RoamAbout-MIB :: rabtPTPInterval

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RoamAbout-MIB › rabtPTPInterval

rabtPTPInterval

Module: RoamAbout-MIB

OID (symbolic): RoamAbout-MIB::rabtPTPInterval

OID (numeric): 1.3.6.1.4.1.36.2.18.35.14.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Writing a 1 to this variable causes a single PTP sample to be performed.

What is rabtPTPInterval?

Writing a value of 1 to this object triggers a single Point-to-Point diagnostic sample to be taken. Use this to refresh the PTP signal/noise/quality readings on demand rather than waiting for a periodic sample.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.14.6
snmpwalk -v2c -c public <target> RoamAbout-MIB::rabtPTPInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.14.6.1
snmpget -v2c -c public <target> RoamAbout-MIB::rabtPTPInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.35.14.6.1 i <value>

Start monitoring DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RoamAbout-MIB::rabtPTPInterval OID value, configure state conditions and alerts, and monitor any DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.36decCMU-MIB
1.3.6.1.4.1.36.2emaDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18decMIBextensionDEC-ATM-CHASSIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.36.2.18.35roamaboutRoamAbout-MIB
1.3.6.1.4.1.36.2.18.35.14rabtPTPDiagRoamAbout-MIB
1.3.6.1.4.1.36.2.18.35.14.6rabtPTPIntervalRoamAbout-MIB