RoamAbout-MIB :: rabtCrashUploadUseBootp

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RoamAbout-MIB › rabtCrashUploadUseBootp

rabtCrashUploadUseBootp

Module: RoamAbout-MIB

OID (symbolic): RoamAbout-MIB::rabtCrashUploadUseBootp

OID (numeric): 1.3.6.1.4.1.36.2.18.35.16.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Controls where the AccessPoint gets the information that it needs to upload crash dumps.

When true(1), indicates that the AP should use the BootP protocol to auto-configure parameters such as its own IP address, gateway IP, subnet, TFTP server IP address, and directory name.

When false(2), indicates that the AccessPoint should use locally-configured parameters stored in NVRAM.

What is rabtCrashUploadUseBootp?

Setting this to true(1) makes the Access Point use BootP to auto-configure parameters like its IP, gateway, subnet, and TFTP server/directory for crash-dump uploads; false(2) makes it use locally-configured NVRAM values instead. Use false(2) with rabtCrashUploadServerIP and rabtCrashUploadDirectory set explicitly if there's no BootP server available.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.16.5
snmpwalk -v2c -c public <target> RoamAbout-MIB::rabtCrashUploadUseBootp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.35.16.5.1
snmpget -v2c -c public <target> RoamAbout-MIB::rabtCrashUploadUseBootp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.35.16.5.1 i <value>

Start monitoring DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RoamAbout-MIB::rabtCrashUploadUseBootp OID value, configure state conditions and alerts, and monitor any DEC RoamAbout wireless access point, legacy 802.11 AP (radio card/firmware/configuration status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.36decCMU-MIB
1.3.6.1.4.1.36.2emaDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18decMIBextensionDEC-ATM-CHASSIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.36.2.18.35roamaboutRoamAbout-MIB
1.3.6.1.4.1.36.2.18.35.16roamaboutLoaderRoamAbout-MIB
1.3.6.1.4.1.36.2.18.35.16.5rabtCrashUploadUseBootpRoamAbout-MIB