All MIBs › RBN-APS-MIB › apsCommandSwitch
apsCommandSwitch
Module: RBN-APS-MIB
OID (symbolic): RBN-APS-MIB::apsCommandSwitch
OID (numeric): 1.3.6.1.4.1.2352.2.5.1.2.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This field accepts an Integer32 value containing a 16 bit switch command in the low order word and a channel number in lowest four bits of the high order word.
The Switch command values are:
Clear(0)
Clears all of the switch commands listed below for the specified channel.
Lockout of Protection(1)
Prevents any of the working channels from switching to the protection line.
Forced Switch of Working (to Protection)(2)
Switches the specified working channel to the protection line.
Forced Switch of Protection (to Working)(3)
Switches the working channel back from the protection line to the working line.
Manual Switch of Working (to Protection)(4)
Switches the specified working channel to the protection line.
Manual Switch of Protection (to Working)(5)
Switches the working channel back from the protection line to the working line.
Exercise(6)
Exercises the protocol for a protection switch of the specified channel by issuing an Exercise request for that channel and checking the response on the APS channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2352.2.5.1.2.1.1 snmpwalk -v2c -c public <target> RBN-APS-MIB::apsCommandSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2352.2.5.1.2.1.1.1 snmpget -v2c -c public <target> RBN-APS-MIB::apsCommandSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2352.2.5.1.2.1.1.1 i <value>
Start monitoring Redback (Ericsson) SmartEdge router with SONET/SDH interfaces (linear APS protection switching) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RBN-APS-MIB::apsCommandSwitch OID value, configure state conditions and alerts, and monitor any Redback (Ericsson) SmartEdge router with SONET/SDH interfaces (linear APS protection switching) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2352 | redBackNetworks | RBN-SMI |
| 1.3.6.1.4.1.2352.2 | rbnMgmt | RBN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2352.2.5 | rbnApsMIB | RBN-APS-MIB |
| 1.3.6.1.4.1.2352.2.5.1 | rbnApsMIBObjects | RBN-APS-MIB |
| 1.3.6.1.4.1.2352.2.5.1.2 | apsCommandTable | RBN-APS-MIB |
| 1.3.6.1.4.1.2352.2.5.1.2.1 | apsCommandEntry | RBN-APS-MIB |
| 1.3.6.1.4.1.2352.2.5.1.2.1.1 | apsCommandSwitch | RBN-APS-MIB |