All MIBs › RFC1406-MIB › dsx1Fdl
dsx1Fdl
Module: RFC1406-MIB
OID (symbolic): RFC1406-MIB::dsx1Fdl
OID (numeric): 1.3.6.1.2.1.10.18.6.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties:
'other' indicates that a protocol other than one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does not use the FDL.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.13 snmpwalk -v2c -c public <target> RFC1406-MIB::dsx1Fdl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.13.1 snmpget -v2c -c public <target> RFC1406-MIB::dsx1Fdl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.18.6.1.13.1 i <value>
Start monitoring T1/DS1 WAN interface cards, channel banks and CSU/DSUs, vendor-neutral standards-based MIB with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1406-MIB::dsx1Fdl OID value, configure state conditions and alerts, and monitor any T1/DS1 WAN interface cards, channel banks and CSU/DSUs, vendor-neutral standards-based MIB from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.18 | ds1 | DS1-MIB |
| 1.3.6.1.2.1.10.18.6 | dsx1ConfigTable | DS1-MIB |
| 1.3.6.1.2.1.10.18.6.1 | dsx1ConfigEntry | DS1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.18.6.1.13 | dsx1Fdl | RFC1406-MIB |