All MIBs › SA-RG-MIB › saRgIpMgmtLanNapt
saRgIpMgmtLanNapt
Module: SA-RG-MIB
OID (symbolic): SA-RG-MIB::saRgIpMgmtLanNapt
OID (numeric): 1.3.6.1.4.1.1429.79.2.3.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value for primary BSS is stored in non-vol. The default value for other BSSs is: Enabled by default if interface is in router mode. Always disabled if interface is in bridge mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1429.79.2.3.2.1.9 snmpwalk -v2c -c public <target> SA-RG-MIB::saRgIpMgmtLanNapt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1429.79.2.3.2.1.9.1 snmpget -v2c -c public <target> SA-RG-MIB::saRgIpMgmtLanNapt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1429.79.2.3.2.1.9.1 i <value>
Start monitoring DOCSIS residential gateway, cable modem/router combo (router/Wi-Fi gateway configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SA-RG-MIB::saRgIpMgmtLanNapt OID value, configure state conditions and alerts, and monitor any DOCSIS residential gateway, cable modem/router combo (router/Wi-Fi gateway configuration status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1429 | ciscoSPVTG | CISCO-DMN-DSG-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1429.79 | saModules | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2 | saRg | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3 | saRgIpMgmt | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3.2 | saRgIpMgmtLanTable | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3.2.1 | saRgIpMgmtLanEntry | SA-RG-MIB |
| 1.3.6.1.4.1.1429.79.2.3.2.1.9 | saRgIpMgmtLanNapt | SA-RG-MIB |