ROUTER-OPT-MIB :: cdx6500PCTRipParamEgpSysNum

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ROUTER-OPT-MIB › cdx6500PCTRipParamEgpSysNum

cdx6500PCTRipParamEgpSysNum

Module: ROUTER-OPT-MIB

OID (symbolic): ROUTER-OPT-MIB::cdx6500PCTRipParamEgpSysNum

OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.5.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: EGP System Number. Configures the router's Autonomous System Number, as assigned by the Internet Network Information Center. The Exterior Gateway Protocol (EGP) is used to communicate with the Internet backbone. Usually, all of the routers for one company are considered in a single Autonomous System (AS), and all must have the same EGP Autonomous system number. EGP is used by the one (or two, for backup) of a company's gateway routers that connect to an administered Internet backbone such as Milnet or NSFnet.

What is cdx6500PCTRipParamEgpSysNum?

The router's own Autonomous System number, as assigned by the Internet Network Information Center, used for EGP exchanges with the Internet backbone. All routers belonging to the same organization normally share one EGP AS number, configured here by the admin.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.5.16
snmpwalk -v2c -c public <target> ROUTER-OPT-MIB::cdx6500PCTRipParamEgpSysNum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.5.16.1
snmpget -v2c -c public <target> ROUTER-OPT-MIB::cdx6500PCTRipParamEgpSysNum.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.1.5.16.1 i <value>

Start monitoring network router, vendor unconfirmed from available source data (optional feature configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ROUTER-OPT-MIB::cdx6500PCTRipParamEgpSysNum OID value, configure state conditions and alerts, and monitor any network router, vendor unconfirmed from available source data (optional feature configuration) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1cdx6500CfgProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.5cdx6500PCTRouterGroupCDX6500-SMI
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.1.5.16cdx6500PCTRipParamEgpSysNumROUTER-OPT-MIB