All MIBs › REPEATER-MIB-2 › redundancyCircuitReset
redundancyCircuitReset
Module: REPEATER-MIB-2
OID (symbolic): REPEATER-MIB-2::redundancyCircuitReset
OID (numeric): 1.3.6.1.4.1.52.1.2.1.8.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A get will return 0. A set of 1 will reset the indicated circuit, return all of the associated board and ports to NOT-USED, remove associated addresses from the polling list, reset the circuit name and retry count to default values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.1.2.1.8.15 snmpwalk -v2c -c public <target> REPEATER-MIB-2::redundancyCircuitReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.1.2.1.8.15.1 snmpget -v2c -c public <target> REPEATER-MIB-2::redundancyCircuitReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.1.2.1.8.15.1 i <value>
Start monitoring vendor-neutral, standards-based MIB (IEEE 802.3 repeater/hub), extended device identity/slot inventory with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB-2::redundancyCircuitReset OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (IEEE 802.3 repeater/hub), extended device identity/slot inventory from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.1 | commsDevice | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.2 | repeater | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.2.1 | repeaterRev1 | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.2.1.8 | redundancy | Cabletron-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.1.2.1.8.15 | redundancyCircuitReset | REPEATER-MIB-2 |