All MIBs › SCANET-MIB › swTftpIpAndSwName
swTftpIpAndSwName
Module: SCANET-MIB
OID (symbolic): SCANET-MIB::swTftpIpAndSwName
OID (numeric): 1.3.6.1.4.1.208.2.40.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object contains the IP address of the TFTP server (4 bytes) and the software file name (0 to 46 bytes). This is used to initiate a software update.
What is swTftpIpAndSwName?
An encoded value combining a TFTP server's IP address (4 bytes) and a software filename (up to 46 bytes); setting this object initiates a software update from that server and file. Admins use it as the trigger to kick off a firmware download and install over TFTP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.2.40.2 snmpwalk -v2c -c public <target> SCANET-MIB::swTftpIpAndSwName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.208.2.40.2.1 snmpget -v2c -c public <target> SCANET-MIB::swTftpIpAndSwName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.208.2.40.2.1 s <value>
Start monitoring SCANET network devices (configuration/interface status, vendor origin uncertain) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCANET-MIB::swTftpIpAndSwName OID value, configure state conditions and alerts, and monitor any SCANET network devices (configuration/interface status, vendor origin uncertain) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.208 | scanet | SCANET-MIB |
| 1.3.6.1.4.1.208.2 | mib2ext | SCANET-MIB |
| 1.3.6.1.4.1.208.2.40 | swUpdate | SCANET-MIB |
| 1.3.6.1.4.1.208.2.40.2 | swTftpIpAndSwName | SCANET-MIB |