All MIBs › REPEATER-MIB-2 › redundancyPollInterval
redundancyPollInterval
Module: REPEATER-MIB-2
OID (symbolic): REPEATER-MIB-2::redundancyPollInterval
OID (numeric): 1.3.6.1.4.1.52.1.2.1.8.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The number of seconds between polls for redundancy. The minimum is 0 and the maximum is 99.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.1.2.1.8.1 snmpwalk -v2c -c public <target> REPEATER-MIB-2::redundancyPollInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.1.2.1.8.1.1 snmpget -v2c -c public <target> REPEATER-MIB-2::redundancyPollInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.1.2.1.8.1.1 i <value>
Start monitoring vendor-neutral, standards-based MIB (IEEE 802.3 repeater/hub), extended device identity/slot inventory with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB-2::redundancyPollInterval OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (IEEE 802.3 repeater/hub), extended device identity/slot inventory from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.1 | commsDevice | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.2 | repeater | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.2.1 | repeaterRev1 | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.2.1.8 | redundancy | Cabletron-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.1.2.1.8.1 | redundancyPollInterval | REPEATER-MIB-2 |