All MIBs › RIVERSTONE-IMAGE-MIB › rsImageMibDestination
rsImageMibDestination
Module: RIVERSTONE-IMAGE-MIB
OID (symbolic): RIVERSTONE-IMAGE-MIB::rsImageMibDestination
OID (numeric): 1.3.6.1.4.1.5567.2.13.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Which flashcard(s) to perform the add, choose or delete operation on. The choices are: 1. first available flashcard in slot0 or slot1 of both the Primary and Backup Control Modules. For example, you may end up with slot0 of the Primary CM and slot1 of the Backup CM. 2. first available flashcard in slot0 or slot1 of just Primary CM; 3. first available flashcard in slot0 or slot1 of just Backup CM; 4. flashcard in slot0 of Primary CM; 5. flashcard in slot1 of Primary CM; 6. flashcard in slot0 of Backup CM; 7. flashcard in slot1 of Backup CM; Default is both cards.
What is rsImageMibDestination?
This object selects which flashcard(s) an add, choose, or delete operation should target: both(1, the default, first available card on either CM), pCM(2)/bCM(3) for the Primary or Backup CM generally, or specific slots pCMslot0/1(4/5) and bCMslot0/1(6/7). Admins set this to control exactly which control module's flashcard receives an image transfer or selection action, important in redundant chassis with Primary and Backup CMs. Setting this to bCMslot0(6) directs the operation specifically at slot 0 of the Backup Control Module rather than letting the system pick automatically.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5567.2.13.6 snmpwalk -v2c -c public <target> RIVERSTONE-IMAGE-MIB::rsImageMibDestination
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5567.2.13.6.1 snmpget -v2c -c public <target> RIVERSTONE-IMAGE-MIB::rsImageMibDestination.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5567.2.13.6.1 i <value>
Start monitoring Riverstone Networks RS-series routers (system software image management on PCMCIA flash) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RIVERSTONE-IMAGE-MIB::rsImageMibDestination OID value, configure state conditions and alerts, and monitor any Riverstone Networks RS-series routers (system software image management on PCMCIA flash) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5567 | riverstoneNetworks | RIVERSTONE-SMI-MIB |
| 1.3.6.1.4.1.5567.2 | riverstoneMibs | RIVERSTONE-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5567.2.13 | rsImageMib | RIVERSTONE-IMAGE-MIB |
| 1.3.6.1.4.1.5567.2.13.6 | rsImageMibDestination | RIVERSTONE-IMAGE-MIB |