All MIBs › RS232-MIB › rs232InSigName
rs232InSigName
Module: RS232-MIB
OID (symbolic): RS232-MIB::rs232InSigName
OID (numeric): 1.3.6.1.3.20.5.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Identification of a hardware signal, as follows:
rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling Rate Selector srts Secondary Request to Send scts Secondary Clear to Send sdcd Secondary Received Line Signal Detector
What is rs232InSigName?
Identifies which specific hardware control signal (RTS, CTS, DSR, DTR, RI, DCD, SQ, SRS, SRTS, SCTS, or SDCD, per EIA RS-232-C) this input signal entry reports on.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.20.5.1.2 snmpwalk -v2c -c public <target> RS232-MIB::rs232InSigName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.20.5.1.2.1 snmpget -v2c -c public <target> RS232-MIB::rs232InSigName.1
Start monitoring vendor-neutral, standards-based MIB, any network device with RS-232 serial/console ports with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RS232-MIB::rs232InSigName OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, any network device with RS-232 serial/console ports from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.20 | rs232 | RS232-MIB |
| 1.3.6.1.3.20.5 | rs232InSigTable | RS232-MIB |
| 1.3.6.1.3.20.5.1 | rs232InSigEntry | RS232-MIB |
| 1.3.6.1.3.20.5.1.2 | rs232InSigName | RS232-MIB |