RFC1286-MIB :: dot1dSrPort

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRFC1286-MIBdot1dSrPort

dot1dSrPort

Module: RFC1286-MIB

OID (symbolic): RFC1286-MIB::dot1dSrPort

OID (numeric): 1.3.6.1.2.1.17.3.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The port number of the port for which this entry contains Source Route management information.

What is dot1dSrPort?

This object reports the bridge port number for which the current row in the source routing table holds management information. An admin correlates this value to a physical port on the bridge when investigating source-routed traffic behavior on a specific segment. For example, dot1dSrPort might return 3 to identify the entry describing port 3's source routing settings.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.17.3.1.1.1
snmpwalk -v2c -c public <target> RFC1286-MIB::dot1dSrPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.17.3.1.1.1.1
snmpget -v2c -c public <target> RFC1286-MIB::dot1dSrPort.1

Start monitoring vendor-neutral, standards-based MIB, Ethernet/Token Ring transparent bridges and early Layer 2 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1286-MIB::dot1dSrPort OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, Ethernet/Token Ring transparent bridges and early Layer 2 switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.17dot1dBridgeBRIDGE-MIB
1.3.6.1.2.1.17.3dot1dSrBRIDGE-MIB
Numeric OIDNameModule
1.3.6.1.2.1.17.3.1dot1dSrPortTableRFC1286-MIB
1.3.6.1.2.1.17.3.1.1dot1dSrPortEntryRFC1286-MIB
1.3.6.1.2.1.17.3.1.1.1dot1dSrPortRFC1286-MIB