All MIBs › RARITAN-PX2-PDU2-MIB › externalSensorTypeDefaultStateChangeDelay
externalSensorTypeDefaultStateChangeDelay
Module: RARITAN-PX2-PDU2-MIB
OID (symbolic): RARITAN-PX2-PDU2-MIB::externalSensorTypeDefaultStateChangeDelay
OID (numeric): 1.3.6.1.4.1.13742.6.3.6.4.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description:
The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutive samples before the corresponding assertion event is reported. At present, this value cannot be written (set)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13742.6.3.6.4.1.4 snmpwalk -v2c -c public <target> RARITAN-PX2-PDU2-MIB::externalSensorTypeDefaultStateChangeDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13742.6.3.6.4.1.4.1 snmpget -v2c -c public <target> RARITAN-PX2-PDU2-MIB::externalSensorTypeDefaultStateChangeDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13742.6.3.6.4.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.13742 | raritan | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6 | pdu2 | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3 | configuration | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.6 | externalSensors | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.6.4 | externalSensorTypeDefaultThresholdsTable | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.6.4.1 | externalSensorTypeDefaultThresholdsEntry | RARITAN-PX2-PDU2-MIB |
| 1.3.6.1.4.1.13742.6.3.6.4.1.4 | externalSensorTypeDefaultStateChangeDelay | RARITAN-PX2-PDU2-MIB |