All MIBs › SA-RG-MIB › saRgIpMgmtLanNetworksAllow
saRgIpMgmtLanNetworksAllow
Module: SA-RG-MIB
OID (symbolic): SA-RG-MIB::saRgIpMgmtLanNetworksAllow
OID (numeric): 1.3.6.1.4.1.1429.79.2.3.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Allows the user via the internal Web GUI (Lan Setup page to input an IPv4 public or private Local IP address other than a class C Private address (the default Network for the Primary BSS = 192.168.0.0/24, with the default Local Ip address = 192.168.0.1.) In all cases the mask must be 255.255.255.x since the RG is limited to supporting a maximum of 253 IP addresses. (See RFC1918 for a description of private IP addresses and specified ranges.) Available Mib settings: default(0): Only the third and fourth octets are editable in the Web GUI for the Local IP address (Ex. 192.168.x.x/24). anyPrivateClass(1): All 4 octets are editable in the Web GUI for Local IP address, but the network specified must be a Private class A, B or C network address. (Ex. A=10.x.x.x, B=172.16.x.x, C=192.168.x.x). anyClass(2): All 4 octets are editable in the Web GUI for Local IP address, and the network specified could be any public or private class A, B, or C address.
If the MSO specifically sets a Local IP address in saRgIpMgmtLanNetwork to a value other than the default value (for example: 192.168.0.1) then these fields will be uneditable by the user (grayed out).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1429.79.2.3.2.1.4 snmpwalk -v2c -c public <target> SA-RG-MIB::saRgIpMgmtLanNetworksAllow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1429.79.2.3.2.1.4.1 snmpget -v2c -c public <target> SA-RG-MIB::saRgIpMgmtLanNetworksAllow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1429.79.2.3.2.1.4.1 i <value>
Start monitoring DOCSIS residential gateway, cable modem/router combo (router/Wi-Fi gateway configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SA-RG-MIB::saRgIpMgmtLanNetworksAllow OID value, configure state conditions and alerts, and monitor any DOCSIS residential gateway, cable modem/router combo (router/Wi-Fi gateway configuration status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1429 | ciscoSPVTG | CISCO-DMN-DSG-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1429.79 | saModules | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2 | saRg | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3 | saRgIpMgmt | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3.2 | saRgIpMgmtLanTable | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3.2.1 | saRgIpMgmtLanEntry | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3.2.1.4 | saRgIpMgmtLanNetworksAllow | SA-RG-MIB |