All MIBs › SIEMENS-MULTIPATH-MIB › sieMPGroupCommand
sieMPGroupCommand
Module: SIEMENS-MULTIPATH-MIB
OID (symbolic): SIEMENS-MULTIPATH-MIB::sieMPGroupCommand
OID (numeric): 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: These are the possible commands a frontend can send to a MultiPath group. ENABLE-LOAD-BALANCING I/Os can use all available ports of a MultiPath group DISABLE-LOAD-BALANCING only one port of a MultiPath group can be used for I/Os ENABLE-AUTORECOVER a automatic failback (a formerly failed port was replaced and can be used again) is possible DISABLE-AUTORECOVER don't do automatic failback RECONFIGURE search all ports the can be integrated into a MultiPath group and build this group A GET always returns 0.
What is sieMPGroupCommand?
Sends a command to a MultiPath group: enable/disable load balancing across its ports, enable/disable automatic failback, or reconfigure to rediscover ports; a GET always reads back 0. An admin sets disable-load-balancing to pin I/O to a single active port, or reconfigure after replacing a failed HBA to rebuild the group.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.2 snmpwalk -v2c -c public <target> SIEMENS-MULTIPATH-MIB::sieMPGroupCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.2.1 snmpget -v2c -c public <target> SIEMENS-MULTIPATH-MIB::sieMPGroupCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.2.1 i <value>
Start monitoring Siemens servers/storage hosts using multipath I/O, SAN-attached systems (path-group/load-balancing status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SIEMENS-MULTIPATH-MIB::sieMPGroupCommand OID value, configure state conditions and alerts, and monitor any Siemens servers/storage hosts using multipath I/O, SAN-attached systems (path-group/load-balancing status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.2 | sniProductMibs | Application-Monitoring-MIB |
| 1.3.6.1.4.1.231.2.10 | sniExtensions | DESKTRAP-MIB |
| 1.3.6.1.4.1.231.2.10.2 | sniServerMgmt | FSC-SWITCH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2 | sniCommon | FSC-SWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.2.10.2.2.7 | sieMultiPath | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3 | sieMPContainer | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1 | sieMPGroupTable | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1 | sieMPGroup | SIEMENS-MULTIPATH-MIB |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.2 | sieMPGroupCommand | SIEMENS-MULTIPATH-MIB |