All MIBs › REDLINE-E1T1-MIB › e1t1SyncOn

e1t1SyncOn

OID (symbolic): REDLINE-E1T1-MIB::e1t1SyncOn

OID (numeric): 1.3.6.1.4.1.10728.2.52.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The number of serial interface to be used as clocking reference. For AN-50 the number of serial interfaces is 4

What is e1t1SyncOn?

Set this to the number (0-16) of the serial interface that should be used as the clocking reference for this module; an AN-50 unit supports up to 4 serial interfaces.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10728.2.52.1.4
snmpwalk -v2c -c public <target> REDLINE-E1T1-MIB::e1t1SyncOn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.10728.2.52.1.4.1
snmpget -v2c -c public <target> REDLINE-E1T1-MIB::e1t1SyncOn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.10728.2.52.1.4.1 i <value>

Start monitoring Redline Communications wireless broadband equipment, E1/T1 TDM backhaul module (clocking/VLAN/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDLINE-E1T1-MIB::e1t1SyncOn OID value, configure state conditions and alerts, and monitor any Redline Communications wireless broadband equipment, E1/T1 TDM backhaul module (clocking/VLAN/status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.10728	redline	REDLINE-AN50-PMP-V1-MIB
1.3.6.1.4.1.10728.2	redlineMgmt	REDLINE-AN50-PMP-V1-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.10728.2.52	redlineE1T1	REDLINE-E1T1-MIB
1.3.6.1.4.1.10728.2.52.1	e1t1General	REDLINE-E1T1-MIB
1.3.6.1.4.1.10728.2.52.1.4	e1t1SyncOn	REDLINE-E1T1-MIB

REDLINE-E1T1-MIB :: e1t1SyncOn

e1t1SyncOn

Module

This MIB depends on