All MIBs › RIVERSTONE-MPLS-MIB › rsMPLSXCExtendedOperStatus
rsMPLSXCExtendedOperStatus
Module: RIVERSTONE-MPLS-MIB
OID (symbolic): RIVERSTONE-MPLS-MIB::rsMPLSXCExtendedOperStatus
OID (numeric): 1.3.6.1.4.1.5567.2.39.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object is the same as the mplsXCOperStatus during the normal operation. If the LSP has a Detour (Fast Reroute LSP), this value is set to rerouted (8), when the detour is used for transmitting the data path. At this time, the rsMPLSXCDetourXC will point to the cross-connect of the detour LSP. The mplsOutSegmentTopLabel value of the outsegment of this LSP will be set to 0 (invalid label).
When this LSP comes back up, again the value will change as mplsXCOperStatus and the rsMPLSXCDetourXC will be set to the ZeroDotZero OID. Also the mplsOutSegmentTopLabel will be set to the proper value.
What is rsMPLSXCExtendedOperStatus?
This read-only integer reports the extended operational status of an MPLS cross-connect, extending the standard mplsXCOperStatus with a rerouted(8) value used specifically when a Fast Reroute detour LSP is carrying the traffic. Admins watch this to detect when a protected LSP has failed over to its detour path, at which point rsMPLSXCDetourXC points to the detour's cross-connect and the top MPLS label is temporarily zeroed. For example, a value of rerouted(8) during a link outage tells the admin traffic is currently flowing over the fast-reroute detour rather than the primary path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5567.2.39.1.1.1.2 snmpwalk -v2c -c public <target> RIVERSTONE-MPLS-MIB::rsMPLSXCExtendedOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5567.2.39.1.1.1.2.1 snmpget -v2c -c public <target> RIVERSTONE-MPLS-MIB::rsMPLSXCExtendedOperStatus.1
Start monitoring Riverstone Networks router (MPLS cross-connect/LSP protection/detour status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RIVERSTONE-MPLS-MIB::rsMPLSXCExtendedOperStatus OID value, configure state conditions and alerts, and monitor any Riverstone Networks router (MPLS cross-connect/LSP protection/detour status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5567 | riverstoneNetworks | RIVERSTONE-SMI-MIB |
| 1.3.6.1.4.1.5567.2 | riverstoneMibs | RIVERSTONE-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5567.2.39 | rsMPLSMIB | RIVERSTONE-MPLS-MIB |
| 1.3.6.1.4.1.5567.2.39.1 | rsMPLSObjects | RIVERSTONE-MPLS-MIB |
| 1.3.6.1.4.1.5567.2.39.1.1 | rsMPLSXCExtTable | RIVERSTONE-MPLS-MIB |
| 1.3.6.1.4.1.5567.2.39.1.1.1 | rsMPLSXCExtEntry | RIVERSTONE-MPLS-MIB |
| 1.3.6.1.4.1.5567.2.39.1.1.1.2 | rsMPLSXCExtendedOperStatus | RIVERSTONE-MPLS-MIB |