All MIBs › RARITAN-PX2-PDU2-MIB › transferSwitchSensorStateChangeDelay
transferSwitchSensorStateChangeDelay
Module: RARITAN-PX2-PDU2-MIB
OID (symbolic): RARITAN-PX2-PDU2-MIB::transferSwitchSensorStateChangeDelay
OID (numeric): 1.3.6.1.4.1.13742.6.3.9.4.1.14
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description:
The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutive samples before the corresponding assertion event is reported. This parameter does not apply to sensors without numerical reading, e.g. operational state or switch fault sensors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13742.6.3.9.4.1.14 snmpwalk -v2c -c public <target> RARITAN-PX2-PDU2-MIB::transferSwitchSensorStateChangeDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13742.6.3.9.4.1.14.1 snmpget -v2c -c public <target> RARITAN-PX2-PDU2-MIB::transferSwitchSensorStateChangeDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13742.6.3.9.4.1.14.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.13742 | raritan | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6 | pdu2 | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3 | configuration | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.9 | transferSwitch | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.9.4 | transferSwitchSensorConfigurationTable | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.9.4.1 | transferSwitchSensorConfigurationEntry | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.9.4.1.14 | transferSwitchSensorStateChangeDelay | RARITAN-PX2-PDU2-MIB |