-- Version 2.15.1.2, modified 2001-10-20 11:28:35-04 ROUTER-OPT-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- Codex MIB Group definitions codex OBJECT IDENTIFIER ::= { enterprises 449 } cdxProductSpecific OBJECT IDENTIFIER ::= { codex 2 } cdx6500 OBJECT IDENTIFIER ::= { cdxProductSpecific 1 } cdx6500Configuration OBJECT IDENTIFIER ::= { cdx6500 2 } cdx6500CfgProtocolGroup OBJECT IDENTIFIER ::= { cdx6500Configuration 1 } cdx6500PCTRouterGroup OBJECT IDENTIFIER ::= { cdx6500CfgProtocolGroup 5 } cdx6500Statistics OBJECT IDENTIFIER ::= { cdx6500 3 } cdx6500StatProtocolGroup OBJECT IDENTIFIER ::= { cdx6500Statistics 1 } cdx6500PSTRouterGroup OBJECT IDENTIFIER ::= { cdx6500StatProtocolGroup 4 } cdx6500Controls OBJECT IDENTIFIER ::= { cdx6500 4 } -- Textual Conventions MacAddress ::= OCTET STRING (SIZE (6)) DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- SIZE ((0..255) -- -- Router Group -- IP Configurables cdx6500PCTRarpCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRarpCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ARP Cache Configuration Table." ::= { cdx6500PCTRouterGroup 1 } cdx6500PCTRarpCacheEntry OBJECT-TYPE SYNTAX Cdx6500PCTRarpCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables" INDEX { cdx6500PCTRarpCacheIndex } ::= { cdx6500PCTRarpCacheTable 1 } Cdx6500PCTRarpCacheEntry ::= SEQUENCE { cdx6500PCTRarpCacheIndex INTEGER, cdx6500PCTRarpCacheIfNum INTEGER, cdx6500PCTRarpCacheProtocol INTEGER, cdx6500PCTRarpCacheProtocolAd IpAddress, cdx6500PCTRarpCacheMacAd MacAddress } cdx6500PCTRarpCacheIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRarpCacheEntry 1 } cdx6500PCTRarpCacheIfNum OBJECT-TYPE SYNTAX INTEGER (1..36) ACCESS read-write STATUS mandatory DESCRIPTION "Interface Number. This must be a router Interface Number as assigned in the Interface Configuration Table (cdx6500PCTRifConfTable) entry." ::= { cdx6500PCTRarpCacheEntry 2 } cdx6500PCTRarpCacheProtocol OBJECT-TYPE SYNTAX INTEGER { ip (0), ipx (7), appleTalk (22), newvalIp (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Type. This identifies one of the routing protocols supported by the router. newvalIp : same functionality as 'ip', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRarpCacheEntry 3 } cdx6500PCTRarpCacheProtocolAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address. The IP address of a particular host on the attached network identified by the Interface Number." ::= { cdx6500PCTRarpCacheEntry 4 } cdx6500PCTRarpCacheMacAd OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "MAC Address.The hardware MAC address of the host with the IP Address of this entry." ::= { cdx6500PCTRarpCacheEntry 5 } cdx6500PCTRarpParamAutoRef OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Auto-Refresh. Enables/Disables the routers capacity to send an ARP request based on the entry in the translation cache before the refresh timer expires. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 2 } cdx6500PCTRarpParamRefTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Refresh Timeout. Changes the timeout value (in minutes) for the refresh timer. A setting of 0 turns off (disables) the refresh timer." ::= { cdx6500PCTRouterGroup 3 } cdx6500PCTRarpParamUseTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Usage Timeout. Changes the timeout value (in minutes) for the usage timer. A setting of 0 turns off (disables) the usage timer." ::= { cdx6500PCTRouterGroup 4 } cdx6500PCTRarpParamProxy OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Proxy ARP. Enables the router to respond as proxy for hosts on different nets reachable from the router. Normal ARP operation calls for hosts to send an ARP request only for destinations that are on the same IP network (or subnetwork) as the requester. Some IP hosts, however, ARP even for off-network IP destination hosts. This parameter enables the router to respond as a proxy for such off-network hosts, causing the source to properly send off-network packets to the router. The router will respond only if the destination network/subnetwork is in its IP Routing Table. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 5 } cdx6500PCTRarpParamProxySub OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Proxy ARP Subnets Only. Enables the router to respond as a proxy for hosts on different subnets of the same top-level IP net as the ARP requester. This is a subset of the operation controlled with the Proxy ARP parameter. The router will respond only for a reachable destination subnet,i.e. one which is in its IP Routing Table. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 6 } cdx6500PCTRaccControlTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRaccControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Access Control Table." ::= { cdx6500PCTRouterGroup 7 } cdx6500PCTRaccControlEntry OBJECT-TYPE SYNTAX Cdx6500PCTRaccControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRaccControlIndex } ::= { cdx6500PCTRaccControlTable 1 } Cdx6500PCTRaccControlEntry ::= SEQUENCE { cdx6500PCTRaccControlIndex INTEGER, cdx6500PCTRaccControlType INTEGER, cdx6500PCTRaccControlSrcAd IpAddress, cdx6500PCTRaccControlSrcMask IpAddress, cdx6500PCTRaccControlDstAd IpAddress, cdx6500PCTRaccControlDstMask IpAddress, cdx6500PCTRaccControlFstProt INTEGER, cdx6500PCTRaccControlLstProt INTEGER, cdx6500PCTRaccControlFstPort INTEGER, cdx6500PCTRaccControlLstPort INTEGER, cdx6500PCTRaccControlSrcPort DisplayString, cdx6500PCTRaccControlDstPort DisplayString, cdx6500PCTRaccControlInIniface DisplayString, cdx6500PCTRaccControlOutIniface DisplayString, cdx6500PCTRaccControlInLcon DisplayString, cdx6500PCTRaccControlOutLcon DisplayString } cdx6500PCTRaccControlIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRaccControlEntry 1 } cdx6500PCTRaccControlType OBJECT-TYPE SYNTAX INTEGER { excluded (0), included (1), newvalExcluded (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Access Type. Each received IP packet is compared with all Access Control list entries in order of Entry number. If the first matching Access Control Entry is include, the packet is forwarded. If the entry is exclude, the packet is dropped. If no matching entry is found, the packet is dropped. An entry matches a packet when the source IP address, destination IP address, IP Protocol number range and TCP/UDP port number range all match the packet. newvalExcluded : same functionality as 'excluded', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRaccControlEntry 2 } cdx6500PCTRaccControlSrcAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source Address. IP source address to compare against a packet. An IP packet's source IP address field matches an Access Control entry when the result of logically AND-ing it with the Source Mask field equals the Source Address field. A Source Address field of 0.0.0.0 with a Source Mask field of 0.0.0.0 matches any source IP address in the packet." ::= { cdx6500PCTRaccControlEntry 3 } cdx6500PCTRaccControlSrcMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Address Mask. Address mask to be applied to a received source IP address. An address is logically AND-ed with the mask and compared with the Source Address. For example, a mask of 255.0.0.0 with a result of 129.0.0.0 will match any address with 129 in the first byte. A mask of 255.255.255.255 with a result of 129.122.3.26 matches only the IP host 129.122.3.26. A mask of 0.0.0.0 with a result of 0.0.0.0 is a wild card, and matches any IP address." ::= { cdx6500PCTRaccControlEntry 4 } cdx6500PCTRaccControlDstAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination Address. IP destination address in dotted notation. An IP packet's destination IP address field matches an Access Control entry when the result of logically AND-ing it with the Destination Mask field equals the Destination Address field. A Destination Address field of 0.0.0.0 with a Destination Mask field of 0.0.0.0 matches any destination IP address in the packet." ::= { cdx6500PCTRaccControlEntry 5 } cdx6500PCTRaccControlDstMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Address Mask. Address mask in dotted notation to be applied to an IP packet's destination address. The packet destination IP address is logically AND-ed with the Destination Mask field and compared with the Destination Address field. For example, a mask of 255.0.0.0 with a result of 129.0.0.0 will match any address with 129 in the first byte. A mask of 255.255.255.255 with a result of 126.122.3.26 matches only the IP host 129.122.3.26. A mask of 0.0.0.0 with a result of 0.0.0.0 is a wild card, and matches any IP address." ::= { cdx6500PCTRaccControlEntry 6 } cdx6500PCTRaccControlFstProt OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "First Protocol. This decimal number corresponds to the protocol byte in the IP header. A packet with an IP protocol byte between the First Protocol value and Last Protocol value, inclusive, will match the entry. The First Protocol value must be less than or equal to the Last Protocol field value. A First Protocol of 0 and a Last Protocol of 255 will match all IP packets. Commonly used IP protocol numbers are 1 for ICMP, 6 for TCP, 8 for EGP, 17 for UDP and 89 for OSPF." ::= { cdx6500PCTRaccControlEntry 7 } cdx6500PCTRaccControlLstProt OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Last Protocol. This decimal number corresponds to the protocol byte in the IP header.A packet with a protocol value in the specified range will match. This parameter defines the upper value of this range, and must be greater than or equal to the First Protocol field value. A Protocol range of 0 to 255 will match all IP packets. Commonly used protocol numbers are 1 for ICMP, 6 for TCP, 8 for EGP, 17 for UDP and 89 for OSPF." ::= { cdx6500PCTRaccControlEntry 8 } cdx6500PCTRaccControlFstPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS deprecated DESCRIPTION "First Port. This decimal number corresponds to a UDP or TCP port number.A UDP or TCP packet will match an Access Control Entry when its UDP/TCP port number is at or above the entry's First Port value, and at or below the Last Port value. An entry with a First Port value of 0 and a Last Port value of 65535 will match all packets. Commonly used port numbers are 21 for FTP, 23 for Telnet, 25 for SMTP, 513 for rlogin, 520 for RIP, and 600 for X." ::= { cdx6500PCTRaccControlEntry 9 } cdx6500PCTRaccControlLstPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS deprecated DESCRIPTION "Last Port. This decimal number corresponds to a UDP or TCP port number. A UDP or TCP packet will match an Access Control Entry when its UDP/TCP port number is at or above the entry's First Port value, and at or below the Last Port value. An entry with a First Port value of 0 and a Last Port value of 65535 will match all packets. Commonly used port numbers are 21 for FTP, 23 for Telnet, 25 for SMTP, 513 for rlogin, 520 for RIP, and 600 for X." ::= { cdx6500PCTRaccControlEntry 10 } cdx6500PCTRaccControlSrcPort OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Source Port Range. This specifies the range (or set of ranges) of port numbers to which the packet's source socket number is compared. A range of 0-65535 will match all packets.A maximum of 8 ranges are permitted to be configured in this list." ::= { cdx6500PCTRaccControlEntry 11 } cdx6500PCTRaccControlDstPort OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Destination Port Range. This specifies the range (or set of ranges) of port numbers to which the packet's destination socket number is compared. A range of 0-65535 will match all packets.A maximum of 8 ranges are permitted to be configured in this list." ::= { cdx6500PCTRaccControlEntry 12 } cdx6500PCTRaccControlInIniface OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Inbound Interface List. This parameter specifies a list of interfaces. The filter is applied to packets received on these interfaces. A maximum of 8 ranges are permitted to be configured in this list : the list may be extended by configuring new entries with the same flow definitions. Ex: 1,5,7-10,20-25,31 ALL : This option is a wildcard used to match all interfaces. NONE : This indicates that the filter action will not be applied on any interface. INT : This option is a wild card entry used to match internally generated traffic such as Ping, Telnet, SNMP, SOTCP. ALL-PLUS-INT : This option is a wild card entry used to match all interfaces and internally generated traffic." ::= { cdx6500PCTRaccControlEntry 13 } cdx6500PCTRaccControlOutIniface OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Outbound Interface List. This parameter specifies a list of interfaces. The filter is applied to packets sent on these interfaces. A maximum of 8 ranges are permitted to be configured in this list : the list may be extended by configuring new entries with the same flow definitions. Ex: 1,5,7-10,20-25,31 ALL : This option is a wildcard used to match all interfaces. NONE : This indicates that the filter action will not be applied on any interface." ::= { cdx6500PCTRaccControlEntry 14 } cdx6500PCTRaccControlInLcon OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Inbound LCON List. This parameter specifies a list of LCONS. The filter is applied to packets received on these LCONs. A maximum of 8 ranges are permitted to be configured in this list : the list may be extended by configuring new entries with the same flow definitions. Ex: 1,5,7-10,20-25,31 ALL : This option is a wildcard used to match all LCONs. NONE : This indicates that the filter action will not be applied on any LCON." ::= { cdx6500PCTRaccControlEntry 15 } cdx6500PCTRaccControlOutLcon OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Outbound LCON List. This parameter specifies a list of LCONS. The filter is applied to packets sent on these LCONs. A maximum of 8 ranges are permitted to be configured in this list : the list may be extended by configuring new entries with the same flow definitions. Ex: 1,5,7-10,20-25,31 ALL : This option is a wildcard used to match all LCONs. NONE : This indicates that the filter action will not be applied on any LCON." ::= { cdx6500PCTRaccControlEntry 16 } cdx6500PCTRAcceptRIPRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRAcceptRIPRouteEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "IP Accept RIP Route Table. This table is now called Rip Route Control Table. Access RIP Route Control Table to get these values" ::= { cdx6500PCTRouterGroup 8 } cdx6500PCTRAcceptRIPRouteEntry OBJECT-TYPE SYNTAX Cdx6500PCTRAcceptRIPRouteEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "IP Accept RIP Route Table. This table is now called Rip Route Control Table. Access RIP Route Control Table to get these values" INDEX { cdx6500PCTRAcceptRIPRouteIndex } ::= { cdx6500PCTRAcceptRIPRouteTable 1 } Cdx6500PCTRAcceptRIPRouteEntry ::= SEQUENCE { cdx6500PCTRAcceptRIPRouteIndex INTEGER, cdx6500PCTRAcceptRIPRouteIpNet IpAddress } cdx6500PCTRAcceptRIPRouteIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS not-accessible STATUS obsolete DESCRIPTION "Table Index." ::= { cdx6500PCTRAcceptRIPRouteEntry 1 } cdx6500PCTRAcceptRIPRouteIpNet OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS obsolete DESCRIPTION "This parameter is now the part of Rip route control Table. IP Network/subnet. IP address which identifies a destination network or subnetwork for which RIP route information is accepted. The route is accepted from any received RIP packet, and overrides any disabled Learn Net Route or Learn Subnet Route setting." ::= { cdx6500PCTRAcceptRIPRouteEntry 2 } cdx6500PCTRifConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRifConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Interface Table." ::= { cdx6500PCTRouterGroup 9 } cdx6500PCTRifConfEntry OBJECT-TYPE SYNTAX Cdx6500PCTRifConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRifConfIndex } ::= { cdx6500PCTRifConfTable 1 } Cdx6500PCTRifConfEntry ::= SEQUENCE { cdx6500PCTRifConfIndex INTEGER, cdx6500PCTRifConfIfNum INTEGER, cdx6500PCTRifConfIpAd IpAddress, cdx6500PCTRifConfAdMask IpAddress, cdx6500PCTRifConfOvrDefRoute INTEGER, cdx6500PCTRifConfOvrStatRoute INTEGER, cdx6500PCTRifConfSndgDefRoute INTEGER, cdx6500PCTRifConfSndgNetRoute INTEGER, cdx6500PCTRifConfSndgSubRoute INTEGER, cdx6500PCTRifConfSndgStatRoute INTEGER, cdx6500PCTRifConfRcvgRipPkts INTEGER, cdx6500PCTRifConfRcvgDynNets INTEGER, cdx6500PCTRifConfRcvgDynSubs INTEGER, cdx6500PCTRifConfTagAsNum INTEGER, cdx6500PCTRifConfBcastStyle INTEGER, cdx6500PCTRifConfBcastFill INTEGER, cdx6500PCTRifMaxIpMTUSize INTEGER, cdx6500PCTRifConfSplitHorizon INTEGER, cdx6500PCTRifConfSr INTEGER, cdx6500PCTRifRipMetric INTEGER, cdx6500PCTRifSendRipVer DisplayString, cdx6500PCTRifSendAggRoutes INTEGER, cdx6500PCTRifAuthType INTEGER, cdx6500PCTRifAuthKey DisplayString, cdx6500PCTRifOnDemandRip INTEGER, cdx6500PCTRifTrigUpdate INTEGER, cdx6500PCTRifSecPrdBcastIntv INTEGER, cdx6500PCTRifRoutInvldTime INTEGER, cdx6500PCTRifRoutFlushTime INTEGER, cdx6500PCTRifRdpEnable INTEGER, cdx6500PCTRifRdpLevel DisplayString } cdx6500PCTRifConfIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRifConfEntry 1 } cdx6500PCTRifConfIfNum OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Interface Number. Each interface must be assigned an Interface Number. Interface Numbers 1 through 4 are for the LAN ports. Interface numbers 5 through 36 are reserved for Lan Connections, which are virtual circuit links over WAN networks such as X.25 or Frame Relay to other routers." ::= { cdx6500PCTRifConfEntry 2 } cdx6500PCTRifConfIpAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address. This parameter defines the 32-bit IP host address of the router on the associated interface. IP Addresses are considered to consist of a network part, a subnetwork part, and a host number. All IP routers and hosts on a LAN must be assigned the same network/subnetwork part for their IP address. The serial links (LAN connections) between routers must also be assigned an IP network/subnetwork number, and the IP Address assigned on both sides of a serial link must have the same network (and subnetwork) part." ::= { cdx6500PCTRifConfEntry 3 } cdx6500PCTRifConfAdMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Address Mask. This parameter is entered in dotted notation and configures the 32-bit IP Subnetwork Address Mask associated with network to which the interfaces attaches. The subnetwork address mask has 1 bit for the bits which form the network and subnetwork portions of the IP address. For example, if the interface is on a class B network such as 128.185.0.0, and the third byte is used to select a subnet (e.g. 128.185.100.0), the mask should be set to 255.255.255.0. All IP devices on a subnetted network must be configured with the same subnetwork address mask." ::= { cdx6500PCTRifConfEntry 4 } cdx6500PCTRifConfOvrDefRoute OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Override Default Route.Enables the router to override the configured Default Gateway when it receives a RIP update from another router advertising the default route of 0.0.0.0 with a cheaper metric than the configured Default Gateway Metric. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 5 } cdx6500PCTRifConfOvrStatRoute OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Override Static Route. Enables/Disables the receipt of RIP information on this interface to override the router's statically configured routing information, providing the cost of the RIP information is cheaper. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 6 } cdx6500PCTRifConfSndgDefRoute OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Advertise Default Route. Enables/Disables this router advertising the default route of 0.0.0.0 on this interface. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 7 } cdx6500PCTRifConfSndgNetRoute OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Advertise Network Routes. Enables/Disables advertisement of directly-attached networks and learned IP network routes on RIP updates transmitted on this interface. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 8 } cdx6500PCTRifConfSndgSubRoute OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Advertise Subnet Routes. Enables/Disables the inclusion of all subnet routes within RIP updates sent on this interface. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 9 } cdx6500PCTRifConfSndgStatRoute OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Advertise Static/Direct Routes. Enables/Disables the inclusion of all statically configured and directly connected routes within RIP updates sent on this interface. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 10 } cdx6500PCTRifConfRcvgRipPkts OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Accept RIP. Enables/Disables the processing of RIP updates received on this interface. This is normally enabled whenever RIP is enabled. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 11 } cdx6500PCTRifConfRcvgDynNets OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Learn Network Routes. Enables/Disables the learning of new network-level routes received from neighboring routers on this interface's network. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 12 } cdx6500PCTRifConfRcvgDynSubs OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Learn Subnet Routes. Enables/Disables the learning of new subnet-level routes received from neighboring routers on this interface's network. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 13 } cdx6500PCTRifConfTagAsNum OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "AS Number. Specifies a tag to be associated with RIP information received on this interface. Tags are used to group routes together for later readvertisement via EGP, where the tag is treated as if it were a route's source Autonomous System. Tags are also propagated by the OSPF routing protocol." ::= { cdx6500PCTRifConfEntry 14 } cdx6500PCTRifConfBcastStyle OBJECT-TYPE SYNTAX INTEGER { network (0), local (1), newvalNetwork (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast Style. Specifies the convention for addressing IP broadcasts to all other hosts on the attached network. LOCAL broadcast style means that the Broadcast Fill Pattern (1s or 0s) fills all 32 bits of the IP broadcast address. NET broadcast style means that the Network and subnetwork portion of the IP broadcast address is set to the interface's network number, and the Broadcast Fill pattern fills only the host portion. Examples: LOCAL 1-fill: 255.255.255.255 LOCAL 0-fill: 0.0.0.0 NET 1-fill: 128.185.255.255 NET 0-fill: 128.185.0.0 All IP devices on a network must be configured with the same IP broadcast address convention. newvalNetwork : same functionality as 'network', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 15 } cdx6500PCTRifConfBcastFill OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast Fill Pattern. Specifies the IP broadcast fill pattern the router will use when broadcasting on this interface. See Broadcast Style, cdx6500PCTRifConfBcastStyle." ::= { cdx6500PCTRifConfEntry 16 } cdx6500PCTRifMaxIpMTUSize OBJECT-TYPE SYNTAX INTEGER (576..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the Maximum Transmission Unit to be used." ::= { cdx6500PCTRifConfEntry 17 } cdx6500PCTRifConfSplitHorizon OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enables/disables the IP RIP split horizon. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 18 } cdx6500PCTRifConfSr OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enables/disables the IP use of a RIF field in Token Ring networks for ARPs and RIPs. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifConfEntry 19 } cdx6500PCTRifRipMetric OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "The cost,in number of hops to receive a packet through this interface. This is the cost of direct route in this interface." ::= { cdx6500PCTRifConfEntry 20 } cdx6500PCTRifSendRipVer OBJECT-TYPE SYNTAX DisplayString (SIZE(2..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Send RIP Version. VER1 - send RIP Version 1 updates, VER2-B - send RIP Version 2 updates as broadcast, VER2-M - send RIP Version 2 updates as multicast." ::= { cdx6500PCTRifConfEntry 21 } cdx6500PCTRifSendAggRoutes OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When disabled, this parameter indicates that when sending routes to this interface, aggregated routing information is converted into non aggregated routing information." ::= { cdx6500PCTRifConfEntry 22 } cdx6500PCTRifAuthType OBJECT-TYPE SYNTAX INTEGER { none (1), simple (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This defines the type of authenticaton to be used for RIPv2 Packets." ::= { cdx6500PCTRifConfEntry 23 } cdx6500PCTRifAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the Authentication key sent in the RIP packet." ::= { cdx6500PCTRifConfEntry 24 } cdx6500PCTRifOnDemandRip OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable : Enables on demand RIP for the interface Disable : Disables on demand RIP for the interface." ::= { cdx6500PCTRifConfEntry 25 } cdx6500PCTRifTrigUpdate OBJECT-TYPE SYNTAX INTEGER { none (1), change (2), full (3) } ACCESS read-write STATUS mandatory DESCRIPTION "None : No triggered updates will be sent Changes : Triggered updates will be sent with only the changed routing table entries. Full : Triggered updates will be sent with all the entries in the routing table." ::= { cdx6500PCTRifConfEntry 26 } cdx6500PCTRifSecPrdBcastIntv OBJECT-TYPE SYNTAX INTEGER (6..65529) ACCESS read-write STATUS mandatory DESCRIPTION "Full RIP updates will be sent periodically with the time interval configured in seconds." ::= { cdx6500PCTRifConfEntry 27 } cdx6500PCTRifRoutInvldTime OBJECT-TYPE SYNTAX INTEGER (10..65530) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies time in sec after which the route will be marked unreachable.The time interval should be a multiple of 10." ::= { cdx6500PCTRifConfEntry 28 } cdx6500PCTRifRoutFlushTime OBJECT-TYPE SYNTAX INTEGER (10..65530) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies time in sec after which the route will be deleted from the routing table.The time interval should be a multiple of 10." ::= { cdx6500PCTRifConfEntry 29 } cdx6500PCTRifRdpEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables the advertising of this interface's address for Router Discovery (RFC 1256)." ::= { cdx6500PCTRifConfEntry 30 } cdx6500PCTRifRdpLevel OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the preferability of this interface's address as the default router address on the interface's subnet. Range : 0 - 0xffffffff." ::= { cdx6500PCTRifConfEntry 31 } cdx6500PCTRbootpServTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRbootpServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP BOOTP Server Table." ::= { cdx6500PCTRouterGroup 10 } cdx6500PCTRbootpServEntry OBJECT-TYPE SYNTAX Cdx6500PCTRbootpServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRbootpServIndex } ::= { cdx6500PCTRbootpServTable 1 } Cdx6500PCTRbootpServEntry ::= SEQUENCE { cdx6500PCTRbootpServIndex INTEGER, cdx6500PCTRbootpServAd IpAddress } cdx6500PCTRbootpServIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRbootpServEntry 1 } cdx6500PCTRbootpServAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "BOOTP Server Address. Adds a BootP server IP address (in dotted notation) to the routers configuration (the router will forward BootP requests to the specified BootP server). This must be used in conjunction with the BootP Forwarding command under the IP Parameters menu. There are no defaults for this command and valid address must be entered." ::= { cdx6500PCTRbootpServEntry 2 } cdx6500PCTRegpAsTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRegpAsEntry ACCESS not-accessible STATUS optional DESCRIPTION "IP EGP AS Information Table." ::= { cdx6500PCTRouterGroup 11 } cdx6500PCTRegpAsEntry OBJECT-TYPE SYNTAX Cdx6500PCTRegpAsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRegpAsIndex } ::= { cdx6500PCTRegpAsTable 1 } Cdx6500PCTRegpAsEntry ::= SEQUENCE { cdx6500PCTRegpAsIndex INTEGER, cdx6500PCTRegpAsNeighAs INTEGER, cdx6500PCTRegpAsInterchFlag INTEGER, cdx6500PCTRegpAsUseEgMetric INTEGER, cdx6500PCTRegpAsDefMetric INTEGER } cdx6500PCTRegpAsIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRegpAsEntry 1 } cdx6500PCTRegpAsNeighAs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Neighboring AS. The number of the Autonomous System to which routing information wil be exchanged. For a value of 0, the default EGP exchange is defined." ::= { cdx6500PCTRegpAsEntry 2 } cdx6500PCTRegpAsInterchFlag OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), newvalOff (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Interchange Flag. Defines the permissible exchange of EGP route information. IN causes all routes received from the neighboring AS to be readvertised via OSPF and RIP. OUT causes all internal known routes to be advertised to EGP. OFF indicates the particular IP networks to be re-advertised are controlled with the Output-Interchange and Input-Interchange configurations. OFF is the recommended configuration. newvalOff : same functionality as 'off', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRegpAsEntry 3 } cdx6500PCTRegpAsUseEgMetric OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), newvalOff (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Use EGP Metric. This parameter is ON or OFF. When ON, the re-advertised cost is the same as the originally learned cost. For IN interchanges, the EGP cost metric is reported as the RIP/OSPF cost. For OUT interchanges, the RIP/OSPF cost metric is reported as the EGP cost. If this parameter is OFF, the Default Metric parameter of this record is always reported as the cost. newvalOff : same functionality as 'off', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRegpAsEntry 4 } cdx6500PCTRegpAsDefMetric OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Default Metric. The default cost used for readvertisements. This is usually interpreted as a number of hops. For IN interchanges, this means all routes will be readvertised by OSPF and RIP with the Default Metric cost. In the OUT direction, this means all routes in the RIP/OSPF routing table will be advertised to EGP with the given cost." ::= { cdx6500PCTRegpAsEntry 5 } cdx6500PCTRegpNeighTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRegpNeighEntry ACCESS not-accessible STATUS optional DESCRIPTION "IP EGP Neighbor Table." ::= { cdx6500PCTRouterGroup 12 } cdx6500PCTRegpNeighEntry OBJECT-TYPE SYNTAX Cdx6500PCTRegpNeighEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRegpNeighIndex } ::= { cdx6500PCTRegpNeighTable 1 } Cdx6500PCTRegpNeighEntry ::= SEQUENCE { cdx6500PCTRegpNeighIndex INTEGER, cdx6500PCTRegpNeighIdAd IpAddress, cdx6500PCTRegpNeighAs INTEGER } cdx6500PCTRegpNeighIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRegpNeighEntry 1 } cdx6500PCTRegpNeighIdAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Neighbor IP Address. IP address of an EGP neighbor in dotted notation." ::= { cdx6500PCTRegpNeighEntry 2 } cdx6500PCTRegpNeighAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Neighboring AS. Autonomous System number of the EGP neighbor." ::= { cdx6500PCTRegpNeighEntry 3 } cdx6500PCTRipParamBootpFwdg OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "BOOTP Forwarding. Enables/Disables the forwarding of BootP requests. BOOTP (Boot Parameters) is a protocol that allows workstations to obtain their startup operating system software and other parameters from a BOOTP Server host on the IP network. If enabled, the location of the BOOTP servers must be configured in the cdx6500PCTRbootpServTable MIB table. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 13 } cdx6500PCTRipParamBootpMaxHops OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "BOOTP Max Allowed Metric. The maximum cost metric (hop count) a BootP request is allowed to attain before being discarded. This is NOT the maximum number of IP hops to the BootP server." ::= { cdx6500PCTRouterGroup 14 } cdx6500PCTRipParamBootpSbf OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "BOOTP Seconds Before Forward. The number of seconds the router will wait for a BOOT request to be repeated before forwarding the request to BOOTP Server." ::= { cdx6500PCTRouterGroup 15 } cdx6500PCTRipParamEgpSysNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "EGP System Number. Configures the router's Autonomous System Number, as assigned by the Internet Network Information Center. The Exterior Gateway Protocol (EGP) is used to communicate with the Internet backbone. Usually, all of the routers for one company are considered in a single Autonomous System (AS), and all must have the same EGP Autonomous system number. EGP is used by the one (or two, for backup) of a company's gateway routers that connect to an administered Internet backbone such as Milnet or NSFnet." ::= { cdx6500PCTRouterGroup 16 } cdx6500PCTRipParamEgpReadvert OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "EGP Readvertise. Globally Enables/Disables the readvertisement of EGP routes which were originally learned from EGP. When Enabled, the learned routes are advertised locally with RIP or OSPF. The particular EGP neighbors from which routes are learned are specified with the cdx6500PCTRegpAsTable table. The particular networks which are learned can be specified with the cdx6500PCTRinInterchTable table. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 17 } cdx6500PCTRipParamRip OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "RIP Enable. Globally Enables/Disables RIP protocol processing for the router. The Routing Information Protocol (RIP) was the original internal gateway routing protocol used for IP networks, and is suitable for moderate size organization networks. An organization may operate both RIP and OSPF simultaneously. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 18 } cdx6500PCTRipParamRipOrigDef OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Originate Default Route. Enables origination and RIP advertisement of the default IP route 0.0.0.0. Default route advertisements must also be explicitly enabled for each interface. The router will originate the default route only when it has EGP-derived or external OSPF routes in its routing table. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 19 } cdx6500PCTRipParamAdvDefMetCost OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "Advertised Default Metric Cost. Sets the cost metric (usually the number of hops) that RIP will advertise for the default route of 0.0.0.0. A metric of 16 advertises that the default route is unreachable." ::= { cdx6500PCTRouterGroup 20 } cdx6500PCTRipParamNextHopDefGway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Default Gateway. The IP address of the default gateway -this- router will use when a packet's destination route is otherwise unknown. The next hop must be to a router on a directly attached network." ::= { cdx6500PCTRouterGroup 21 } cdx6500PCTRipParamDistDefGway OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Default Gateway Metric. The cost metric for a transmission to this router's default gateway, usually given as the number of network hops." ::= { cdx6500PCTRouterGroup 22 } cdx6500PCTRipParamRoutTableSize OBJECT-TYPE SYNTAX INTEGER (64..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Routing Table Size. The maximum number of routes that may be stored in the IP routing table." ::= { cdx6500PCTRouterGroup 23 } cdx6500PCTRipParamDirBcast OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Directed Broadcast. Enables/Disables the forwarding of IP packets whose destination is a non-local (remote LAN) broadcast address. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 24 } cdx6500PCTRipParamInternalNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is entered in dotted notation and configures the 32-bit IP Subnetwork Address Mask associated with the Internal interface created when the Internal Address is added to the router configuration parameters. The Internal Network address is derived from the configured Internal address and Internal Network Mask parameter." ::= { cdx6500PCTRouterGroup 25 } cdx6500PCTRipParamInternalIpAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This is an IP Address that becomes the Default IP Address for the router. The Default IP Address is used as the IP source address of PING and ICMP frames originated from the router to unnumbered interfaces and it is the reported IP Address in SNMP Trap frames. A Internal Network is added to the router routing table with the network address derived from the configured Internal address and Internal Network Mask parameter. If Internal IP Address is left undefined or the network part of this address matches network address of the configured router interfaces, Default IP Address becomes the IP address of the lowest numbered operational interface of the router." ::= { cdx6500PCTRouterGroup 26 } cdx6500PCTRipParamCacheSize OBJECT-TYPE SYNTAX INTEGER (64..10000) ACCESS read-write STATUS mandatory DESCRIPTION "IP Route Cache Size. The maximum number of entries that may be stored in the IP Route cache. The IP Route Cache holds the destination addresses of recently received packets and for each entry maintains a count of packets forwarded to that destination." ::= { cdx6500PCTRouterGroup 27 } cdx6500PCTRipParamReasmBuffSize OBJECT-TYPE SYNTAX INTEGER (2048.. 65535) ACCESS read-write STATUS mandatory DESCRIPTION "Reassembly Buffer Size. Sets the size (in bytes) of the IP fragment reassembly buffers. It must be set greater than the size of the largest IP packet to be transmitted on the organization's network." ::= { cdx6500PCTRouterGroup 28 } cdx6500PCTRipParamAccessCntrl OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Access Control. Globally enables or disables operation of the IP Access Control table. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 29 } cdx6500PCTRdefSubGwayTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRdefSubGwayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Default Subnet Gateway Table." ::= { cdx6500PCTRouterGroup 30 } cdx6500PCTRdefSubGwayEntry OBJECT-TYPE SYNTAX Cdx6500PCTRdefSubGwayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRdefSubGwayIndex } ::= { cdx6500PCTRdefSubGwayTable 1 } Cdx6500PCTRdefSubGwayEntry ::= SEQUENCE { cdx6500PCTRdefSubGwayIndex INTEGER, cdx6500PCTRdefSubGwaySubnetAd IpAddress, cdx6500PCTRdefSubGwayNextHopAd IpAddress, cdx6500PCTRdefSubGwayDistToGway INTEGER } cdx6500PCTRdefSubGwayIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRdefSubGwayEntry 1 } cdx6500PCTRdefSubGwaySubnetAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Top-Level IP Address. The top-level IP network number must be a class A, B, or C IP address. If this router receives a packet destined to an unknown subnet of that top level net, it will forward the packet to the default subnet router for that net." ::= { cdx6500PCTRdefSubGwayEntry 2 } cdx6500PCTRdefSubGwayNextHopAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Next Hop to Subnet Gateway. The IP address of the next hop towards a router performing subnet routing for the top-level net of this record. This next hop must be to an IP address on a network directly connected to this router." ::= { cdx6500PCTRdefSubGwayEntry 3 } cdx6500PCTRdefSubGwayDistToGway OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Metric to Subnet Gateway. The cost metric for a transmission to the default subnet gateway, usually the number of network hops to reach that other router." ::= { cdx6500PCTRdefSubGwayEntry 4 } cdx6500PCTRStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Route Table." ::= { cdx6500PCTRouterGroup 31 } cdx6500PCTRStaticRouteEntry OBJECT-TYPE SYNTAX Cdx6500PCTRStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRipRouteIndex } ::= { cdx6500PCTRStaticRouteTable 1 } Cdx6500PCTRStaticRouteEntry ::= SEQUENCE { cdx6500PCTRipRouteIndex INTEGER, cdx6500PCTRipRouteIpNetwork IpAddress, cdx6500PCTRipRouteIpMask IpAddress, cdx6500PCTRipRouteNextHop IpAddress, cdx6500PCTRipRouteCost INTEGER } cdx6500PCTRipRouteIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRStaticRouteEntry 1 } cdx6500PCTRipRouteIpNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Network/Subnet. The IP address of a destination network or subnetwork Host addresses are not included in the route table." ::= { cdx6500PCTRStaticRouteEntry 2 } cdx6500PCTRipRouteIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address Mask. The mask associated with the IP Network/Subnet address. For example: if the destination is a subnet of a class B network and the third byte of the IP address is used as the subnet portion, the address mask would be set to 255.255.255.0." ::= { cdx6500PCTRStaticRouteEntry 3 } cdx6500PCTRipRouteNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Next Hop. The IP address of the next hop to the destination. The next hop itself must be on an IP network directly connected to the router." ::= { cdx6500PCTRStaticRouteEntry 4 } cdx6500PCTRipRouteCost OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Cost. The distance or cost metric to the destination. It is interpreted as a number of hops." ::= { cdx6500PCTRStaticRouteEntry 5 } cdx6500PCTRoutInterchTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRoutInterchEntry ACCESS not-accessible STATUS optional DESCRIPTION "IP Output Interchange Table." ::= { cdx6500PCTRouterGroup 32 } cdx6500PCTRoutInterchEntry OBJECT-TYPE SYNTAX Cdx6500PCTRoutInterchEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRoutInterchIndex } ::= { cdx6500PCTRoutInterchTable 1 } Cdx6500PCTRoutInterchEntry ::= SEQUENCE { cdx6500PCTRoutInterchIndex INTEGER, cdx6500PCTRoutInterchInterchNeighAs INTEGER, cdx6500PCTRoutInterchSourceAs INTEGER, cdx6500PCTRoutInterchIpNetwork IpAddress, cdx6500PCTRoutInterchUseIgpMetric INTEGER, cdx6500PCTRoutInterchMetric INTEGER } cdx6500PCTRoutInterchIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRoutInterchEntry 1 } cdx6500PCTRoutInterchInterchNeighAs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Neighboring AS. The AS number assigned to an EGP neighbor. If nonzero, the value must match a Neighboring AS number entered in a IP EGP AS Information Table, cdx6500PCTRegpAsTable, entry. A value of 0 adds the route to the default Output Exchange Table, which is reported to all new EGP neighbors learned and not otherwise entered in the IP EGP AS Information table." ::= { cdx6500PCTRoutInterchEntry 2 } cdx6500PCTRoutInterchSourceAs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Source AS. A value of 0 indicates the route should be advertised regardless of the Autonomous System it was received from. A value other than 0 indicates the route should only be advertised if the route was received from the specified AS." ::= { cdx6500PCTRoutInterchEntry 3 } cdx6500PCTRoutInterchIpNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Network. The address of the local IP network for which routing information will be advertised." ::= { cdx6500PCTRoutInterchEntry 4 } cdx6500PCTRoutInterchUseIgpMetric OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), newvalOff (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Use IGP Metric. This parameter and the following Metric parameter, cdx6500PCTRoutInterchMetric, determine the cost reported to EGP of accessing the internal IP network. The two possible Interior Gateway Protocols (IGPs) are RIP or OSPF. If Use IGP metric is ON, the cost advertised to EGP will be identical to the locally reported routing table cost (from RIP or OSPF). If Use IGP metric OFF, the Metric parameter of this entry is reported. newvalOff : same functionality as 'off', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRoutInterchEntry 5 } cdx6500PCTRoutInterchMetric OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Metric. A configured cost of the route to the interior network, interpreted as a hop count. This cost is reported to EGP if the the Use IGP metric parameter, cdx6500PCTRoutInterchUseIgpMetric, is OFF." ::= { cdx6500PCTRoutInterchEntry 6 } cdx6500PCTRinInterchTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRinInterchEntry ACCESS not-accessible STATUS optional DESCRIPTION "IP Input Interchange Table." ::= { cdx6500PCTRouterGroup 33 } cdx6500PCTRinInterchEntry OBJECT-TYPE SYNTAX Cdx6500PCTRinInterchEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRinInterchIndex } ::= { cdx6500PCTRinInterchTable 1 } Cdx6500PCTRinInterchEntry ::= SEQUENCE { cdx6500PCTRinInterchIndex INTEGER, cdx6500PCTRinInterchNeighAs INTEGER, cdx6500PCTRinInterchIpNetwork IpAddress, cdx6500PCTRinInterchUseEgpMetric INTEGER, cdx6500PCTRinInterchMetric INTEGER } cdx6500PCTRinInterchIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRinInterchEntry 1 } cdx6500PCTRinInterchNeighAs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Neighboring AS. A neighboring Autonomous System to which route information will be readvertised via OSPF and RIP. A value of 0 adds the route to the default Input Exchange Table." ::= { cdx6500PCTRinInterchEntry 2 } cdx6500PCTRinInterchIpNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Network. The IP address of a network for which EGP received routing information." ::= { cdx6500PCTRinInterchEntry 3 } cdx6500PCTRinInterchUseEgpMetric OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), newvalOff (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Use EGP Metric. Defines the source of the internally readvertised costs of reaching the external IP network for this entry. If ON, the readvertised cost will be identical to the cost received by the EGP protocol. If OFF, the Metric parameter of this entry is reported. newvalOff : same functionality as 'off', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRinInterchEntry 4 } cdx6500PCTRinInterchMetric OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Metric. A configured cost of the route." ::= { cdx6500PCTRinInterchEntry 5 } cdx6500PCTRfilterTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRfilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Filter Table." ::= { cdx6500PCTRouterGroup 34 } cdx6500PCTRfilterEntry OBJECT-TYPE SYNTAX Cdx6500PCTRfilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTRfilterIndex } ::= { cdx6500PCTRfilterTable 1 } Cdx6500PCTRfilterEntry ::= SEQUENCE { cdx6500PCTRfilterIndex INTEGER, cdx6500PCTRfilterDstIpAd IpAddress, cdx6500PCTRfilterAdMask IpAddress } cdx6500PCTRfilterIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRfilterEntry 1 } cdx6500PCTRfilterDstIpAd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination IP Address. IP address of a network/subnet to filter. All packets destined for a filtered network are discarded, and no route to the filtered network is advertised." ::= { cdx6500PCTRfilterEntry 2 } cdx6500PCTRfilterAdMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Address Mask. Network (or Subnetwork) Address mask associated with the network/subnet address to filter." ::= { cdx6500PCTRfilterEntry 3 } -- After INDaa01565 enhancement, mib objects cdx6500PCTRifState1 to cdx6500PCTRifState36 -- are replaced by cdx6500PCTRifStateConfTable, but cdx6500PCTRifState1-36 is -- retained for backward compatibility. cdx6500PCTRifState1 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS optional DESCRIPTION "Interface #1 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 35 } cdx6500PCTRifState2 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #2 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 36 } cdx6500PCTRifState3 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #3 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 37 } cdx6500PCTRifState4 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #4 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 38 } cdx6500PCTRifState5 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #5 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 39 } cdx6500PCTRifState6 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #6 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 40 } cdx6500PCTRifState7 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #7 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 41 } cdx6500PCTRifState8 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #8 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 42 } cdx6500PCTRifState9 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #9 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 43 } cdx6500PCTRifState10 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #10 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 44 } cdx6500PCTRifState11 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #11 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 45 } cdx6500PCTRifState12 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #12 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 46 } cdx6500PCTRifState13 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #13 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 47 } cdx6500PCTRifState14 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #14 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 48 } cdx6500PCTRifState15 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #15 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 49 } cdx6500PCTRifState16 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #16 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 50 } cdx6500PCTRifState17 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #17 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 51 } cdx6500PCTRifState18 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #18 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 52 } cdx6500PCTRifState19 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #19 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 53 } cdx6500PCTRifState20 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #20 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 54 } cdx6500PCTRifState21 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #21 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 55 } cdx6500PCTRifState22 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #22 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 56 } cdx6500PCTRifState23 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #23 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 57 } cdx6500PCTRifState24 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #24 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 58 } cdx6500PCTRifState25 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #25 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 59 } cdx6500PCTRifState26 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #26 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 60 } cdx6500PCTRifState27 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #27 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 61 } cdx6500PCTRifState28 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #28 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 62 } cdx6500PCTRifState29 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #29 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 63 } cdx6500PCTRifState30 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #30 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 64 } cdx6500PCTRifState31 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #31 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 65 } cdx6500PCTRifState32 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #32 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 66 } cdx6500PCTRifState33 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #33 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 67 } cdx6500PCTRifState34 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #34 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 68 } cdx6500PCTRifState35 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #35 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 69 } cdx6500PCTRifState36 OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface #36 State. Enable/Disable all routing operations on the interface associated with this interface number. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 70 } cdx6500PCTReventsTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTReventsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Events Table." ::= { cdx6500PCTRouterGroup 71 } cdx6500PCTReventsEntry OBJECT-TYPE SYNTAX Cdx6500PCTReventsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP configurables." INDEX { cdx6500PCTReventsIndex } ::= { cdx6500PCTReventsTable 1 } Cdx6500PCTReventsEntry ::= SEQUENCE { cdx6500PCTReventsIndex INTEGER, cdx6500PCTReventsSubsystem INTEGER, cdx6500PCTReventsPerPktTrace INTEGER, cdx6500PCTReventsUnusualOper INTEGER, cdx6500PCTReventsCommonOper INTEGER } cdx6500PCTReventsIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTReventsEntry 1 } cdx6500PCTReventsSubsystem OBJECT-TYPE SYNTAX INTEGER { arp (0), ip (1), icmp (2), udp (3), rip (4), egp (5), ospf (6), ipx (7), tkr (8), eth (9), newvalArp (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Protocol. This field selects one of the protocols supported by the router. The event messages are controlled on a per-protocol basis. newvalArp : same functionality as 'arp', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTReventsEntry 2 } cdx6500PCTReventsPerPktTrace OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Per Packet Trace. If enabled, reports an event for every packet processed by the subsytem. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTReventsEntry 3 } cdx6500PCTReventsUnusualOper OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Unusual Operation. Enables/Disables reporting of unusual conditions such as detected packet format errors. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTReventsEntry 4 } cdx6500PCTReventsCommonOper OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), newvalDisabled (50) } ACCESS read-write STATUS mandatory DESCRIPTION "Common Operation. Enables/Disables reporting of commonly occurring events, such as receiving a RIP or OSPF update packet. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTReventsEntry 5 } cdx6500PCTRpriorityIpTraffic OBJECT-TYPE SYNTAX INTEGER { low (0), medium (1), high (2), newvalLow (50) } ACCESS read-write STATUS mandatory DESCRIPTION "IP Traffic Priority. Defines the priority for IP traffic relative to the rest of the traffic transmitted over WAN virtual circuits. If not configured, a default priority of HIGH is used. newvalLow : same functionality as 'low', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 72 } cdx6500PCTRpriorityIpxTraffic OBJECT-TYPE SYNTAX INTEGER { low (0), medium (1), high (2), newvalLow (50) } ACCESS read-write STATUS mandatory DESCRIPTION "IPX Traffic Priority. Defines the priority for IPX traffic relative to the rest of the traffic transmitted over WAN virtual circuits. If not configured, a default priority of HIGH is used. newvalLow : same functionality as 'low', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 73 } cdx6500PCTRMaxIpInterfaces OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the maximum number of IP Interfaces that may be configured" ::= { cdx6500PCTRouterGroup 74 } cdx6500PCTRAllSubnetBrcast OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables the duplication and forwarding of IP packets which are destined for all hosts on all subnetworks of an IP network." ::= { cdx6500PCTRouterGroup 75 } cdx6500PCTRIpFwdEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables the IP Broadcast Forwarding Feature." ::= { cdx6500PCTRouterGroup 76 } cdx6500PCTRUdpFwdEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables the UDP Broadcast Forwarding Feature." ::= { cdx6500PCTRouterGroup 77 } cdx6500PCTRpriorityAp2Traffic OBJECT-TYPE SYNTAX INTEGER { low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "AppleTalk Traffic Priority. Defines the priority for AppleTalk traffic relative to the rest of the traffic transmitted over WAN virtual circuits. If not configured, a default priority of HIGH is used. newvalLow : same functionality as 'low', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRouterGroup 78 } cdx6500PCTRarpParamMaxQueue OBJECT-TYPE SYNTAX INTEGER (0..50) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the maximum Protocol packets which can be queued awaiting address resolution." ::= { cdx6500PCTRouterGroup 79 } cdx6500PCTRarpParamTimeRetx OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Time(in seconds) to resend an ARP Request for a protocol address awaiting resolution." ::= { cdx6500PCTRouterGroup 80 } cdx6500PCTRRIPRouteControlTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRRIPRouteControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP RIP Route Control Table." ::= { cdx6500PCTRouterGroup 81 } cdx6500PCTRifStateConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRifStateConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Interfaces States Table." ::= { cdx6500PCTRouterGroup 83 } cdx6500PCTRifStateConfEntry OBJECT-TYPE SYNTAX Cdx6500PCTRifStateConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row of IP Interfaces States configurables." INDEX { cdx6500PCTRifStateConfIndex } ::= { cdx6500PCTRifStateConfTable 1 } Cdx6500PCTRifStateConfEntry ::= SEQUENCE { cdx6500PCTRifStateConfIndex INTEGER, cdx6500PCTRifStateConfState INTEGER } cdx6500PCTRifStateConfIndex OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index (Corresponds to Interface Number Configured). Note: If Index N is not shown, it means Interface Number N State record is not present in the cmem." ::= { cdx6500PCTRifStateConfEntry 1 } cdx6500PCTRifStateConfState OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1), unconfigured (2), newvalDisabled (50) } ACCESS read-only STATUS mandatory DESCRIPTION "Interfaces State. Enable/Disable all routing operations on the interface associated with this interface number. (The interface number is the cdx6500PCTRifStateConfIndex) newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility." ::= { cdx6500PCTRifStateConfEntry 2 } cdx6500PCTRRIPRouteControlEntry OBJECT-TYPE SYNTAX Cdx6500PCTRRIPRouteControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP RIP Route Control Table." INDEX { cdx6500PCTRRIPRouteControlIndex } ::= { cdx6500PCTRRIPRouteControlTable 1 } Cdx6500PCTRRIPRouteControlEntry ::= SEQUENCE { cdx6500PCTRRIPRouteControlIndex INTEGER, cdx6500PCTRRIPRouteControlIpNet IpAddress, cdx6500PCTRRIPRouteControlIpMsk IpAddress, cdx6500PCTRRRCInIniface DisplayString, cdx6500PCTRRRCOutIniface DisplayString } cdx6500PCTRRIPRouteControlIndex OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRRIPRouteControlEntry 1 } cdx6500PCTRRIPRouteControlIpNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Network/subnet. IP address which identifies a destination network or subnetwork for which RIP route information is accepted. The route is accepted from any received RIP packet, and overrides any disabled Learn Net Route or Learn Subnet Route setting." ::= { cdx6500PCTRRIPRouteControlEntry 2 } cdx6500PCTRRIPRouteControlIpMsk OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Address Mask. Adress mask to be applied to the IP network/subnetwork address. The incoming route's IP address is logically 'AND-ed' with it's mask and the result is comparedwith the result of the logical 'ANDing' of the configured IP address and mask. For example, a mask of 255.0.0.0 with a result of 129.0.0.0 will match any route with 129 in the first byte. A mask of 0.0.0.0 indicates that this parameter will not be used. This parameter will only be used for RIPv2 routes." ::= { cdx6500PCTRRIPRouteControlEntry 3 } cdx6500PCTRRRCInIniface OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Inbound interface list. This parameter specifies a list of interfaces on which the RIP route information is accepted. A maximum of 8 ranges are permitted to be configured in this list : the list may be extended by configuring new entries with the same IP network/subnet address. Ex: 1, 5, 7-10, 20-25,31 ALL : This option is a wildcard used to match all interfaces. NONE : This indicates that no inbound RIP route control is required for this IP network/subnetwork address." ::= { cdx6500PCTRRIPRouteControlEntry 4 } cdx6500PCTRRRCOutIniface OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Outbound interface list. This parameter specifies a list of interfaces on which the RIP route information is advertised. A maximum of 8 ranges are permitted to be configured in this list : the list may be extended by configuring new entries with the same IP network/subnet address. Ex: 1, 5, 7-10, 20-25,31 ALL : This option is a wildcard used to match all interfaces. NONE : This indicates that no inbound RIP route control is required for this IP network/subnetwork address." ::= { cdx6500PCTRRIPRouteControlEntry 5 } -- Router Group -- Proteon Router Statistics proProtoIpDefGwAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS optional DESCRIPTION "The Internet address of the default gateway for the router." ::= { cdx6500PSTRouterGroup 1 } proProtoIpDefGwCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The cost of the default gateway for the router." ::= { cdx6500PSTRouterGroup 2 } proProtoIpDefGwAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The age of the default gateway for the router." ::= { cdx6500PSTRouterGroup 3 } --Tunnel config cdx6500PCTRtunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PCTRtunnelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Tunnel Table" ::= { cdx6500PCTRouterGroup 82 } --The above index has to be verified and changed if necessary. cdx6500PCTRtunnelEntry OBJECT-TYPE SYNTAX Cdx6500PCTRtunnelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Tunnel configurables." INDEX { cdx6500PCTRtunnelIndex } ::= { cdx6500PCTRtunnelTable 1 } Cdx6500PCTRtunnelEntry ::= SEQUENCE { cdx6500PCTRtunnelIndex INTEGER, cdx6500PCTRtunnelProt INTEGER, cdx6500PCTRtunnelGreCksSqn DisplayString, cdx6500PCTRtunnelGreResyncCntr INTEGER, cdx6500PCTRtunnelSrcAddr IpAddress, cdx6500PCTRtunnelDstAddr IpAddress, cdx6500PCTRtunnelLconNo INTEGER, cdx6500PCTRtunnelPayProt INTEGER, cdx6500PCTRtunnelIfNo INTEGER, cdx6500PCTRtunnelRtpHdrComProf DisplayString, cdx6500PCTRtunnelBrdgLnkNo INTEGER, cdx6500PCTRtunnelEncrProf DisplayString, cdx6500PCTRtunnelDebug INTEGER } cdx6500PCTRtunnelIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index." ::= { cdx6500PCTRtunnelEntry 1 } cdx6500PCTRtunnelDstAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Destination Address.This is the destination address of the tunnel. This address is put into the destination field of the tunnel packet. This field cannot be 0.0.0.0 or un-numbered address." ::= { cdx6500PCTRtunnelEntry 6 } cdx6500PCTRtunnelSrcAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Source Address. This is the source address of the tunnel. This address is put into the source field of the tunnel packet." ::= { cdx6500PCTRtunnelEntry 5 } cdx6500PCTRtunnelLconNo OBJECT-TYPE SYNTAX INTEGER (1..2000) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the LCON which will be used to forward the tunneled packet. If the value got is '0', then it means that this is a LAN TUNNEL with cdx6500PCTRtunnelLANnxthopAddr specifing Nexthop IP address corresponding to a LAN interface. Non-Zero value indicates this as a WAN TUNNEL. 1-MAX-LCON => For tunnels going on WAN link. 0 => For tunnels going on LAN link. " ::= { cdx6500PCTRtunnelEntry 7 } cdx6500PCTRtunnelIfNo OBJECT-TYPE SYNTAX INTEGER (5..1000) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the router interface number used by this tunnel. If the value got is '0', it means that the value has not been prompted in the Tunnel Table." ::= { cdx6500PCTRtunnelEntry 9 } cdx6500PCTRtunnelEncrProf OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the profile name of the encryption profile table." ::= { cdx6500PCTRtunnelEntry 12 } cdx6500PCTRtunnelProt OBJECT-TYPE SYNTAX INTEGER { gre (1), l2tp (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the protocol used for tunneling. This defaults to GRE (Generic Routing Encapsulation)" ::= { cdx6500PCTRtunnelEntry 2 } cdx6500PCTRtunnelGreCksSqn OBJECT-TYPE SYNTAX DisplayString (SIZE(3..20)) ACCESS read-only STATUS mandatory DESCRIPTION " This parameter enables or disables the GRE configuration. CKS enables end-to-end checksum, SQN enables sequence number. A combination of these can also be specified. Example : CKS+SQN" ::= { cdx6500PCTRtunnelEntry 3 } cdx6500PCTRtunnelPayProt OBJECT-TYPE SYNTAX DisplayString (SIZE(2..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the accepted protocol types of the payload data. A combination of these can also be specified (for instance:IP+IPX). If the packet protocol type doesn't match the configured protocol type ,the packet is dropped." ::= { cdx6500PCTRtunnelEntry 8 } cdx6500PCTRtunnelDebug OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (0) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter enables reports for diagnostic purposes in the data passing state." ::= { cdx6500PCTRtunnelEntry 13 } cdx6500PCTRtunnelLANnxthopAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " LAN Next Hop IP address. This parameter specifies the LAN Next hop IP address corresponding to a LAN interface which will be used to forward the tunneled packets for LAN tunnel." ::= { cdx6500PCTRtunnelEntry 14 } cdx6500PCTRtunnelRtpHdrComProf OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) ACCESS read-only STATUS mandatory DESCRIPTION " This parameter specifies the profile name in the RTP/UDP/IP compression profile table." ::= { cdx6500PCTRtunnelEntry 10 } cdx6500PCTRtunnelGreResyncCntr OBJECT-TYPE SYNTAX INTEGER (0..64) ACCESS read-only STATUS mandatory DESCRIPTION " This parameter specifies the Resynchronisation Counter that is used by the receiver. If the value got is '0', it means that the value has not been prompted in the Tunnel Table" ::= { cdx6500PCTRtunnelEntry 4 } cdx6500PCTRtunnelBrdgLnkNo OBJECT-TYPE SYNTAX INTEGER (5..1000) ACCESS read-only STATUS mandatory DESCRIPTION " This parameter specifies the bridge link used by this tunnel. If the value got is '0', it means that the value has not been prompted in the Tunnel Table." ::= { cdx6500PCTRtunnelEntry 11 } --Tunnel Statistics cdx6500PSTRtunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500PSTRtunnelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Tunnel Statistics Table" ::= { cdx6500PSTRouterGroup 4 } --The above mentioned number has to be verified and changed if necessary. cdx6500PSTRtunnelEntry OBJECT-TYPE SYNTAX Cdx6500PSTRtunnelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Tunnel Statistics." INDEX { cdx6500PSTRtunnelIndex } ::= { cdx6500PSTRtunnelTable 1 } Cdx6500PSTRtunnelEntry ::= SEQUENCE { cdx6500PSTRtunnelIndex INTEGER, cdx6500PSTRtunnelIpPktIn INTEGER, cdx6500PSTRtunnelIpPktOut INTEGER, cdx6500PSTRtunnelIpPktDisc INTEGER, cdx6500PSTRtunnelIpxPktIn INTEGER, cdx6500PSTRtunnelIpxPktOut INTEGER, cdx6500PSTRtunnelIpxPktDisc INTEGER, cdx6500PSTRtunnelSrcAddr IpAddress, cdx6500PSTRtunnelDstAddr IpAddress, cdx6500PSTRtunnelPayProt INTEGER, cdx6500PSTRtunnelEncrStatus DisplayString, cdx6500PSTRtunnelRuihcStatus INTEGER, cdx6500PSTRtunnelBrdgPktIn INTEGER, cdx6500PSTRtunnelBrdgPktOut INTEGER, cdx6500PSTRtunnelBrdgPktDisc INTEGER } cdx6500PSTRtunnelIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Table Index" ::= { cdx6500PSTRtunnelEntry 1 } cdx6500PSTRtunnelIpPktIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of IP packets that have been received by the tunnel." ::= { cdx6500PSTRtunnelEntry 2 } cdx6500PSTRtunnelIpPktOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of IP packets that have been sent out by the tunnel." ::= { cdx6500PSTRtunnelEntry 3 } cdx6500PSTRtunnelIpPktDisc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of IP packets that have been discarded by the tunnel." ::= { cdx6500PSTRtunnelEntry 4 } cdx6500PSTRtunnelIpxPktIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of IPX packets that have been received by the tunnel." ::= { cdx6500PSTRtunnelEntry 5 } cdx6500PSTRtunnelIpxPktOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of IPX packets that have been sent out by the tunnel." ::= { cdx6500PSTRtunnelEntry 6 } cdx6500PSTRtunnelIpxPktDisc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of IPX packets that have been discarded by the tunnel." ::= { cdx6500PSTRtunnelEntry 7 } cdx6500PSTRtunnelSrcAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Source Address. This is the source address of the tunnel. This address is put into the source field of the tunnel packet." ::= { cdx6500PSTRtunnelEntry 8 } cdx6500PSTRtunnelDstAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Destination Address.This is the destination address of the tunnel. This address is put into the destination field of the tunnel packet. This field cannot be 0.0.0.0 or un-numbered address." ::= { cdx6500PSTRtunnelEntry 9 } cdx6500PSTRtunnelPayProt OBJECT-TYPE SYNTAX INTEGER { ip (1), ipx (2), brg (4), ip-ipx (3), ip-brg (5), ipx-brg (6), ip-ipx-brg (7) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the accepted protocol types of the payload data. A combination of thse can also be specified (for instance:IP+IPX+BRG). If the packet protocol type doesn't match the configured protocol type ,the packet is dropped." ::= { cdx6500PSTRtunnelEntry 10 } cdx6500PSTRtunnelEncrStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(2..16)) ACCESS read-only STATUS mandatory DESCRIPTION " This parameter gives the status of the ENCRYPTION Channel " ::= { cdx6500PSTRtunnelEntry 11 } cdx6500PSTRtunnelRuihcStatus OBJECT-TYPE SYNTAX INTEGER { ena (1), dis (2) } ACCESS read-only STATUS mandatory DESCRIPTION " This parameter gives the status of the RTP/UDP/IP Header Compression of the given tunnel" ::= { cdx6500PSTRtunnelEntry 12 } cdx6500PSTRtunnelBrdgPktIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of BRIDGE packets that have been received by the tunnel." ::= { cdx6500PSTRtunnelEntry 13 } cdx6500PSTRtunnelBrdgPktOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of BRIDGE packets that have been sent out by the tunnel." ::= { cdx6500PSTRtunnelEntry 14 } cdx6500PSTRtunnelBrdgPktDisc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the number of BRIDGE packets that have been discarded by the tunnel." ::= { cdx6500PSTRtunnelEntry 15 } END