All MIBs › SCTE-HMS-PROPERTY-MIB › alarmEnable
alarmEnable
Module: SCTE-HMS-PROPERTY-MIB
OID (symbolic): SCTE-HMS-PROPERTY-MIB::alarmEnable
OID (numeric): 1.3.6.1.4.1.5591.1.1.1.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Alarm enable bit mask. A 1 in a bit position indicates the alarm is enabled. Bit 0 = LOLO (Major alarm) Bit 1 = LO (Minor alarm) Bit 2 = HI (Minor alarm) Bit 3 = HIHI (Major alarm) Bit 4 = Unused, must be zero Bit 5 = Unused, must be zero Bit 6 = Unused, must be zero Bit 7 = Unused, must be zero
This object should be kept in NV memory
What is alarmEnable?
This one-byte bit mask controls which of the four analog alarm thresholds, LOLO, LO, HI, and HIHI, are active for the associated property entry. An admin sets individual bits to enable or suppress specific severity levels of alarming on a parameter, and because the object is meant to be kept in non-volatile memory, the setting survives a reboot. For example, setting bit 0 and bit 3 enables only the LOLO and HIHI major-alarm thresholds while leaving the LO and HI minor thresholds disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5591.1.1.1.1.2 snmpwalk -v2c -c public <target> SCTE-HMS-PROPERTY-MIB::alarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5591.1.1.1.1.2.1 snmpget -v2c -c public <target> SCTE-HMS-PROPERTY-MIB::alarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5591.1.1.1.1.2.1 s <value>
Start monitoring cable/broadband HFC network element, transponder/line monitor/RF amplifier/fiber node/power supply (alarm-threshold property mechanism) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCTE-HMS-PROPERTY-MIB::alarmEnable OID value, configure state conditions and alerts, and monitor any cable/broadband HFC network element, transponder/line monitor/RF amplifier/fiber node/power supply (alarm-threshold property mechanism) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5591 | scteRoot | SCTE-ROOT |
| 1.3.6.1.4.1.5591.1 | scteHmsTree | SCTE-ROOT |
| 1.3.6.1.4.1.5591.1.1 | propertyIdent | SCTE-HMS-ROOTS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5591.1.1.1 | propertyTable | SCTE-HMS-PROPERTY-MIB |
| 1.3.6.1.4.1.5591.1.1.1.1 | propertyEntry | SCTE-HMS-PROPERTY-MIB |
| 1.3.6.1.4.1.5591.1.1.1.1.2 | alarmEnable | SCTE-HMS-PROPERTY-MIB |