All MIBs › REDSTONE-DS3-MIB › rsDsx3LineType
rsDsx3LineType
Module: REDSTONE-DS3-MIB
OID (symbolic): REDSTONE-DS3-MIB::rsDsx3LineType
OID (numeric): 1.3.6.1.4.1.2773.2.4.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. Note that this object represents the actual line type when the corresponding value of dsx3LineType is dsx3other(1).
The values, in sequence, describe:
TITLE: SPECIFICATION: dsx3M23 ANSI T1.107-1988 dsx3SYNTRAN ANSI T1.107-1988 dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987 e3G832 ITU-T G.832 e3Framed ITU-T G.751 e3Plcp ETSI T/NA(91)18. dsx3M23Plcp ATM Forum af-phy-0054.000 dsx3CbitParityPlcp ATM Forum af-phy-0054.000
What is rsDsx3LineType?
This read-write enumerated value specifies which DS3 or E3 application variant the interface is running, such as M23, SYNTRAN, C-bit parity, clear channel, or one of several E3 framing formats, which in turn determines how the device interprets usage and error statistics. Engineers set it to match what's actually provisioned on the circuit, since DS3 runs at 44.736 Mbps while E3 runs at 34.368 Mbps and each framing type parses the bit stream differently. Configuring this to rsDsx3CbitParity(4) tells the interface to expect C-bit parity framing on what is otherwise a 44.736 Mbps DS3 circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2773.2.4.1.1.1.2 snmpwalk -v2c -c public <target> REDSTONE-DS3-MIB::rsDsx3LineType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2773.2.4.1.1.1.2.1 snmpget -v2c -c public <target> REDSTONE-DS3-MIB::rsDsx3LineType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2773.2.4.1.1.1.2.1 i <value>
Start monitoring Redstone Communications router, DS3/T3 WAN interface (line configuration/alarm reporting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDSTONE-DS3-MIB::rsDsx3LineType OID value, configure state conditions and alerts, and monitor any Redstone Communications router, DS3/T3 WAN interface (line configuration/alarm reporting) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2773 | redstone | REDSTONE-SMI |
| 1.3.6.1.4.1.2773.2 | rsMgmt | REDSTONE-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2773.2.4 | rsDs3MIB | REDSTONE-DS3-MIB |
| 1.3.6.1.4.1.2773.2.4.1 | rsDs3Objects | REDSTONE-DS3-MIB |
| 1.3.6.1.4.1.2773.2.4.1.1 | rsDsx3ConfigTable | REDSTONE-DS3-MIB |
| 1.3.6.1.4.1.2773.2.4.1.1.1 | rsDsx3ConfigEntry | REDSTONE-DS3-MIB |
| 1.3.6.1.4.1.2773.2.4.1.1.1.2 | rsDsx3LineType | REDSTONE-DS3-MIB |