All MIBs › SIEMENS-MULTIPATH-MIB › sieMPPortCommand
sieMPPortCommand
Module: SIEMENS-MULTIPATH-MIB
OID (symbolic): SIEMENS-MULTIPATH-MIB::sieMPPortCommand
OID (numeric): 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: These are the possible commands a frontend can send to a port. ENABLE when a port was disabled by user request - enable it DISABLE disable a port CLEAR-ERROR clear the error flag of this port ACTIVE when load balancing is off this port will handle all I/Os. All other ports of this MultiPath group will be in status STANDBY REMOVE-PORT take a port out of a MultiPath group. It will get its own group A GET always returns 0.
What is sieMPPortCommand?
Sends a command to a specific port: enable, disable, clear-error, make it active (forcing others in the group to standby), or remove-port to split it into its own group; a GET always reads back 0. An admin uses clear-error after fixing a cabling fault to bring a port back into rotation, or active to manually force failover for maintenance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.4 snmpwalk -v2c -c public <target> SIEMENS-MULTIPATH-MIB::sieMPPortCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.4.1 snmpget -v2c -c public <target> SIEMENS-MULTIPATH-MIB::sieMPPortCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.4.1 i <value>
Start monitoring Siemens servers/storage hosts using multipath I/O, SAN-attached systems (path-group/load-balancing status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SIEMENS-MULTIPATH-MIB::sieMPPortCommand OID value, configure state conditions and alerts, and monitor any Siemens servers/storage hosts using multipath I/O, SAN-attached systems (path-group/load-balancing status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.2 | sniProductMibs | Application-Monitoring-MIB |
| 1.3.6.1.4.1.231.2.10 | sniExtensions | DESKTRAP-MIB |
| 1.3.6.1.4.1.231.2.10.2 | sniServerMgmt | FSC-SWITCH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2 | sniCommon | FSC-SWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.2.10.2.2.7 | sieMultiPath | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3 | sieMPContainer | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2 | sieMPPortTable | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1 | sieMPPort | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.4 | sieMPPortCommand | SIEMENS-MULTIPATH-MIB |