ROUTER-OPT-MIB :: cdx6500PCTRarpParamProxy

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ROUTER-OPT-MIB › cdx6500PCTRarpParamProxy

cdx6500PCTRarpParamProxy

Module: ROUTER-OPT-MIB

OID (symbolic): ROUTER-OPT-MIB::cdx6500PCTRarpParamProxy

OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.5.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Proxy ARP. Enables the router to respond as proxy for hosts on different nets reachable from the router. Normal ARP operation calls for hosts to send an ARP request only for destinations that are on the same IP network (or subnetwork) as the requester. Some IP hosts, however, ARP even for off-network IP destination hosts. This parameter enables the router to respond as a proxy for such off-network hosts, causing the source to properly send off-network packets to the router. The router will respond only if the destination network/subnetwork is in its IP Routing Table. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility.

What is cdx6500PCTRarpParamProxy?

Globally enables or disables Proxy ARP, where the router answers ARP requests on behalf of off-network hosts that are in its IP routing table, so that clients configured without a correct default gateway can still reach them. newvalDisabled is functionally identical to disabled, kept only as an RFC1155-compatible enumeration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.5.5
snmpwalk -v2c -c public <target> ROUTER-OPT-MIB::cdx6500PCTRarpParamProxy

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.5.5.1
snmpget -v2c -c public <target> ROUTER-OPT-MIB::cdx6500PCTRarpParamProxy.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.1.5.5.1 i <value>

Start monitoring network router, vendor unconfirmed from available source data (optional feature configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ROUTER-OPT-MIB::cdx6500PCTRarpParamProxy OID value, configure state conditions and alerts, and monitor any network router, vendor unconfirmed from available source data (optional feature configuration) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1cdx6500CfgProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.5cdx6500PCTRouterGroupCDX6500-SMI
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.1.5.5cdx6500PCTRarpParamProxyROUTER-OPT-MIB