RT-CFG-MIB :: nbRtDiffServVptMapAdminStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RT-CFG-MIB › nbRtDiffServVptMapAdminStatus

nbRtDiffServVptMapAdminStatus

Module: RT-CFG-MIB

OID (symbolic): RT-CFG-MIB::nbRtDiffServVptMapAdminStatus

OID (numeric): 1.3.6.1.4.1.629.1.50.12.5.6.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: GET or GET_NEXT Operation : - Responds 'valid' (1) value when the Entry is already exists. - Responds 'inValid' (2) value in case of no existing Entry. SET Operation : - Use 'valid' (1) value for new Entry creation. - Use 'inValid' (2) value for deleting of existing Entry. - Use 'restoreDefaultConfig' (5) value for restoring the default Profile configuration of existing Entry.

What is nbRtDiffServVptMapAdminStatus?

Reports valid or invalid depending on whether this VPT mapping entry currently exists when read; on a SET, use valid to create a new entry, invalid to delete an existing one, or restoreDefaultConfig to reset the profile back to its factory mapping. Note the source DESCRIPTION cites the restore value as '(5)' while the compiled SYNTAX enum defines restoreDefaultConfig as (3) -- the enum value actually used is (3).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.1.50.12.5.6.1.4
snmpwalk -v2c -c public <target> RT-CFG-MIB::nbRtDiffServVptMapAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.629.1.50.12.5.6.1.4.1
snmpget -v2c -c public <target> RT-CFG-MIB::nbRtDiffServVptMapAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.629.1.50.12.5.6.1.4.1 i <value>

Start monitoring NBase-Xyplex Linux-based router/switch platforms (virtual-interface/DiffServ configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RT-CFG-MIB::nbRtDiffServVptMapAdminStatus OID value, configure state conditions and alerts, and monitor any NBase-Xyplex Linux-based router/switch platforms (virtual-interface/DiffServ configuration) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.629nbaseCORE-MIB
1.3.6.1.4.1.629.1nbSwitchG1CORE-MIB
1.3.6.1.4.1.629.1.50nbSwitchG1IlCORE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.629.1.50.12nbRouterConfigRT-CFG-MIB
1.3.6.1.4.1.629.1.50.12.5nbRtDiffServRT-CFG-MIB
1.3.6.1.4.1.629.1.50.12.5.6nbRtDiffServVptMapTableRT-CFG-MIB
1.3.6.1.4.1.629.1.50.12.5.6.1nbRtDiffServVptMapEntryRT-CFG-MIB
1.3.6.1.4.1.629.1.50.12.5.6.1.4nbRtDiffServVptMapAdminStatusRT-CFG-MIB