All MIBs › RoamAbout-MIB › rabtEncryptionEnable
rabtEncryptionEnable
Module: RoamAbout-MIB
OID (symbolic): RoamAbout-MIB::rabtEncryptionEnable
OID (numeric): 1.3.6.1.4.1.36.2.18.35.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Used to enable or disable encryption of the wireless radio signals if the installed PC Card supports encryption, and the Access Point is in the 'trusted' security mode. After changing this value, it will not be loaded onto the card until reset is performed.
This value varies from wliEncSelect in that it shows the future value of the encryption mode after the next reset, and wliEncSelect is read-only.
If the Access Point is in the 'non-trusted' security mode, this parameter cannot be set via SNMP, only through the console port.
What is rabtEncryptionEnable?
Setting this to enable(2) turns on wireless radio encryption if the installed PC card supports it and the AP is in 'trusted' security mode; a reset is needed before the change takes effect on the card. Unlike the read-only wliEncSelect, this object shows the pending future encryption state; in 'non-trusted' mode it can only be changed via the console, not SNMP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.13 snmpwalk -v2c -c public <target> RoamAbout-MIB::rabtEncryptionEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.13.1 snmpget -v2c -c public <target> RoamAbout-MIB::rabtEncryptionEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.35.13.1 i <value>
Start monitoring DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RoamAbout-MIB::rabtEncryptionEnable OID value, configure state conditions and alerts, and monitor any DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.35 | roamabout | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.13 | rabtEncryptionEnable | RoamAbout-MIB |