All MIBs › RFC1231-MIB › dot5TimerQueuePDU
dot5TimerQueuePDU
Module: RFC1231-MIB
OID (symbolic): RFC1231-MIB::dot5TimerQueuePDU
OID (numeric): 1.3.6.1.2.1.10.9.5.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The time-out value for enqueuing of an SMP PDU after reception of an AMP or SMP frame in which the A and C bits were equal to 0, in units of 100 micro-seconds. Implementors are encouraged to provide
read-write access to this object if that is possible/useful in their system, but giving due consideration to the dangers of write-able timers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.9.5.1.4 snmpwalk -v2c -c public <target> RFC1231-MIB::dot5TimerQueuePDU
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.9.5.1.4.1 snmpget -v2c -c public <target> RFC1231-MIB::dot5TimerQueuePDU.1
Start monitoring vendor-neutral, standards-based MIB, IEEE 802.5 Token Ring network interface/adapter, bridge or router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1231-MIB::dot5TimerQueuePDU OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.5 Token Ring network interface/adapter, bridge or router from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.9 | dot5 | RFC1231-MIB |
| 1.3.6.1.2.1.10.9.5 | dot5TimerTable | RFC1231-MIB |
| 1.3.6.1.2.1.10.9.5.1 | dot5TimerEntry | RFC1231-MIB |
| 1.3.6.1.2.1.10.9.5.1.4 | dot5TimerQueuePDU | RFC1231-MIB |