All MIBs › ROUTER-OPT-MIB › cdx6500PCTRipParamInternalIpAd
cdx6500PCTRipParamInternalIpAd
Module: ROUTER-OPT-MIB
OID (symbolic): ROUTER-OPT-MIB::cdx6500PCTRipParamInternalIpAd
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.5.26
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: This is an IP Address that becomes the Default IP Address for the router. The Default IP Address is used as the IP source address of PING and ICMP frames originated from the router to unnumbered interfaces and it is the reported IP Address in SNMP Trap frames. A Internal Network is added to the router routing table with the network address derived from the configured Internal address and Internal Network Mask parameter. If Internal IP Address is left undefined or the network part of this address matches network address of the configured router interfaces, Default IP Address becomes the IP address of the lowest numbered operational interface of the router.
What is cdx6500PCTRipParamInternalIpAd?
An IP address that becomes the router's Default IP Address, used as the source address for router-originated PING/ICMP traffic and reported in SNMP traps; it also creates an Internal Network route. If left unset (or its network matches an existing interface), the router instead uses the IP address of its lowest-numbered operational interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.5.26 snmpwalk -v2c -c public <target> ROUTER-OPT-MIB::cdx6500PCTRipParamInternalIpAd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.5.26.1 snmpget -v2c -c public <target> ROUTER-OPT-MIB::cdx6500PCTRipParamInternalIpAd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.1.5.26.1 a <value>
Start monitoring network router, vendor unconfirmed from available source data (optional feature configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ROUTER-OPT-MIB::cdx6500PCTRipParamInternalIpAd OID value, configure state conditions and alerts, and monitor any network router, vendor unconfirmed from available source data (optional feature configuration) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.5 | cdx6500PCTRouterGroup | CDX6500-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.5.26 | cdx6500PCTRipParamInternalIpAd | ROUTER-OPT-MIB |