All MIBs › SENAO-WLAN-CB-MIB › ipGateway
ipGateway
Module: SENAO-WLAN-CB-MIB
OID (symbolic): SENAO-WLAN-CB-MIB::ipGateway
OID (numeric): 1.3.6.1.4.1.14125.5.4
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The IP address of this device's Gateway. The value of IP Gateway must NOT set to 0 or 255 @GET-FUNC=get_system_group @SET-FUNC=set_system_group
What is ipGateway?
Sets the device's default gateway IP address; the value must not be set to an all-zero or all-255 (broadcast-like) address. An admin configures this so the device's management traffic can route beyond its local subnet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14125.5.4 snmpwalk -v2c -c public <target> SENAO-WLAN-CB-MIB::ipGateway
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14125.5.4.1 snmpget -v2c -c public <target> SENAO-WLAN-CB-MIB::ipGateway.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.14125.5.4.1 a <value>
Start monitoring Senao WLAN client bridge/access point (IP-stack traffic counters, radio objects not sampled) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SENAO-WLAN-CB-MIB::ipGateway OID value, configure state conditions and alerts, and monitor any Senao WLAN client bridge/access point (IP-stack traffic counters, radio objects not sampled) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14125 | senao | SENAO-ENTERPRISE-INDOOR-AP-CB-MIB |
| 1.3.6.1.4.1.14125.5 | systemSettingsGroup | SENAO-WLAN-AP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14125.5.4 | ipGateway | SENAO-WLAN-CB-MIB |