All MIBs › RoamAbout-MIB › rabtDot11FutureChannel
rabtDot11FutureChannel
Module: RoamAbout-MIB
OID (symbolic): RoamAbout-MIB::rabtDot11FutureChannel
OID (numeric): 1.3.6.1.4.1.36.2.18.35.15.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the FUTURE channel (communication frequency) to be used for creating a BSS.
Note that different subsets of channels are valid for different registration domains. The current domain can be found at dot11CurrentRegDomain. The valid channels per domain are listed in the IEEE 802.11 specification. Setting an invalid channel will result in a SNMP BAD-VALUE error.
The term future means that a change takes effect after the next reset of the Access Point. The current channel can be obtained from dot11CurrentChannel.
What is rabtDot11FutureChannel?
This sets the 802.11 channel the Access Point will use after its next reset; valid channel numbers depend on the AP's registration domain (per dot11CurrentRegDomain and the 802.11 spec), and an invalid channel triggers an SNMP bad-value error. Use this to schedule a channel change without immediately disrupting current wireless clients, then reset the AP when convenient.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.15.2.1 snmpwalk -v2c -c public <target> RoamAbout-MIB::rabtDot11FutureChannel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.15.2.1.1 snmpget -v2c -c public <target> RoamAbout-MIB::rabtDot11FutureChannel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.35.15.2.1.1 i <value>
Start monitoring DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RoamAbout-MIB::rabtDot11FutureChannel OID value, configure state conditions and alerts, and monitor any DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.35 | roamabout | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15 | rabtDot11 | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15.2 | rabtDot11Future | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15.2.1 | rabtDot11FutureChannel | RoamAbout-MIB |