All MIBs › REPEATER-MIB-2 › deviceThdPartyOccupiedSlots

deviceThdPartyOccupiedSlots

OID (symbolic): REPEATER-MIB-2::deviceThdPartyOccupiedSlots

OID (numeric): 1.3.6.1.4.1.52.1.2.1.1.51

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is a Third Party MIM.) For example, a value of 4 indicates that there is a board in the third MIM slot (slot 4) and that this board is a Third Party MIM.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.1.2.1.1.51
snmpwalk -v2c -c public <target> REPEATER-MIB-2::deviceThdPartyOccupiedSlots

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.1.2.1.1.51.1
snmpget -v2c -c public <target> REPEATER-MIB-2::deviceThdPartyOccupiedSlots.1

Start monitoring vendor-neutral, standards-based MIB (IEEE 802.3 repeater/hub), extended device identity/slot inventory with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB-2::deviceThdPartyOccupiedSlots OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (IEEE 802.3 repeater/hub), extended device identity/slot inventory from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.52	cabletron	Cabletron-MIB
1.3.6.1.4.1.52.1	commsDevice	Cabletron-MIB
1.3.6.1.4.1.52.1.2	repeater	Cabletron-MIB
1.3.6.1.4.1.52.1.2.1	repeaterRev1	Cabletron-MIB
1.3.6.1.4.1.52.1.2.1.1	device	Cabletron-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.52.1.2.1.1.51	deviceThdPartyOccupiedSlots	REPEATER-MIB-2

REPEATER-MIB-2 :: deviceThdPartyOccupiedSlots

deviceThdPartyOccupiedSlots

Also defined in

Module

This MIB depends on