All MIBs › RFC1406-MIB › dsx1SendCode

dsx1SendCode

Module: RFC1406-MIB

OID (symbolic): RFC1406-MIB::dsx1SendCode

OID (numeric): 1.3.6.1.2.1.10.18.6.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean:

dsx1SendNoCode sending looped or normal data

dsx1SendLineCode sending a request for a line loopback

dsx1SendPayloadCode sending a request for a payload loopback dsx1SendResetCode sending a loopback termination request

dsx1SendQRS sending a Quasi-Random Signal (QRS) test pattern

dsx1Send511Pattern sending a 511 bit fixed test pattern

dsx1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24

dsx1SendOtherTestPattern sending a test pattern other than those described by this object

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.7
snmpwalk -v2c -c public <target> RFC1406-MIB::dsx1SendCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.7.1
snmpget -v2c -c public <target> RFC1406-MIB::dsx1SendCode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.18.6.1.7.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dsx1SendCode.1

OID Breakdown

RFC1406-MIB :: dsx1SendCode