All MIBs › RMON2-MIB › serialConnectType
serialConnectType
Module: RMON2-MIB
OID (symbolic): RMON2-MIB::serialConnectType
OID (numeric): 1.3.6.1.2.1.16.19.14.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
The type of outgoing connection to make. If this object has the value direct(1), then a direct serial connection is assumed. If this object has the value modem(2), then serialConnectDialString will be used to make a modem connection. If this object has the value switch(3),
then serialConnectSwitchConnectSeq will be used to establish the connection over a serial data switch, and serialConnectSwitchDisconnectSeq will be used to terminate the connection. If this object has the value modem-switch(4), then a modem connection will be made first followed by the switch connection.
This object may not be modified if the associated serialConnectStatus object is equal to active(1).
What is serialConnectType?
This number specifies how the serial connection is established: direct wired(1), modem dial-up(2), data switch(3), or modem-through-switch(4). Engineers select this based on available hardware and topology, determining which dialing or switching parameters are used. For example, 'modem(2)' means the system will dial out using the dialString.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.16 | rmon | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.19 | tftp | REMOTEACCESS-MIB |
| 1.3.6.1.2.1.16.19.14 | serialConnectionTable | RMON2-MIB |
| 1.3.6.1.2.1.16.19.14.1 | serialConnectionEntry | RMON2-MIB |
| 1.3.6.1.2.1.16.19.14.1.3 | serialConnectType | RMON2-MIB |