All MIBs › RFC1406-MIB › dsx1LoopbackConfig
dsx1LoopbackConfig
Module: RFC1406-MIB
OID (symbolic): RFC1406-MIB::dsx1LoopbackConfig
OID (numeric): 1.3.6.1.2.1.10.18.6.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean:
dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value.
dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function.
dsx1LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out.
dsx1OtherLoop Loopbacks that are not defined here.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.9 snmpwalk -v2c -c public <target> RFC1406-MIB::dsx1LoopbackConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.9.1 snmpget -v2c -c public <target> RFC1406-MIB::dsx1LoopbackConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.18.6.1.9.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.18 | ds1 | DS1-MIB |
| 1.3.6.1.2.1.10.18.6 | dsx1ConfigTable | DS1-MIB |
| 1.3.6.1.2.1.10.18.6.1 | dsx1ConfigEntry | DS1-MIB |
| 1.3.6.1.2.1.10.18.6.1.9 | dsx1LoopbackConfig | RFC1406-MIB |