All MIBs › RoamAbout-MIB › rabtDot11CurrentOperationalRate
rabtDot11CurrentOperationalRate
Module: RoamAbout-MIB
OID (symbolic): RoamAbout-MIB::rabtDot11CurrentOperationalRate
OID (numeric): 1.3.6.1.4.1.36.2.18.35.15.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3.
What is rabtDot11CurrentOperationalRate?
This read-only octet string lists the current set of 802.11 data rates the station supports for transmitting, each octet in 500 kb/s increments (1 to 63.5 Mb/s); it's advertised in beacon and association frames to determine BSS compatibility. Use it to confirm which data rates clients will actually be offered on this radio right now.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.15.1.4 snmpwalk -v2c -c public <target> RoamAbout-MIB::rabtDot11CurrentOperationalRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.15.1.4.1 snmpget -v2c -c public <target> RoamAbout-MIB::rabtDot11CurrentOperationalRate.1
Start monitoring DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RoamAbout-MIB::rabtDot11CurrentOperationalRate OID value, configure state conditions and alerts, and monitor any DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.35 | roamabout | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15 | rabtDot11 | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15.1 | rabtDot11Current | RoamAbout-MIB |
| 1.3.6.1.4.1.36.2.18.35.15.1.4 | rabtDot11CurrentOperationalRate | RoamAbout-MIB |