All MIBs › RFC1231-MIB › dot5StatsLineErrors
dot5StatsLineErrors
Module: RFC1231-MIB
OID (symbolic): RFC1231-MIB::dot5StatsLineErrors
OID (numeric): 1.3.6.1.2.1.10.9.2.1.2
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditions exists: 1) there is a non-data bit (J or K bit) between the SD and the ED of the frame or token, or 2) there is an FCS error in the frame.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.9.2.1.2 snmpwalk -v2c -c public <target> RFC1231-MIB::dot5StatsLineErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.9.2.1.2.1 snmpget -v2c -c public <target> RFC1231-MIB::dot5StatsLineErrors.1
Start monitoring vendor-neutral, standards-based MIB, IEEE 802.5 Token Ring network interface/adapter, bridge or router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1231-MIB::dot5StatsLineErrors OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.5 Token Ring network interface/adapter, bridge or router from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.9 | dot5 | RFC1231-MIB |
| 1.3.6.1.2.1.10.9.2 | dot5StatsTable | RFC1231-MIB |
| 1.3.6.1.2.1.10.9.2.1 | dot5StatsEntry | RFC1231-MIB |
| 1.3.6.1.2.1.10.9.2.1.2 | dot5StatsLineErrors | RFC1231-MIB |