All MIBs › SENAO-WLAN-AP-MIB › dhcpIPAddressTo
dhcpIPAddressTo
Module: SENAO-WLAN-AP-MIB
OID (symbolic): SENAO-WLAN-AP-MIB::dhcpIPAddressTo
OID (numeric): 1.3.6.1.4.1.14125.7.4
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: To set DHCP IP address range between dhcpIPAddressFrom and dhcpIPAddressTo. The IP address must NOT to set [x.x.x.0] or [x,x.x.255].And the DHCP address range must be in the LAN subnet. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group
What is dhcpIPAddressTo?
The ending address of the IP range the built-in DHCP server hands out to clients, working together with dhcpIPAddressFrom to bound the address pool.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14125.7.4 snmpwalk -v2c -c public <target> SENAO-WLAN-AP-MIB::dhcpIPAddressTo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14125.7.4.1 snmpget -v2c -c public <target> SENAO-WLAN-AP-MIB::dhcpIPAddressTo.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.14125.7.4.1 a <value>
Start monitoring Senao WLAN access point (radio/SSID configuration plus standard IP-stack counters) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SENAO-WLAN-AP-MIB::dhcpIPAddressTo OID value, configure state conditions and alerts, and monitor any Senao WLAN access point (radio/SSID configuration plus standard IP-stack counters) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14125 | senao | SENAO-ENTERPRISE-INDOOR-AP-CB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14125.7 | dhcpSettingsGroup | SENAO-WLAN-AP-MIB |
| 1.3.6.1.4.1.14125.7.4 | dhcpIPAddressTo | SENAO-WLAN-AP-MIB |