SCANET-MIB :: trapIpAndCommunity

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSCANET-MIBtrapIpAndCommunity

trapIpAndCommunity

Module: SCANET-MIB

OID (symbolic): SCANET-MIB::trapIpAndCommunity

OID (numeric): 1.3.6.1.4.1.208.2.11.8.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This object contains the Ip address (4 byte) and the Community (0 to 31 byte) used in the Traps.

What is trapIpAndCommunity?

An encoded entry combining the destination IP address (4 bytes) and community string (0-31 bytes) used when sending traps to that host. Admins set this to register a specific NMS as a trap recipient.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.2.11.8.1.2
snmpwalk -v2c -c public <target> SCANET-MIB::trapIpAndCommunity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.208.2.11.8.1.2.1
snmpget -v2c -c public <target> SCANET-MIB::trapIpAndCommunity.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.208.2.11.8.1.2.1 s <value>

Start monitoring SCANET network devices (configuration/interface status, vendor origin uncertain) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCANET-MIB::trapIpAndCommunity OID value, configure state conditions and alerts, and monitor any SCANET network devices (configuration/interface status, vendor origin uncertain) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.208scanetSCANET-MIB
1.3.6.1.4.1.208.2mib2extSCANET-MIB
1.3.6.1.4.1.208.2.11snmpSCANET-MIB
1.3.6.1.4.1.208.2.11.8trapTableSCANET-MIB
1.3.6.1.4.1.208.2.11.8.1trapEntrySCANET-MIB
1.3.6.1.4.1.208.2.11.8.1.2trapIpAndCommunitySCANET-MIB