REDSTONE-IP-MIB :: rsIpRouteStaticStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REDSTONE-IP-MIB › rsIpRouteStaticStatus

rsIpRouteStaticStatus

Module: REDSTONE-IP-MIB

OID (symbolic): REDSTONE-IP-MIB::rsIpRouteStaticStatus

OID (numeric): 1.3.6.1.4.1.2773.2.12.1.3.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The operational status of this static route.

active(0) indicates this route is currently being used to reach the specified destination.

inactive(1) indicates this route is considered valid, but currently is superseded by another routing table entry for the destination, having a higher preference value.

incomplete(2) indicates this route entry contains information that is incomplete, or is inconsistent with other system configuration (for example, the interface specified in rsIpRouteStaticIfIndex does not exist).

What is rsIpRouteStaticStatus?

Reports this static route's operational state: active(0) if it is currently being used, inactive(1) if a higher-preference route to the same destination has superseded it, or incomplete(2) if something about the route (such as a missing interface) is inconsistent; an admin checks this to see why a configured static route isn't taking effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2773.2.12.1.3.2.1.7
snmpwalk -v2c -c public <target> REDSTONE-IP-MIB::rsIpRouteStaticStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2773.2.12.1.3.2.1.7.1
snmpget -v2c -c public <target> REDSTONE-IP-MIB::rsIpRouteStaticStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rsIpRouteStaticStatus.1

Start monitoring Redstone Communications routers (IP interface/address/ARP-timeout configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDSTONE-IP-MIB::rsIpRouteStaticStatus OID value, configure state conditions and alerts, and monitor any Redstone Communications routers (IP interface/address/ARP-timeout configuration) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2773redstoneREDSTONE-SMI
1.3.6.1.4.1.2773.2rsMgmtREDSTONE-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2773.2.12rsIpMIBREDSTONE-IP-MIB
1.3.6.1.4.1.2773.2.12.1rsIpObjectsREDSTONE-IP-MIB
1.3.6.1.4.1.2773.2.12.1.3rsIpRouteREDSTONE-IP-MIB
1.3.6.1.4.1.2773.2.12.1.3.2rsIpRouteStaticTableREDSTONE-IP-MIB
1.3.6.1.4.1.2773.2.12.1.3.2.1rsIpRouteStaticEntryREDSTONE-IP-MIB
1.3.6.1.4.1.2773.2.12.1.3.2.1.7rsIpRouteStaticStatusREDSTONE-IP-MIB