All MIBs › REDLINE-E1T1-MIB › e1t1SerialLBO
e1t1SerialLBO
Module: REDLINE-E1T1-MIB
OID (symbolic): REDLINE-E1T1-MIB::e1t1SerialLBO
OID (numeric): 1.3.6.1.4.1.10728.2.52.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Serial LBO.
What is e1t1SerialLBO?
Set this to select the line build-out (LBO) setting — the signal attenuation applied for the cable run length — used on this serial (E1/T1) interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10728.2.52.2.1.4 snmpwalk -v2c -c public <target> REDLINE-E1T1-MIB::e1t1SerialLBO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10728.2.52.2.1.4.1 snmpget -v2c -c public <target> REDLINE-E1T1-MIB::e1t1SerialLBO.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10728.2.52.2.1.4.1 i <value>
Start monitoring Redline Communications wireless broadband equipment, E1/T1 TDM backhaul module (clocking/VLAN/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDLINE-E1T1-MIB::e1t1SerialLBO OID value, configure state conditions and alerts, and monitor any Redline Communications wireless broadband equipment, E1/T1 TDM backhaul module (clocking/VLAN/status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10728 | redline | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2 | redlineMgmt | REDLINE-AN50-PMP-V1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10728.2.52 | redlineE1T1 | REDLINE-E1T1-MIB |
| 1.3.6.1.4.1.10728.2.52.2 | e1t1SerialTable | REDLINE-E1T1-MIB |
| 1.3.6.1.4.1.10728.2.52.2.1 | e1t1SerialEntry | REDLINE-E1T1-MIB |
| 1.3.6.1.4.1.10728.2.52.2.1.4 | e1t1SerialLBO | REDLINE-E1T1-MIB |