All MIBs › RBN-SYS-SECURITY-MIB › rbnMeasurementInterval
rbnMeasurementInterval
Module: RBN-SYS-SECURITY-MIB
OID (symbolic): RBN-SYS-SECURITY-MIB::rbnMeasurementInterval
OID (numeric): 1.3.6.1.4.1.2352.5.54.1.1.2
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-write
Description: Data is sampled at the start and end of a specified interval. The difference between the start and end values |end - start| is called the delta value. When setting the interval, care should be taken that the interval should be short enough that the sampled variable is very unlikely to increase or decrease by more than range of the variable.
What is rbnMeasurementInterval?
This Gauge32 value, in seconds, defines the sampling window used to compute the delta value of the malicious-packets counter, sampled at the start and end of each interval. An admin should keep this interval short enough that the counter is unlikely to change by more than its full range within one window, so bursts of attack traffic are not missed between samples. For example, the 60-second default interval samples the counter once a minute for threshold comparisons.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2352.5.54.1.1.2 snmpwalk -v2c -c public <target> RBN-SYS-SECURITY-MIB::rbnMeasurementInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2352.5.54.1.1.2.1 snmpget -v2c -c public <target> RBN-SYS-SECURITY-MIB::rbnMeasurementInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2352.5.54.1.1.2.1 i <value>
Start monitoring Ericsson (Redback) SmartEdge BRAS/edge router (malicious-packet/security threshold alarms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RBN-SYS-SECURITY-MIB::rbnMeasurementInterval OID value, configure state conditions and alerts, and monitor any Ericsson (Redback) SmartEdge BRAS/edge router (malicious-packet/security threshold alarms) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2352 | redBackNetworks | RBN-SMI |
| 1.3.6.1.4.1.2352.5 | rbnModules | RBN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2352.5.54 | rbnSysSecurityMib | RBN-SYS-SECURITY-MIB |
| 1.3.6.1.4.1.2352.5.54.1 | rbnSysSecObjects | RBN-SYS-SECURITY-MIB |
| 1.3.6.1.4.1.2352.5.54.1.1 | rbnSysSecThresholdObjects | RBN-SYS-SECURITY-MIB |
| 1.3.6.1.4.1.2352.5.54.1.1.2 | rbnMeasurementInterval | RBN-SYS-SECURITY-MIB |