All MIBs › RoamAbout-MIB › rabtDot11FutureRTSThreshold
rabtDot11FutureRTSThreshold
Module: RoamAbout-MIB
OID (symbolic): RoamAbout-MIB::rabtDot11FutureRTSThreshold
OID (numeric): 1.3.6.1.4.1.36.2.18.35.15.2.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347.
What is rabtDot11FutureRTSThreshold?
This sets the frame-size threshold (0-2347 octets) above which an RTS/CTS handshake will be performed for unicast data/management frames, taking effect after the next reset; a value above the max frame size disables RTS/CTS, while zero enables it for all such frames. Use this to plan RTS/CTS tuning for hidden-node scenarios ahead of a maintenance reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.15.2.8 snmpwalk -v2c -c public <target> RoamAbout-MIB::rabtDot11FutureRTSThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.15.2.8.1 snmpget -v2c -c public <target> RoamAbout-MIB::rabtDot11FutureRTSThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.35.15.2.8.1 i <value>
Start monitoring DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RoamAbout-MIB::rabtDot11FutureRTSThreshold OID value, configure state conditions and alerts, and monitor any DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.35 | roamabout | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15 | rabtDot11 | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15.2 | rabtDot11Future | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15.2.8 | rabtDot11FutureRTSThreshold | RoamAbout-MIB |