IDENTIFIER ::= { sniServerMgmt 8 } -- sieCluster OBJECT IDENTIFIER ::= { sniServerMgmt 9 } -- sieVersionView OBJECT IDENTIFIER ::= { sniServerMgmt 10 } -- sieTrapMib OBJECT IDENTIFIER ::= { sniExtensions 5 } -------------------------------------------------------------------------- -- The path to sieMultiPath: root of this MIB -- -------------------------------------------------------------------------- sni OBJECT IDENTIFIER ::= { enterprises 231 } sniProductMibs OBJECT IDENTIFIER ::= { sni 2 } sniExtensions OBJECT IDENTIFIER ::= { sniProductMibs 10 } sniServerMgmt OBJECT IDENTIFIER ::= { sniExtensions 2 } sniCommon OBJECT IDENTIFIER ::= { sniServerMgmt 2 } sieMultiPath OBJECT IDENTIFIER ::= { sniCommon 7 } sieMPAgentInfo OBJECT IDENTIFIER ::= { sieMultiPath 1 } sieMPState OBJECT IDENTIFIER ::= { sieMultiPath 2 } sieMPContainer OBJECT IDENTIFIER ::= { sieMultiPath 3 } sieMPTrapInfo OBJECT IDENTIFIER ::= { sieMultiPath 10 } -------------------------------------------------------------------------- -- The MultiPath SNMP agent's info group (for debugging and info) -- -- -- -- Information concerning the agent's name, version, etc. -- -------------------------------------------------------------------------- -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.1.1.0 sieMPAgentId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "MultiPath SNMP agent ID string" ::= { sieMPAgentInfo 1 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.1.2.0 sieMPAgentCompany OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "MultiPath SNMP agent company string" ::= { sieMPAgentInfo 2 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.1.3.0 sieMPAgentVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "MultiPath SNMP agent version string" ::= { sieMPAgentInfo 3 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.1.4.0 sieMPAgentBuild OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "MultiPath SNMP agent build date and time string" ::= { sieMPAgentInfo 4 } -------------------------------------------------------------------------- -- The MultiPath SNMP agent's state group -- -- -- -- This is information that is necessary across MultiPath groups. -- -------------------------------------------------------------------------- -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.2.1.0 sieMPLastDate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Date of last recent reconfiguration in time_t (seconds since 1/1/1970 00:00:00)" ::= { sieMPState 1 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.2.2.0 sieMPCurrentState OBJECT-TYPE SYNTAX INTEGER { ok (1), degraded (2), error (3), failed (4) } ACCESS read-only STATUS mandatory DESCRIPTION "This reflects the overall state of the driver, agent and the underlying ports. Possible values are: OK everything is fine DEGRADED there was an event from the driver marking a change of MultiPath configuration or port status ERROR software exception (software bug) FAILED communication with driver fails (bug, driver not installed)" ::= { sieMPState 2 } -------------------------------------------------------------------------- -- The MultiPath SNMP agent's containers (groups, ports, luns) -- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -- The MultiPath SNMP agent's MultiPath groups -- -- -- -- This is a list of all MultiPath groups that are created on a -- -- server. It is possible that a group consists of only one port. -- -------------------------------------------------------------------------- sieMPGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SieMPGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of available MultiPath groups" ::= { sieMPContainer 1} sieMPGroup OBJECT-TYPE SYNTAX SieMPGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry in table of MultiPath groups" INDEX { sieMPGroupID } ::= { sieMPGroupTable 1} SieMPGroup ::= SEQUENCE { sieMPGroupID INTEGER, sieMPGroupCommand INTEGER, sieMPGroupLoadBalancingStatus INTEGER, sieMPGroupAutorecoverStatus INTEGER } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.1.0 sieMPGroupID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each group, starts at 0 and remains unchanged from one re-initialization of the agent to the next" ::= { sieMPGroup 1 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.2.0 sieMPGroupCommand OBJECT-TYPE SYNTAX INTEGER { enable-load-balancing (1), disable-load-balancing (2), enable-autorecover (3), disable-autorecover (4), reconfigure (5) } ACCESS read-write STATUS mandatory DESCRIPTION "These are the possible commands a frontend can send to a MultiPath group. ENABLE-LOAD-BALANCING I/Os can use all available ports of a MultiPath group DISABLE-LOAD-BALANCING only one port of a MultiPath group can be used for I/Os ENABLE-AUTORECOVER a automatic failback (a formerly failed port was replaced and can be used again) is possible DISABLE-AUTORECOVER don't do automatic failback RECONFIGURE search all ports the can be integrated into a MultiPath group and build this group A GET always returns 0." ::= { sieMPGroup 2 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.3.0 sieMPGroupLoadBalancingStatus OBJECT-TYPE SYNTAX INTEGER { unknown (0), load-balancing-enabled (1), load-balancing-disabled (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Show wether load balancing is enabled or disabled" ::= { sieMPGroup 3 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.4.0 sieMPGroupAutorecoverStatus OBJECT-TYPE SYNTAX INTEGER { unknown (0), autorecover-enabled (1), autorecover-disabled (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Show wether autorecover is enabled or disabled" ::= { sieMPGroup 4 } -------------------------------------------------------------------------- -- The MultiPath SNMP agent's ports -- -- -- -- This is a list of all ports (atapi, SCSI, FC) of a server. The -- -- connection to the surrounding MultiPath group is given by a parent -- -- ID that corresponds directly to a group ID. -- -------------------------------------------------------------------------- sieMPPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SieMPPort ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of available ports" ::= { sieMPContainer 2} sieMPPort OBJECT-TYPE SYNTAX SieMPPort ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry in table of ports" INDEX { sieMPPortID } ::= { sieMPPortTable 1} SieMPPort ::= SEQUENCE { sieMPPortID INTEGER, sieMPParentGroup INTEGER, sieMPPortStatus INTEGER, sieMPPortCommand INTEGER, sieMPPortPciSlot INTEGER, sieMPPortHAType DisplayString, sieMPPortTargetID INTEGER, sieMPPortLastErrorNumber INTEGER, sieMPPortLastErrorTarget INTEGER, sieMPPortLastErrorLun INTEGER, sieMPPortLastErrorPath INTEGER } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.1.0 sieMPPortID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each port, starts at 0 and remains unchanged from one re-initialization of the agent to the next" ::= { sieMPPort 1 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.2.0 sieMPParentGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "sieMPGroupID of the group where port is member" ::= { sieMPPort 2 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.3.0 sieMPPortStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), unused (2), disabled (3), passthrough (4), active (5), standby (6), error (7) } ACCESS read-only STATUS mandatory DESCRIPTION "These are the possible states a port can be in UNKNOWN cannot get status information for this port UNUSED this port cannot be used for MultiPath (user defined) DISABLED this port is turned off - no I/O is possible PASSTHROUGH every I/O for this port is sent through the driver without being looked at ACTIVE this port can accept I/Os. When load balancing is off only one port of a MultiPath group can be active STANDBY this port waits until an active port fails and takes over all I/Os then ERROR this port failed due to an error" ::= { sieMPPort 3 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.4.0 sieMPPortCommand OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2), clear-error (3), active (4), remove-port (5) } ACCESS read-write STATUS mandatory DESCRIPTION "These are the possible commands a frontend can send to a port. ENABLE when a port was disabled by user request - enable it DISABLE disable a port CLEAR-ERROR clear the error flag of this port ACTIVE when load balancing is off this port will handle all I/Os. All other ports of this MultiPath group will be in status STANDBY REMOVE-PORT take a port out of a MultiPath group. It will get its own group A GET always returns 0." ::= { sieMPPort 4 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.5.0 sieMPPortPciSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Physical PCI slot of port" ::= { sieMPPort 5 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.6.0 sieMPPortHAType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Vendor, name, type of hostadaptor" ::= { sieMPPort 6 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.7.0 sieMPPortTargetID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI Target ID of port" ::= { sieMPPort 7 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.8.0 sieMPPortLastErrorNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last error number for port" ::= { sieMPPort 8 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.9.0 sieMPPortLastErrorTarget OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last target number where error occured for port" ::= { sieMPPort 9 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.10.0 sieMPPortLastErrorLun OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last lun number where error occured for port" ::= { sieMPPort 10 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.11.0 sieMPPortLastErrorPath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last path where error occured for port" ::= { sieMPPort 11 } -------------------------------------------------------------------------- -- The MultiPath SNMP agent's luns -- -- -- -- This is a list of all devices the OS can access by SCSI target num -- -- and SCSI lun. The corresponding controller is addressed by its ID. -- -------------------------------------------------------------------------- sieMPLunTable OBJECT-TYPE SYNTAX SEQUENCE OF SieMPLun ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of available luns" ::= { sieMPContainer 3} sieMPLun OBJECT-TYPE SYNTAX SieMPLun ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry in table of luns" INDEX { sieMPLunID } ::= { sieMPLunTable 1} SieMPLun ::= SEQUENCE { sieMPLunID INTEGER, sieMPLunParentPort INTEGER, sieMPLunTargetNo INTEGER, sieMPLunLunNo INTEGER, sieMPLunInquiry DisplayString, sieMPOSDeviceName DisplayString, sieMPLunType INTEGER, sieMPLunClaimed INTEGER } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.1.0 sieMPLunID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each lun, starts at 0 and remains unchanged from one re-initialization of the agent to the next" ::= { sieMPLun 1 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.2.0 sieMPLunParentPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "sieMPPortID of the group where lun is member" ::= { sieMPLun 2 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.3.0 sieMPLunTargetNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI Target ID of lun" ::= { sieMPLun 3 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.4.0 sieMPLunLunNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI LUN of lun" ::= { sieMPLun 4 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.5.0 sieMPLunInquiry OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Inquiry string containing serial number, etc. for lun" ::= { sieMPLun 5 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.6.0 sieMPOSDeviceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The operating system's name for this device (e.g. Windows NT: disk0)." ::= { sieMPLun 6 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.7.0 sieMPLunType OBJECT-TYPE SYNTAX INTEGER { disk (0), tape (1), printer (2), processor (3), worm (4), cdrom (5), scanner (6), optical-disk (7), jukebox (8), network (9), unit-not-present (127), unknown (255) } ACCESS read-only STATUS mandatory DESCRIPTION "SCSI LUN type" ::= { sieMPLun 7 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.8.0 sieMPLunClaimed OBJECT-TYPE SYNTAX INTEGER { not-claimed (0), claimed (1) } ACCESS read-only STATUS mandatory DESCRIPTION "SCSI LUN claimed status" ::= { sieMPLun 8 } -------------------------------------------------------------------------- -- The MultiPath SNMP agent's traps -- -------------------------------------------------------------------------- -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.10.1 sieMPTrapServerName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "Name of the server where the trap occured" ::= { sieMPTrapInfo 1 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.10.2 sieMPTrapTime OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Time the trap occured (in seconds since 1/1/1970 00:00:00)" ::= { sieMPTrapInfo 2 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.10.3 sieMPTrapGroupID OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The MultiPath Group ID where the change occured" ::= { sieMPTrapInfo 3 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.10.4 sieMPTrapPortID OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The MultiPath Port ID where the change occured" ::= { sieMPTrapInfo 4 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.10.5 sieMPTrapTargetID OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The MultiPath Target ID where the change occured" ::= { sieMPTrapInfo 5 } -- Oid: .1.3.6.1.4.1.231.2.10.2.2.7.10.6 sieMPTrapLunID OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The MultiPath Lun ID where the change occured" ::= { sieMPTrapInfo 6 } sieMPError TRAP-TYPE ENTERPRISE sniServerMgmt VARIABLES { sieMPTrapServerName, sieMPTrapTime, sieMPTrapGroupID, sieMPTrapPortID, sieMPTrapTargetID, sieMPTrapLunID } DESCRIPTION "Only one port of the MultiPath group was alive and this one failed. The MultiPath group is not operational anymore." --#TYPE "MP: Last port failed" --#SUMMARY "MultiPath group %d on server %s is down." --#ARGUMENTS { 2, 0 } --#SEVERITY CRITICAL --#TIMEINDEX 1 --#STATE NONOPERATIONAL ::= 1200 sieMPRetry TRAP-TYPE ENTERPRISE sniServerMgmt VARIABLES { sieMPTrapServerName, sieMPTrapTime, sieMPTrapGroupID, sieMPTrapPortID, sieMPTrapTargetID, sieMPTrapLunID } DESCRIPTION "One active port of a MultiPath group has failed. A retry on another path has been started." --#TYPE "MP: Port failed" --#SUMMARY "Port %d of MultiPath group %d on server %s is down. Error on ID %d, Lun %d." --#ARGUMENTS { 3, 2, 0 ,4 ,5 } --#SEVERITY MAJOR --#TIMEINDEX 1 --#STATE DEGRADED ::= 1201 sieMPActivePortChanged TRAP-TYPE ENTERPRISE sniServerMgmt VARIABLES { sieMPTrapServerName, sieMPTrapTime, sieMPTrapGroupID, sieMPTrapPortID, sieMPTrapTargetID, sieMPTrapLunID } DESCRIPTION "Trap occurs after the driver has activated a port as requested by the configuration utility." --#TYPE "MP: Port activated" --#SUMMARY "Active port for MultiPath group %d changed on server %s. Port %d is now active port." --#ARGUMENTS { 2, 0, 3 } --#SEVERITY INFORMATIONAL --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 1202 sieMPReconfigured TRAP-TYPE ENTERPRISE sniServerMgmt VARIABLES { sieMPTrapServerName, sieMPTrapTime, sieMPTrapGroupID, sieMPTrapPortID, sieMPTrapTargetID, sieMPTrapLunID } DESCRIPTION "Trap occurs after the driver has added a port to a MultiPath group (if a matching port was found) or removed a port from a MultiPath group. The action was requested by the configuration utility." --#TYPE "MP: Port added/removed" --#SUMMARY "MultiPath group %d reconfigured on server %s. Port %d was affected." --#ARGUMENTS { 2, 0, 3 } --#SEVERITY INFORMATIONAL --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 1203 sieMPStatusChanged TRAP-TYPE ENTERPRISE sniServerMgmt VARIABLES { sieMPTrapServerName, sieMPTrapTime, sieMPTrapGroupID, sieMPTrapPortID, sieMPTrapTargetID, sieMPTrapLunID } DESCRIPTION "Trap occurs after the driver has changed the behavior of a MultiPath group. Autorecovery was turned or off, loadbalancing was turned on or off or one port was enabled or disabled. The action was requested by the configuration utility." --#TYPE "MP: Behavior changed" --#SUMMARY "MultiPath behavior for group %d was changed on server %s." --#ARGUMENTS { 2, 0 } --#SEVERITY INFORMATIONAL --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 1204 sieMPAutoRecovered TRAP-TYPE ENTERPRISE sniServerMgmt VARIABLES { sieMPTrapServerName, sieMPTrapTime, sieMPTrapGroupID, sieMPTrapPortID, sieMPTrapTargetID, sieMPTrapLunID } DESCRIPTION "Trap occurs when the driver has detected that a port which was in status error is accessible again." --#TYPE "MP: Port alive again" --#SUMMARY "MultiPath group %d on server %s: Port %d recovered from error." --#ARGUMENTS { 2, 0, 3 } --#SEVERITY INFORMATIONAL --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 1205 sieMPErrorCleared TRAP-TYPE ENTERPRISE sniServerMgmt VARIABLES { sieMPTrapServerName, sieMPTrapTime, sieMPTrapGroupID, sieMPTrapPortID, sieMPTrapTargetID, sieMPTrapLunID } DESCRIPTION "Trap occurs after the driver has cleared the error status for a port from a MultiPath group as requested by the configuration utility." --#TYPE "MP: Status cleared" --#SUMMARY "MultiPath group %d on server %s: Error for MultiPath port %d was cleared." --#ARGUMENTS { 2, 0, 3 } --#SEVERITY INFORMATIONAL --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 1206 END