All MIBs › SIAE-HITLESS-AGGRL1-MIB › hlAggrL1Behaviour
hlAggrL1Behaviour
Module: SIAE-HITLESS-AGGRL1-MIB
OID (symbolic): SIAE-HITLESS-AGGRL1-MIB::hlAggrL1Behaviour
OID (numeric): 1.3.6.1.4.1.3373.1103.98.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Every radio link is considered working in three separate ZONEs: GOOD ZONE: When it is working between the HITLESS profile (included) and the UPPER profile (included) HITLESS ZONE: When it is working between the LOWER profile (included) and the HITLESS profile (excluded) BAD ZONE: When the modem is unlocked
HITLESS profile (one for each radio link) is last profile that is considered good for L1 aggregation.
NE is in charge to select which of the links that are working into the HITLESS ZONE participate in L1 aggregation. The decision is taken according to three possible behaviors:
hlAggrL1AllSurvive(1): All links remain used by aggregator when working into the HITLESS ZONE. hlAggrL1OneSurvive(2): When NO link is working into the GOOD ZONE, the last link entered into the HITLESS ZONE continues to be used by the aggregator hlAggrL1NoneSurvive(3): Each link is removed from aggregation when working into the HITLESS ZONE
What is hlAggrL1Behaviour?
This read-write value defines how the network element decides which radio links working in the HITLESS zone (between the lower and HITLESS profile) stay part of a Layer 1 aggregation group, with hlAggrL1AllSurvive(1) keeping all such links, hlAggrL1OneSurvive(2) keeping only the last one to enter that zone when no link is in the good zone, and hlAggrL1NoneSurvive(3) dropping every link once it enters the HITLESS zone; the default is AllSurvive. Admins choose the behavior that balances aggregate capacity against link reliability during radio signal degradation. For example, setting hlAggrL1Behaviour to hlAggrL1NoneSurvive(3) means any radio link that degrades into the HITLESS zone is immediately pulled out of the aggregation group rather than kept in service.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3373.1103.98.2.1.2 snmpwalk -v2c -c public <target> SIAE-HITLESS-AGGRL1-MIB::hlAggrL1Behaviour
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3373.1103.98.2.1.2.1 snmpget -v2c -c public <target> SIAE-HITLESS-AGGRL1-MIB::hlAggrL1Behaviour.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3373.1103.98.2.1.2.1 i <value>
Start monitoring SIAE Microelettronica microwave radio, point-to-point radio backhaul link (hitless aggregation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SIAE-HITLESS-AGGRL1-MIB::hlAggrL1Behaviour OID value, configure state conditions and alerts, and monitor any SIAE Microelettronica microwave radio, point-to-point radio backhaul link (hitless aggregation status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3373 | siaeMicroelettronicaSpa | SIAE-TREE-MIB |
| 1.3.6.1.4.1.3373.1103 | siaeMib | SIAE-TREE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3373.1103.98 | hitlessAggregationL1 | SIAE-HITLESS-AGGRL1-MIB |
| 1.3.6.1.4.1.3373.1103.98.2 | hlAggrL1Table | SIAE-HITLESS-AGGRL1-MIB |
| 1.3.6.1.4.1.3373.1103.98.2.1 | hlAggrL1Entry | SIAE-HITLESS-AGGRL1-MIB |
| 1.3.6.1.4.1.3373.1103.98.2.1.2 | hlAggrL1Behaviour | SIAE-HITLESS-AGGRL1-MIB |