All MIBs › RAPID-CITY-VSP
Organization: Bay Networks, Rapid-City Group
Last Updated: 1997-01-01
Description: Bay Networks Rapid-City enterprise MIB covering switching, routing, MPLS, VRRP, and multicast features on Nortel/Bay Accelar/ERS chassis platforms
5,379 OIDs total — showing 3,042-5,379 (page 2 of 2)
« Prev Page 2 of 2
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| I32 rcSlppEtherType | 1.3.6.1.4.1.2272.1.64.1.1.1.3 | Integer32 | read-write | SLPP Protocol Identification. The value is normally in Hex. |
| rcSlppVlanTable | 1.3.6.1.4.1.2272.1.64.1.1.2 | not-accessible | Table of VLANs for which simple loop detection occur on. | |
| rcSlppVlanEntry | 1.3.6.1.4.1.2272.1.64.1.1.2.1 | not-accessible | SLPP VLAN entry. | |
| RCV rcSlppVlanVlanId | 1.3.6.1.4.1.2272.1.64.1.1.2.1.1 | RcVlanIdOrNone | not-accessible | Vlan id for which simple loop detection occurs on. |
| T/F rcSlppVlanSlppEnable | 1.3.6.1.4.1.2272.1.64.1.1.2.1.2 | TruthValue | read-write | Flag to indicate whether the VLAN entry is active or not for SLPP. |
| ROW rcSlppVlanRowStatus | 1.3.6.1.4.1.2272.1.64.1.1.2.1.3 | RowStatus | read-write | Used to create/delete entries. |
| rcSlppPortTable | 1.3.6.1.4.1.2272.1.64.1.1.3 | not-accessible | Table of ports for which simple loop detection occurs on. | |
| rcSlppPortEntry | 1.3.6.1.4.1.2272.1.64.1.1.3.1 | not-accessible | SLPP Port entry. | |
| NUM rcSlppPortIfIndex | 1.3.6.1.4.1.2272.1.64.1.1.3.1.1 | InterfaceIndex | not-accessible | Port on which simple loop detection occurs on. |
| I32 rcSlppPortPktRxThreshold | 1.3.6.1.4.1.2272.1.64.1.1.3.1.2 | Integer32 | read-write | Once the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown. |
| T/F rcSlppPortSlppEnable | 1.3.6.1.4.1.2272.1.64.1.1.3.1.3 | TruthValue | read-write | Flag to indicate whether the port entry is active or not for SLPP. |
| RCV rcSlppPortIncomingVlanId | 1.3.6.1.4.1.2272.1.64.1.1.3.1.5 | RcVlanIdOrNone | read-only | Vlan id of the classified packet on the port brought down by SLPP. |
| INT rcSlppPortSrcNodeType | 1.3.6.1.4.1.2272.1.64.1.1.3.1.6 | INTEGER | read-only | The src node type of the received slpp Pkt. |
| I32 rcSlppPortPktRxCount | 1.3.6.1.4.1.2272.1.64.1.1.3.1.7 | Integer32 | read-only | Total number of SLPP packets received on the port. |
| U32 rcSlppPortTimeToClrPktRxCount | 1.3.6.1.4.1.2272.1.64.1.1.3.1.12 | Unsigned32 | read-write | Time to clear the SLPP Rx PDU counter. This has a default value of 21600 seconds. Once SLPP is enabled and port starts receiving SLPP PDUs, a timer is started and once the timer exceeds this configured value, rcSlppPortPktRxCount is reset to zero. |
| U32 rcSlppPortRemainingTimeToClrPktRxCount | 1.3.6.1.4.1.2272.1.64.1.1.3.1.13 | Unsigned32 | read-only | Remaining time to clear the SLPP Rx PDU counter. It is calculated using rcSlppPortTimeToClrPktRxCount and has a granularity of 5 seconds. |
| T/F rcSlppPortClearPktRxCount | 1.3.6.1.4.1.2272.1.64.1.1.3.1.14 | TruthValue | read-write | Clear the SLPP Rx PDU counter. |
| rcSlppNotificationObjects | 1.3.6.1.4.1.2272.1.64.1.2 | |||
| RCV rcSlppIncomingVlanId | 1.3.6.1.4.1.2272.1.64.1.2.1 | RcVlanIdOrNone | accessible-for-notify | Vlan id of the classified packet on the port brought down by SLPP. |
| MAC rcSlppSrcMacAddress | 1.3.6.1.4.1.2272.1.64.1.2.2 | MacAddress | accessible-for-notify | Source MAC address in the classified packet on the port brought down by SLPP. |
| NUM rcSlppRxPortIndex | 1.3.6.1.4.1.2272.1.64.1.2.3 | InterfaceIndex | accessible-for-notify | Port on which the SLPP packet is received. |
| RCV rcSlppRxVlanId | 1.3.6.1.4.1.2272.1.64.1.2.4 | RcVlanIdOrNone | accessible-for-notify | Vlan on which the SLPP packet is received. |
| rcTacacs | 1.3.6.1.4.1.2272.1.65 | |||
| rcTacacsGlobal | 1.3.6.1.4.1.2272.1.65.1 | |||
| T/F rcTacacsGlobalEnable | 1.3.6.1.4.1.2272.1.65.1.1 | TruthValue | read-write | Enable/disable this feature. |
| OCT rcTacacsGlobalLastUserName | 1.3.6.1.4.1.2272.1.65.1.2 | OCTET STRING | read-only | The last user for which authentication was attempted using TACACS+. |
| IPt rcTacacsGlobalLastAddressType | 1.3.6.1.4.1.2272.1.65.1.3 | InetAddressType | read-only | The type of address for the TACACS+ server that was most recently accessed |
| IP rcTacacsGlobalLastAddress | 1.3.6.1.4.1.2272.1.65.1.4 | InetAddress | read-only | The address of the TACACS+ server that was most recently accessed |
| BIT rcTacacsAccounting | 1.3.6.1.4.1.2272.1.65.1.5 | Bits | read-write | Determines which application will be accounted by tacacs+. |
| BIT rcTacacsAuthentication | 1.3.6.1.4.1.2272.1.65.1.6 | Bits | read-write | Determines which application will be authenticated by tacacs+. |
| rcTacacsServerTable | 1.3.6.1.4.1.2272.1.65.2 | not-accessible | The (conceptual) table listing the TACACS+ servers with which the client shares a secret. | |
| rcTacacsServerEntry | 1.3.6.1.4.1.2272.1.65.2.1 | not-accessible | An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. | |
| IPt rcTacacsServerAddressType | 1.3.6.1.4.1.2272.1.65.2.1.1 | InetAddressType | not-accessible | Specifies the type of IP address used on the Tacacs+ server. |
| IP rcTacacsServerAddress | 1.3.6.1.4.1.2272.1.65.2.1.2 | InetAddress | not-accessible | The IP address of the TACACS+ server referred to in this table entry. |
| INE rcTacacsServerPortNumber | 1.3.6.1.4.1.2272.1.65.2.1.3 | InetPortNumber | read-create | The TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. |
| INT rcTacacsServerConnectionType | 1.3.6.1.4.1.2272.1.65.2.1.4 | INTEGER | read-create | Specifies TCP connection type between device and TACACS+ server. Either a single open connection between a device and server (SingleConnection), or open/close connection per communication session (PerSessionConnection). |
| INT rcTacacsServerConnectionStatus | 1.3.6.1.4.1.2272.1.65.2.1.5 | INTEGER | read-only | Specifies status TCP connection type between device and TACACS+ server. |
| I32 rcTacacsServerTimeout | 1.3.6.1.4.1.2272.1.65.2.1.6 | Integer32 | read-create | The maximum time (in seconds) to wait for this TACACS+ server to reply. |
| OCT rcTacacsServerKey | 1.3.6.1.4.1.2272.1.65.2.1.7 | OCTET STRING | read-create | Secret key to be shared with this TACACS+ server. If the key length is zero that indicates no encryption is being used. |
| T/F rcTacacsServerSourceIpInterfaceEnabled | 1.3.6.1.4.1.2272.1.65.2.1.8 | TruthValue | read-create | Specifies whether source address specification is enabled. |
| IPt rcTacacsServerSourceIpInterfaceType | 1.3.6.1.4.1.2272.1.65.2.1.9 | InetAddressType | read-create | Specifies the type of IP address used on the interface that connects to the Tacacs+ server. If this value is unknown(0), then a system-wide default value will be used. |
| IP rcTacacsServerSourceIpInterface | 1.3.6.1.4.1.2272.1.65.2.1.10 | InetAddress | read-create | IP address of the interface to use with this server. |
| I32 rcTacacsServerPriority | 1.3.6.1.4.1.2272.1.65.2.1.11 | Integer32 | read-create | Determines the order in which the TACACS+ servers will be used, when 1 is the highest priority. If more than one server share the same priority - they will be used in lexicographic order (the order of entries in this table). |
| ROW rcTacacsServerRowStatus | 1.3.6.1.4.1.2272.1.65.2.1.12 | RowStatus | read-create | The row status variable, can be set to destroy or createAndGo. |
| rcIpfix | 1.3.6.1.4.1.2272.1.66 | |||
| rcIpfixMib | 1.3.6.1.4.1.2272.1.66.1 | |||
| rcIpfixConfGlobal | 1.3.6.1.4.1.2272.1.66.1.1 | |||
| ENA rcIpfixConfState | 1.3.6.1.4.1.2272.1.66.1.1.1 | EnableValue | read-write | Enables/Disables the state of ipfix on the box. |
| rcIpfixTable | 1.3.6.1.4.1.2272.1.66.1.2 | |||
| rcIpfixConfSlotTable | 1.3.6.1.4.1.2272.1.66.1.2.1 | not-accessible | A table to store the configuration details for IPFIX for each slot. This table is indexed by slot number. | |
| rcIpfixConfSlotEntry | 1.3.6.1.4.1.2272.1.66.1.2.1.1 | not-accessible | One Entry holding IPFIX config information on slot basis. | |
| I32 rcIpfixConfSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.1.1.1 | Integer32 | not-accessible | Slot number |
| I32 rcIpfixConfSlotAgingIntv | 1.3.6.1.4.1.2272.1.66.1.2.1.1.2 | Integer32 | read-write | Flow record aging interval (Value in seconds). |
| I32 rcIpfixConfSlotActiveTimeout | 1.3.6.1.4.1.2272.1.66.1.2.1.1.3 | Integer32 | read-write | Flow record active timeout value (Value in mins). |
| I32 rcIpfixConfSlotExportIntv | 1.3.6.1.4.1.2272.1.66.1.2.1.1.4 | Integer32 | read-write | Frequency of flow export to collector (Value in sec). |
| ENA rcIpfixConfSlotExportState | 1.3.6.1.4.1.2272.1.66.1.2.1.1.5 | EnableValue | read-write | State of exporter. |
| I32 rcIpfixConfSlotTempRefIntvSec | 1.3.6.1.4.1.2272.1.66.1.2.1.1.6 | Integer32 | read-write | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| I32 rcIpfixConfSlotTempRefIntvPkts | 1.3.6.1.4.1.2272.1.66.1.2.1.1.7 | Integer32 | read-write | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| rcIpfixCollectorTable | 1.3.6.1.4.1.2272.1.66.1.2.2 | not-accessible | Table to store the configuration details for IPFIX collector for each slot. This table is indexed by slot number and ip address. | |
| rcIpfixCollectorEntry | 1.3.6.1.4.1.2272.1.66.1.2.2.1 | not-accessible | One entry holds IPFIX collector config information based on slot info and collector ip address. | |
| I32 rcIpfixCollectorSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.2.1.1 | Integer32 | not-accessible | Slot number. An index to the CollectorEntry. |
| IPt rcIpfixCollectorAddressType | 1.3.6.1.4.1.2272.1.66.1.2.2.1.2 | InetAddressType | not-accessible | IP address type of the collector. An index to the CollectorEntry. |
| IP rcIpfixCollectorAddress | 1.3.6.1.4.1.2272.1.66.1.2.2.1.3 | InetAddress | not-accessible | IP address of the collector. An index to the CollectorEntry. |
| INT rcIpfixCollectorProtocol | 1.3.6.1.4.1.2272.1.66.1.2.2.1.4 | INTEGER | read-create | Protocol for export data from exporter to collector . |
| INE rcIpfixCollectorDestPort | 1.3.6.1.4.1.2272.1.66.1.2.2.1.5 | InetPortNumber | read-create | Dest port to send the requests. |
| IPt rcIpfixCollectorExporterIpType | 1.3.6.1.4.1.2272.1.66.1.2.2.1.6 | InetAddressType | read-create | Ip address type of the exporter for collector. |
| IP rcIpfixCollectorExporterIp | 1.3.6.1.4.1.2272.1.66.1.2.2.1.7 | InetAddress | read-create | Ip address of the exporter for collector. |
| INT rcIpfixCollectorProtoVer | 1.3.6.1.4.1.2272.1.66.1.2.2.1.8 | INTEGER | read-create | This specifies the protocol version for ipfix. |
| T/F rcIpfixCollectorState | 1.3.6.1.4.1.2272.1.66.1.2.2.1.9 | TruthValue | read-create | State of the particular collector. Enable is true by default. |
| ROW rcIpfixCollectorRowStatus | 1.3.6.1.4.1.2272.1.66.1.2.2.1.10 | RowStatus | read-create | Used to create/delete entries. |
| rcIpfixConfPortTable | 1.3.6.1.4.1.2272.1.66.1.2.3 | not-accessible | A table to store the configuration details for IPFIX for each port. This table is indexed by port number. | |
| rcIpfixConfPortEntry | 1.3.6.1.4.1.2272.1.66.1.2.3.1 | not-accessible | Entry holding IPFIX config information per port. | |
| NUM rcIpfixConfPortId | 1.3.6.1.4.1.2272.1.66.1.2.3.1.1 | InterfaceIndex | not-accessible | An index to the IpfixConfPortEntry, a unique identifier of the portId |
| I32 rcIpfixConfPortSampleRate | 1.3.6.1.4.1.2272.1.66.1.2.3.1.2 | Integer32 | read-write | Used to configure the sampling rate. Sample one in every N packets. |
| I32 rcIpfixConfPortHashPolyCoeffs | 1.3.6.1.4.1.2272.1.66.1.2.3.1.3 | Integer32 | read-write | Command to set hash polynomial coeffs. |
| I32 rcIpfixConfPortHashPolySeed | 1.3.6.1.4.1.2272.1.66.1.2.3.1.4 | Integer32 | read-write | Command to set hash polynomial seed. |
| INT rcIpfixConfPortFlush | 1.3.6.1.4.1.2272.1.66.1.2.3.1.5 | INTEGER | read-write | This is used to delete all records stored in COP, or to initiate an export of all records and delete data base after the export is finished. |
| ENA rcIpfixConfPortAllTraffic | 1.3.6.1.4.1.2272.1.66.1.2.3.1.6 | EnableValue | read-write | This is used to enable/disable ipfix on all trafiic, for the specified port. |
| INT rcIpfixConfPortHashKeyId | 1.3.6.1.4.1.2272.1.66.1.2.3.1.7 | INTEGER | read-write | hash key id. |
| I32 rcIpfixConfPortDynamicSampRate | 1.3.6.1.4.1.2272.1.66.1.2.3.1.8 | Integer32 | read-only | Indicates the dynamic sampling rate. |
| rcIpfixHashStatsTable | 1.3.6.1.4.1.2272.1.66.1.2.4 | not-accessible | A table of hash Statistics entries to store the statistics for each slot. This table is indexed by the slot number. | |
| rcIpfixHashStatsEntry | 1.3.6.1.4.1.2272.1.66.1.2.4.1 | not-accessible | Entry containing hash statistics information for a particular slot. | |
| I32 rcIpfixHashStatsSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.4.1.1 | Integer32 | not-accessible | A unique identifier for the table. |
| C64 rcIpfixHashStatsHashOverflows | 1.3.6.1.4.1.2272.1.66.1.2.4.1.2 | Counter64 | read-only | Count of hash overflows per slot. |
| C64 rcIpfixHashStatsHashDrops | 1.3.6.1.4.1.2272.1.66.1.2.4.1.3 | Counter64 | read-only | Count of hash drops per slot. |
| INT rcIpfixHashStatsClear | 1.3.6.1.4.1.2272.1.66.1.2.4.1.4 | INTEGER | read-write | Setting this object will clear hash statistics for a slot. |
| TIM rcIpfixHashStatsClearTime | 1.3.6.1.4.1.2272.1.66.1.2.4.1.5 | TimeStamp | read-only | The value of sysUpTime when the hash statistics were last cleared. |
| rcIpfixExporterStatsTable | 1.3.6.1.4.1.2272.1.66.1.2.5 | not-accessible | A table of Exporter Statistics entries to store the statistics for each slot, each collector. This table is indexed by the slot number and collector address. | |
| rcIpfixExporterStatsEntry | 1.3.6.1.4.1.2272.1.66.1.2.5.1 | not-accessible | Entry containing Exporter statistics information for a particular slot and particular collector. | |
| I32 rcIpfixExporterStatsSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.5.1.1 | Integer32 | not-accessible | Index for the table, slot number. |
| IPt rcIpfixExporterStatsCollectorType | 1.3.6.1.4.1.2272.1.66.1.2.5.1.2 | InetAddressType | not-accessible | Collector IP address type. This is an index for the table. |
| IP rcIpfixExporterStatsCollector | 1.3.6.1.4.1.2272.1.66.1.2.5.1.3 | InetAddress | not-accessible | Index for the table, collector address. |
| C64 rcIpfixExporterStatsOutPkts | 1.3.6.1.4.1.2272.1.66.1.2.5.1.4 | Counter64 | read-only | Number of Packets sent. |
| C64 rcIpfixExporterStatsOutOctets | 1.3.6.1.4.1.2272.1.66.1.2.5.1.5 | Counter64 | read-only | Number of Bytes sent. |
| C64 rcIpfixExporterStatsPktsLoss | 1.3.6.1.4.1.2272.1.66.1.2.5.1.6 | Counter64 | read-only | Number of Records lost. |
| INT rcIpfixExporterStatsClear | 1.3.6.1.4.1.2272.1.66.1.2.5.1.7 | INTEGER | read-write | Setting this object will clear exporter statistics. |
| TIM rcIpfixExporterStatsClearTime | 1.3.6.1.4.1.2272.1.66.1.2.5.1.8 | TimeStamp | read-only | The value of sysUpTime when exporter statistics were last cleared. |
| rcOspfv3 | 1.3.6.1.4.1.2272.1.67 | |||
| rcOspfv3Mib | 1.3.6.1.4.1.2272.1.67.1 | |||
| rcOspfv3Objects | 1.3.6.1.4.1.2272.1.67.1.1 | |||
| rcOspfv3GeneralGroup | 1.3.6.1.4.1.2272.1.67.1.1.1 | |||
| IP rcOspfv3RouterId | 1.3.6.1.4.1.2272.1.67.1.1.1.1 | IpAddress | read-write | A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 interface addresses if IPv4 is configured on the router. |
| INT rcOspfv3AdminStat | 1.3.6.1.4.1.2272.1.67.1.1.1.2 | INTEGER | read-write | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disables it on all inter- faces. |
| INT rcOspfv3VersionNumber | 1.3.6.1.4.1.2272.1.67.1.1.1.3 | INTEGER | read-only | The version number of OSPF for IPv6 is 3. |
| T/F rcOspfv3AreaBdrRtrStatus | 1.3.6.1.4.1.2272.1.67.1.1.1.4 | TruthValue | read-only | A flag to note whether this router is an area border router. |
| T/F rcOspfv3ASBdrRtrStatus | 1.3.6.1.4.1.2272.1.67.1.1.1.5 | TruthValue | read-write | A flag to note whether this router is config- ured as an Autonomous System border router. |
| G32 rcOspfv3AsScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.1.6 | Gauge32 | read-only | The number of AS-Scope (e.g. AS-External) link-state advertisements in the link-state database. |
| I32 rcOspfv3AsScopeLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.1.7 | Integer32 | read-only | The 32-bit unsigned sum of the LS checksums of the AS-scoped link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| C32 rcOspfv3OriginateNewLsas | 1.3.6.1.4.1.2272.1.67.1.1.1.8 | Counter32 | read-only | The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA. |
| C32 rcOspfv3RxNewLsas | 1.3.6.1.4.1.2272.1.67.1.1.1.9 | Counter32 | read-only | The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments. |
| G32 rcOspfv3ExtLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.1.10 | Gauge32 | read-only | The number of External(LS type 0x4005) in the link- state database |
| I32 rcOspfv3ExtAreaLsdbLimit | 1.3.6.1.4.1.2272.1.67.1.1.1.11 | Integer32 | read-write | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches rcOspfv3ExtAreaLsdbLimit, the router enters Overflow- State. The router never holds more than rcOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. OspfExtAreaLsdbLimit MUST be set identically in all routers attached to the OSPFv3 backbone and/or any regular OSPFv3 area. (i.e., OSPFv3 stub areas and NSSAs are excluded). |
| BIT rcOspfv3MulticastExtensions | 1.3.6.1.4.1.2272.1.67.1.1.1.12 | Bits | read-write | A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. If intraAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). If interAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams between OSPFv3 areas (called inter-area multicast routing). If interAsMulticast set, indicates that the router can forward IPv6 multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: - All bits cleared (no multicasting) - intraAreaMulticast only, - intraAreaMulticast and interAreaMulticast, - intraAreaMulticast and interAsMulticast - intraAreaMulticast, interAreaMulticast and interAsMulticast By default, all bits are cleared. |
| U32 rcOspfv3ExitOverflowInterval | 1.3.6.1.4.1.2272.1.67.1.1.1.13 | Unsigned32 | read-write | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-External-LSAs. When set to 0, the router will not leave Overflow- State until restarted. |
| T/F rcOspfv3DemandExtensions | 1.3.6.1.4.1.2272.1.67.1.1.1.14 | TruthValue | read-write | The router's support for demand routing. |
| T/F rcOspfv3TrafficEngineeringSupport | 1.3.6.1.4.1.2272.1.67.1.1.1.15 | TruthValue | read-write | The router's support for traffic engineering extensions. |
| U32 rcOspfv3ReferenceBandwidth | 1.3.6.1.4.1.2272.1.67.1.1.1.16 | Unsigned32 | read-write | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) |
| INT rcOspfv3RestartSupport | 1.3.6.1.4.1.2272.1.67.1.1.1.17 | INTEGER | read-write | The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. |
| I32 rcOspfv3RestartInterval | 1.3.6.1.4.1.2272.1.67.1.1.1.18 | Integer32 | read-write | Configured OSPF hitless restart timeout interval. |
| INT rcOspfv3RestartStatus | 1.3.6.1.4.1.2272.1.67.1.1.1.19 | INTEGER | read-only | Current status of OSPF hitless restart. |
| I32 rcOspfv3RestartAge | 1.3.6.1.4.1.2272.1.67.1.1.1.20 | Integer32 | read-only | Remaining time in current OSPF hitless restart interval. |
| INT rcOspfv3RestartExitReason | 1.3.6.1.4.1.2272.1.67.1.1.1.21 | INTEGER | read-only | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway. |
| INT rcOspfv3BadLsaIgnore | 1.3.6.1.4.1.2272.1.67.1.1.1.22 | INTEGER | read-write | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disables it on all inter- faces. |
| rcOspfv3AreaTable | 1.3.6.1.4.1.2272.1.67.1.1.2 | not-accessible | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. | |
| rcOspfv3AreaEntry | 1.3.6.1.4.1.2272.1.67.1.1.2.1 | not-accessible | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. | |
| IP rcOspfv3AreaId | 1.3.6.1.4.1.2272.1.67.1.1.2.1.1 | IpAddress | not-accessible | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| INT rcOspfv3ImportAsExtern | 1.3.6.1.4.1.2272.1.67.1.1.2.1.2 | INTEGER | read-write | Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Type-7 LSAs which have Area-scope |
| C32 rcOspfv3AreaSpfRuns | 1.3.6.1.4.1.2272.1.67.1.1.2.1.3 | Counter32 | read-only | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. |
| G32 rcOspfv3AreaBdrRtrCount | 1.3.6.1.4.1.2272.1.67.1.1.2.1.4 | Gauge32 | read-only | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| G32 rcOspfv3AreaAsBdrRtrCount | 1.3.6.1.4.1.2272.1.67.1.1.2.1.5 | Gauge32 | read-only | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| G32 rcOspfv3AreaScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.2.1.6 | Gauge32 | read-only | The total number of Area-Scope link-state advertisements in this area's link-state database. |
| I32 rcOspfv3AreaScopeLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.2.1.7 | Integer32 | read-only | The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| INT rcOspfv3AreaSummary | 1.3.6.1.4.1.2272.1.67.1.1.2.1.8 | INTEGER | read-write | The variable rcOspfv3AreaSummary controls the im- port of Inter-Area LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate Inter-Area LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate Inter-Area LSAs. |
| ROW rcOspfv3AreaStatus | 1.3.6.1.4.1.2272.1.67.1.1.2.1.9 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| I32 rcOspfv3StubMetric | 1.3.6.1.4.1.2272.1.67.1.1.2.1.10 | Integer32 | read-write | The metric value advertised for the default route into Stub and NSSA areas. |
| INT rcOspfv3AreaNssaTranslatorRole | 1.3.6.1.4.1.2272.1.67.1.1.2.1.11 | INTEGER | read-write | Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs. |
| INT rcOspfv3AreaNssaTranslatorState | 1.3.6.1.4.1.2272.1.67.1.1.2.1.12 | INTEGER | read-only | Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's rcOspfv3AreaNssTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA Border router is NOT translating type-7 LSAs into type-5. |
| U32 rcOspfv3AreaNssaTranslatorStabilityInterval | 1.3.6.1.4.1.2272.1.67.1.1.2.1.13 | Unsigned32 | read-write | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| C32 rcOspfv3AreaNssaTranslatorEvents | 1.3.6.1.4.1.2272.1.67.1.1.2.1.14 | Counter32 | read-only | Indicates the number of Translator State changes that have occurred since the last boot-up. |
| INT rcOspfv3AreaStubMetricType | 1.3.6.1.4.1.2272.1.67.1.1.2.1.15 | INTEGER | read-write | This variable displays the type of metric ad- vertised as a default route. |
| rcOspfv3AsLsdbTable | 1.3.6.1.4.1.2272.1.67.1.1.3 | not-accessible | The OSPFv3 Process's AS-Scope Link State Database. | |
| rcOspfv3AsLsdbEntry | 1.3.6.1.4.1.2272.1.67.1.1.3.1 | not-accessible | A single AS-Scope Link State Advertisement. | |
| INT rcOspfv3AsLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.3.1.1 | INTEGER | not-accessible | The type of the link state advertisement. Each link state type has a separate advertise- ment format. AS-Scope LSAs not recognized by the router may be stored in the database. |
| IP rcOspfv3AsLsdbRouterId | 1.3.6.1.4.1.2272.1.67.1.1.3.1.2 | IpAddress | not-accessible | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rcOspfv3AsLsdbLsid | 1.3.6.1.4.1.2272.1.67.1.1.3.1.3 | Unsigned32 | not-accessible | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. |
| I32 rcOspfv3AsLsdbSequence | 1.3.6.1.4.1.2272.1.67.1.1.3.1.4 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rcOspfv3AsLsdbAge | 1.3.6.1.4.1.2272.1.67.1.1.3.1.5 | Integer32 | read-only | This field is the age of the link state adver- tisement in seconds. |
| I32 rcOspfv3AsLsdbChecksum | 1.3.6.1.4.1.2272.1.67.1.1.3.1.6 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT rcOspfv3AsLsdbAdvertisement | 1.3.6.1.4.1.2272.1.67.1.1.3.1.7 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| T/F rcOspfv3AsLsdbTypeKnown | 1.3.6.1.4.1.2272.1.67.1.1.3.1.8 | TruthValue | read-only | Is the LSA type recognized by this Router? |
| rcOspfv3AreaLsdbTable | 1.3.6.1.4.1.2272.1.67.1.1.4 | not-accessible | The OSPFv3 Process's Area-Scope Link State Database. | |
| rcOspfv3AreaLsdbEntry | 1.3.6.1.4.1.2272.1.67.1.1.4.1 | not-accessible | A single Area-Scope Link State Advertisement. | |
| IP rcOspfv3AreaLsdbAreaId | 1.3.6.1.4.1.2272.1.67.1.1.4.1.1 | IpAddress | not-accessible | The 32 bit identifier of the Area from which the LSA was received. |
| INT rcOspfv3AreaLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.4.1.2 | INTEGER | not-accessible | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Area-Scope LSAs unrecognized by the router are also stored in this database. |
| IP rcOspfv3AreaLsdbRouterId | 1.3.6.1.4.1.2272.1.67.1.1.4.1.3 | IpAddress | not-accessible | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rcOspfv3AreaLsdbLsid | 1.3.6.1.4.1.2272.1.67.1.1.4.1.4 | Unsigned32 | not-accessible | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. |
| I32 rcOspfv3AreaLsdbSequence | 1.3.6.1.4.1.2272.1.67.1.1.4.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rcOspfv3AreaLsdbAge | 1.3.6.1.4.1.2272.1.67.1.1.4.1.6 | Integer32 | read-only | This field is the age of the link state adver- tisement in seconds. |
| I32 rcOspfv3AreaLsdbChecksum | 1.3.6.1.4.1.2272.1.67.1.1.4.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT rcOspfv3AreaLsdbAdvertisement | 1.3.6.1.4.1.2272.1.67.1.1.4.1.8 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| T/F rcOspfv3AreaLsdbTypeKnown | 1.3.6.1.4.1.2272.1.67.1.1.4.1.9 | TruthValue | read-only | Is the LSA type recognized by this Router? |
| rcOspfv3LinkLsdbTable | 1.3.6.1.4.1.2272.1.67.1.1.5 | not-accessible | The OSPFv3 Process's Link-Scope Link State Database. | |
| rcOspfv3LinkLsdbEntry | 1.3.6.1.4.1.2272.1.67.1.1.5.1 | not-accessible | A single Link-Scope Link State Advertisement. | |
| NUM rcOspfv3LinkLsdbIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.5.1.1 | InterfaceIndex | not-accessible | The identifier of the link from which the LSA was received. |
| INT rcOspfv3LinkLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.5.1.2 | INTEGER | not-accessible | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Link-Scope LSAs unrecognized by the router are also stored in this database. |
| IP rcOspfv3LinkLsdbRouterId | 1.3.6.1.4.1.2272.1.67.1.1.5.1.3 | IpAddress | not-accessible | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rcOspfv3LinkLsdbLsid | 1.3.6.1.4.1.2272.1.67.1.1.5.1.4 | Unsigned32 | not-accessible | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. |
| I32 rcOspfv3LinkLsdbSequence | 1.3.6.1.4.1.2272.1.67.1.1.5.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rcOspfv3LinkLsdbAge | 1.3.6.1.4.1.2272.1.67.1.1.5.1.6 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rcOspfv3LinkLsdbChecksum | 1.3.6.1.4.1.2272.1.67.1.1.5.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT rcOspfv3LinkLsdbAdvertisement | 1.3.6.1.4.1.2272.1.67.1.1.5.1.8 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| T/F rcOspfv3LinkLsdbTypeKnown | 1.3.6.1.4.1.2272.1.67.1.1.5.1.9 | TruthValue | read-only | Indicates whether the LSA type is recognized by this Router. |
| rcOspfv3HostTable | 1.3.6.1.4.1.2272.1.67.1.1.6 | not-accessible | The list of Hosts, and their metrics, that the router will advertise as host routes. | |
| rcOspfv3HostEntry | 1.3.6.1.4.1.2272.1.67.1.1.6.1 | not-accessible | A metric to be advertised when a given host is reachable. | |
| INT rcOspfv3HostAddressType | 1.3.6.1.4.1.2272.1.67.1.1.6.1.1 | INTEGER | not-accessible | The address type of rcOspfv3HostAddress. Only IPv6 addresses without zone index are expected. |
| OCT rcOspfv3HostAddress | 1.3.6.1.4.1.2272.1.67.1.1.6.1.2 | OCTET STRING | not-accessible | The IPv6 Address of the Host. Must be a Global or Site-local address. |
| I32 rcOspfv3HostMetric | 1.3.6.1.4.1.2272.1.67.1.1.6.1.3 | Integer32 | read-write | The Metric to be advertised. |
| ROW rcOspfv3HostStatus | 1.3.6.1.4.1.2272.1.67.1.1.6.1.4 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| IP rcOspfv3HostAreaID | 1.3.6.1.4.1.2272.1.67.1.1.6.1.5 | IpAddress | read-write | The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 in- terface is in, or 0.0.0.0 |
| rcOspfv3IfTable | 1.3.6.1.4.1.2272.1.67.1.1.7 | not-accessible | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. | |
| rcOspfv3IfEntry | 1.3.6.1.4.1.2272.1.67.1.1.7.1 | not-accessible | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. | |
| NUM rcOspfv3IfIndex | 1.3.6.1.4.1.2272.1.67.1.1.7.1.1 | InterfaceIndex | not-accessible | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| IP rcOspfv3IfAreaId | 1.3.6.1.4.1.2272.1.67.1.1.7.1.2 | IpAddress | read-write | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| INT rcOspfv3IfType | 1.3.6.1.4.1.2272.1.67.1.1.7.1.3 | INTEGER | read-write | The OSPFv3 interface type. |
| INT rcOspfv3IfAdminStat | 1.3.6.1.4.1.2272.1.67.1.1.7.1.4 | INTEGER | read-write | The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3. |
| I32 rcOspfv3IfRtrPriority | 1.3.6.1.4.1.2272.1.67.1.1.7.1.5 | Integer32 | read-write | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. |
| I32 rcOspfv3IfTransitDelay | 1.3.6.1.4.1.2272.1.67.1.1.7.1.6 | Integer32 | read-write | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| I32 rcOspfv3IfRetransInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.7 | Integer32 | read-write | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. |
| I32 rcOspfv3IfHelloInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.8 | Integer32 | read-write | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. |
| I32 rcOspfv3IfRtrDeadInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.9 | Integer32 | read-write | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. |
| U32 rcOspfv3IfPollInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.10 | Unsigned32 | read-write | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| INT rcOspfv3IfState | 1.3.6.1.4.1.2272.1.67.1.1.7.1.11 | INTEGER | read-only | The OSPFv3 Interface State. |
| IP rcOspfv3IfDesignatedRouter | 1.3.6.1.4.1.2272.1.67.1.1.7.1.12 | IpAddress | read-only | The Router ID of the Designated Router. |
| IP rcOspfv3IfBackupDesignatedRouter | 1.3.6.1.4.1.2272.1.67.1.1.7.1.14 | IpAddress | read-only | The Router ID of the Backup Designated Router. |
| C32 rcOspfv3IfEvents | 1.3.6.1.4.1.2272.1.67.1.1.7.1.15 | Counter32 | read-only | The number of times this OSPF interface has changed its state, or an error has occurred. |
| ROW rcOspfv3IfStatus | 1.3.6.1.4.1.2272.1.67.1.1.7.1.17 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| INT rcOspfv3IfMulticastForwarding | 1.3.6.1.4.1.2272.1.67.1.1.7.1.18 | INTEGER | read-write | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting rcOspfv3MulticastForwarding to 0 effective- ly disables all multicast forwarding. |
| T/F rcOspfv3IfDemand | 1.3.6.1.4.1.2272.1.67.1.1.7.1.19 | TruthValue | read-write | Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on this interface. |
| I32 rcOspfv3IfMetricValue | 1.3.6.1.4.1.2272.1.67.1.1.7.1.20 | Integer32 | read-write | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the rcOspfv3ReferenceBandwidth object. A value of '0' means the metric value of this interface will depend on the speed of the interface, when the state of the interface is up. The default (0) metric for Vlan and Tunnel is 10. |
| G32 rcOspfv3IfLinkScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.7.1.21 | Gauge32 | read-only | The total number of Link-Scope link-state advertisements in this link's link-state database. |
| I32 rcOspfv3IfLinkLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.7.1.22 | Integer32 | read-only | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| I32 rcOspfv3IfInstId | 1.3.6.1.4.1.2272.1.67.1.1.7.1.23 | Integer32 | read-write | Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only. |
| T/F rcOspfv3IfDemandNbrProbe | 1.3.6.1.4.1.2272.1.67.1.1.7.1.24 | TruthValue | read-write | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default. |
| U32 rcOspfv3IfDemandNbrProbeRetxLimit | 1.3.6.1.4.1.2272.1.67.1.1.7.1.25 | Unsigned32 | read-write | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| U32 rcOspfv3IfDemandNbrProbeInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.26 | Unsigned32 | read-write | Defines how often the neighbor will be probed. |
| rcOspfv3VirtIfTable | 1.3.6.1.4.1.2272.1.67.1.1.8 | not-accessible | Information about this router's virtual inter- faces. | |
| rcOspfv3VirtIfEntry | 1.3.6.1.4.1.2272.1.67.1.1.8.1 | not-accessible | Information about a single Virtual Interface. | |
| IP rcOspfv3VirtIfAreaId | 1.3.6.1.4.1.2272.1.67.1.1.8.1.1 | IpAddress | not-accessible | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| IP rcOspfv3VirtIfNeighbor | 1.3.6.1.4.1.2272.1.67.1.1.8.1.2 | IpAddress | not-accessible | The Router ID of the Virtual Neighbor. |
| I32 rcOspfv3VirtIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.8.1.3 | Integer32 | read-only | The interface ID assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs. |
| I32 rcOspfv3VirtIfTransitDelay | 1.3.6.1.4.1.2272.1.67.1.1.8.1.4 | Integer32 | read-write | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| I32 rcOspfv3VirtIfRetransInterval | 1.3.6.1.4.1.2272.1.67.1.1.8.1.5 | Integer32 | read-write | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time. |
| I32 rcOspfv3VirtIfHelloInterval | 1.3.6.1.4.1.2272.1.67.1.1.8.1.6 | Integer32 | read-write | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| I32 rcOspfv3VirtIfRtrDeadInterval | 1.3.6.1.4.1.2272.1.67.1.1.8.1.7 | Integer32 | read-write | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. |
| INT rcOspfv3VirtIfState | 1.3.6.1.4.1.2272.1.67.1.1.8.1.8 | INTEGER | read-only | OSPF virtual interface states. |
| C32 rcOspfv3VirtIfEvents | 1.3.6.1.4.1.2272.1.67.1.1.8.1.9 | Counter32 | read-only | The number of state changes or error events on this Virtual Link |
| ROW rcOspfv3VirtIfStatus | 1.3.6.1.4.1.2272.1.67.1.1.8.1.10 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| G32 rcOspfv3VirtIfLinkScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.8.1.11 | Gauge32 | read-only | The total number of Link-Scope link-state advertisements in this virtual link's link-state database. |
| I32 rcOspfv3VirtIfLinkLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.8.1.12 | Integer32 | read-only | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| rcOspfv3NbrTable | 1.3.6.1.4.1.2272.1.67.1.1.9 | not-accessible | A table of non-virtual neighbor information. | |
| rcOspfv3NbrEntry | 1.3.6.1.4.1.2272.1.67.1.1.9.1 | not-accessible | The information regarding a single neighbor. | |
| NUM rcOspfv3NbrIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.9.1.1 | InterfaceIndex | not-accessible | The local link ID of the link over which the neighbor can be reached. |
| IP rcOspfv3NbrRtrId | 1.3.6.1.4.1.2272.1.67.1.1.9.1.2 | IpAddress | not-accessible | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| INT rcOspfv3NbrAddressType | 1.3.6.1.4.1.2272.1.67.1.1.9.1.3 | INTEGER | read-only | The address type of rcOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| OCT rcOspfv3NbrAddress | 1.3.6.1.4.1.2272.1.67.1.1.9.1.4 | OCTET STRING | read-only | The IPv6 address of the neighbor associated with the local link. |
| I32 rcOspfv3NbrOptions | 1.3.6.1.4.1.2272.1.67.1.1.9.1.5 | Integer32 | read-only | A Bit Mask corresponding to the neighbor's op- tions field. |
| INT rcOspfv3NbrPriority | 1.3.6.1.4.1.2272.1.67.1.1.9.1.6 | INTEGER | read-only | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. |
| INT rcOspfv3NbrState | 1.3.6.1.4.1.2272.1.67.1.1.9.1.7 | INTEGER | read-only | The State of the relationship with this Neigh- bor. |
| C32 rcOspfv3NbrEvents | 1.3.6.1.4.1.2272.1.67.1.1.9.1.8 | Counter32 | read-only | The number of times this neighbor relationship has changed state, or an error has occurred. |
| G32 rcOspfv3NbrLsRetransQLen | 1.3.6.1.4.1.2272.1.67.1.1.9.1.9 | Gauge32 | read-only | The current length of the retransmission queue. |
| T/F rcOspfv3NbrHelloSuppressed | 1.3.6.1.4.1.2272.1.67.1.1.9.1.10 | TruthValue | read-only | Indicates whether Hellos are being suppressed to the neighbor |
| I32 rcOspfv3NbrIfId | 1.3.6.1.4.1.2272.1.67.1.1.9.1.11 | Integer32 | read-only | The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. |
| INT rcOspfv3NbrRestartHelperStatus | 1.3.6.1.4.1.2272.1.67.1.1.9.1.12 | INTEGER | read-only | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| I32 rcOspfv3NbrRestartHelperAge | 1.3.6.1.4.1.2272.1.67.1.1.9.1.13 | Integer32 | read-only | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| INT rcOspfv3NbrRestartHelperExitReason | 1.3.6.1.4.1.2272.1.67.1.1.9.1.14 | INTEGER | read-only | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| I32 rcOspfv3NbrDeadIntCnt | 1.3.6.1.4.1.2272.1.67.1.1.9.1.15 | Integer32 | read-only | This is a Dead interval Count or TTL (time to live) field that indicates how many seconds are left before the Neighbor is declared down. The starting value is set to the Router Dead Interval value and it decrements to 0 if there is no Hello received for that neighbor (then the neighbor is declared down). When a hello is received, the value is reset to the Router Dead Interval value again. |
| rcOspfv3NbmaNbrTable | 1.3.6.1.4.1.2272.1.67.1.1.10 | not-accessible | A table of configured non-virtual neighbor information and neighbors dynamically discovered by lower-level protocols such as Inverse Neighbor Discovery. | |
| rcOspfv3NbmaNbrEntry | 1.3.6.1.4.1.2272.1.67.1.1.10.1 | not-accessible | The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery. | |
| NUM rcOspfv3NbmaNbrIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.10.1.1 | InterfaceIndex | not-accessible | The local link ID of the link over which the neighbor can be reached. |
| ADR rcOspfv3NbmaNbrAddress | 1.3.6.1.4.1.2272.1.67.1.1.10.1.2 | Ipv6Address | not-accessible | The IPv6 address of the neighbor associated with the local link. |
| INT rcOspfv3NbmaNbrPriority | 1.3.6.1.4.1.2272.1.67.1.1.10.1.3 | INTEGER | read-write | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. |
| IP rcOspfv3NbmaNbrRtrId | 1.3.6.1.4.1.2272.1.67.1.1.10.1.4 | IpAddress | read-only | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. A value of 0.0.0.0 is returned until a Hello is received from the configured neighbor. |
| INT rcOspfv3NbmaNbrState | 1.3.6.1.4.1.2272.1.67.1.1.10.1.5 | INTEGER | read-only | The State of the relationship with this Neigh- bor. |
| STO rcOspfv3NbmaNbrStorageType | 1.3.6.1.4.1.2272.1.67.1.1.10.1.6 | StorageType | read-write | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Manually configured entries will have a storage type of nonVolatile while entries dynamically created as a result of a lower-level protocol such as Inverse Neighbor Discovery will have a storage type of volatile. |
| ROW rcOspfv3NbmaNbrStatus | 1.3.6.1.4.1.2272.1.67.1.1.10.1.7 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| rcOspfv3VirtNbrTable | 1.3.6.1.4.1.2272.1.67.1.1.11 | not-accessible | A table of virtual neighbor information. | |
| rcOspfv3VirtNbrEntry | 1.3.6.1.4.1.2272.1.67.1.1.11.1 | not-accessible | Virtual neighbor information. | |
| IP rcOspfv3VirtNbrArea | 1.3.6.1.4.1.2272.1.67.1.1.11.1.1 | IpAddress | not-accessible | The Transit Area Identifier. |
| IP rcOspfv3VirtNbrRtrId | 1.3.6.1.4.1.2272.1.67.1.1.11.1.2 | IpAddress | not-accessible | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| I32 rcOspfv3VirtNbrIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.11.1.3 | Integer32 | read-only | The local interface ID for the virtual link over which the neighbor can be reached. |
| INT rcOspfv3VirtNbrAddressType | 1.3.6.1.4.1.2272.1.67.1.1.11.1.4 | INTEGER | read-only | The address type of rcOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. |
| OCT rcOspfv3VirtNbrAddress | 1.3.6.1.4.1.2272.1.67.1.1.11.1.5 | OCTET STRING | read-only | The IPv6 address advertised by this Virtual Neighbor. It must be a Site-Local or Global scope address. |
| I32 rcOspfv3VirtNbrOptions | 1.3.6.1.4.1.2272.1.67.1.1.11.1.6 | Integer32 | read-only | A Bit Mask corresponding to the neighbor's op- tions field. |
| INT rcOspfv3VirtNbrState | 1.3.6.1.4.1.2272.1.67.1.1.11.1.7 | INTEGER | read-only | The state of the Virtual Neighbor Relation- ship. |
| C32 rcOspfv3VirtNbrEvents | 1.3.6.1.4.1.2272.1.67.1.1.11.1.8 | Counter32 | read-only | The number of times this virtual link has changed its state, or an error has occurred. |
| G32 rcOspfv3VirtNbrLsRetransQLen | 1.3.6.1.4.1.2272.1.67.1.1.11.1.9 | Gauge32 | read-only | The current length of the retransmission queue. |
| T/F rcOspfv3VirtNbrHelloSuppressed | 1.3.6.1.4.1.2272.1.67.1.1.11.1.10 | TruthValue | read-only | Indicates whether Hellos are being suppressed to the neighbor |
| I32 rcOspfv3VirtNbrIfId | 1.3.6.1.4.1.2272.1.67.1.1.11.1.11 | Integer32 | read-only | The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID. |
| INT rcOspfv3VirtNbrRestartHelperStatus | 1.3.6.1.4.1.2272.1.67.1.1.11.1.12 | INTEGER | read-only | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| I32 rcOspfv3VirtNbrRestartHelperAge | 1.3.6.1.4.1.2272.1.67.1.1.11.1.13 | Integer32 | read-only | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| INT rcOspfv3VirtNbrRestartHelperExitReason | 1.3.6.1.4.1.2272.1.67.1.1.11.1.14 | INTEGER | read-only | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| rcOspfv3AreaAggregateTable | 1.3.6.1.4.1.2272.1.67.1.1.12 | not-accessible | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most specific match is the preferred one. | |
| rcOspfv3AreaAggregateEntry | 1.3.6.1.4.1.2272.1.67.1.1.12.1 | not-accessible | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most specific match is the preferred one. | |
| IP rcOspfv3AreaAggregateAreaID | 1.3.6.1.4.1.2272.1.67.1.1.12.1.1 | IpAddress | not-accessible | The Area the Address Aggregate is to be found within. |
| INT rcOspfv3AreaAggregateAreaLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.12.1.2 | INTEGER | not-accessible | The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to. |
| ADR rcOspfv3AreaAggregatePrefix | 1.3.6.1.4.1.2272.1.67.1.1.12.1.3 | Ipv6Address | not-accessible | The IPv6 Prefix. |
| U32 rcOspfv3AreaAggregatePrefixLength | 1.3.6.1.4.1.2272.1.67.1.1.12.1.4 | Unsigned32 | not-accessible | The length of the prefix (in bits). A prefix can not be shorter than 3 bits. |
| ROW rcOspfv3AreaAggregateStatus | 1.3.6.1.4.1.2272.1.67.1.1.12.1.5 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| INT rcOspfv3AreaAggregateEffect | 1.3.6.1.4.1.2272.1.67.1.1.12.1.6 | INTEGER | read-write | Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at all outside the area. |
| I32 rcOspfv3AreaAggregateRouteTag | 1.3.6.1.4.1.2272.1.67.1.1.12.1.7 | Integer32 | read-write | This tag is advertised only in the summarized As-External LSA when summarizing from type-7 to type-5. |
| INT rcOspfv3AreaAggregateAdvertiseMetric | 1.3.6.1.4.1.2272.1.67.1.1.12.1.8 | INTEGER | read-write | Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric. |
| rcOspfv3Stats | 1.3.6.1.4.1.2272.1.67.1.1.13 | |||
| C32 rcOspfv3StatsTxPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.1 | Counter32 | read-only | Used to indicate the number of packets transmitted by OSPF. |
| C32 rcOspfv3StatsRxPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.2 | Counter32 | read-only | Used to indicate the number of packets received by OSPF. |
| C32 rcOspfv3StatsTxDropPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.3 | Counter32 | read-only | Used to indicate the number of packets dropped before transmitted by OSPF. |
| C32 rcOspfv3StatsRxDropPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.4 | Counter32 | read-only | Used to indicate the number of packets dropped before received by OSPF. |
| C32 rcOspfv3StatsRxBadPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.5 | Counter32 | read-only | Used to indicate the number of packets received by OSPF that are bad. |
| C32 rcOspfv3StatsSpfRuns | 1.3.6.1.4.1.2272.1.67.1.1.13.6 | Counter32 | read-only | Used to indicate the total number of SPF calculations performed by OSPF, which also includes the number of partial route table calculation for Incremental Updates. |
| TIK rcOspfv3StatsLastSpfRun | 1.3.6.1.4.1.2272.1.67.1.1.13.7 | TimeTicks | read-only | Used to indicate the time(SysUpTime) since the last spf calculated by OSPF. |
| G32 rcOspfv3StatsLsdbTblSize | 1.3.6.1.4.1.2272.1.67.1.1.13.8 | Gauge32 | read-only | Used to indicate the number of entries in the linkstate database table. |
| C32 rcOspfv3StatsBadLsReqs | 1.3.6.1.4.1.2272.1.67.1.1.13.9 | Counter32 | read-only | Used to indicate the number of bad ls requests. |
| C32 rcOspfv3StatsSeqMismatches | 1.3.6.1.4.1.2272.1.67.1.1.13.10 | Counter32 | read-only | Used to indicate the number of sequence mismatched packets. |
| rcOspfv3Conformance | 1.3.6.1.4.1.2272.1.67.1.2 | |||
| rcOspfv3Groups | 1.3.6.1.4.1.2272.1.67.1.2.1 | |||
| rcOspfv3BasicGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.1 | These objects are required for OSPFv3 systems. | ||
| rcOspfv3AreaGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.2 | These objects are required for OSPFv3 systems supporting areas. | ||
| rcOspfv3AsLsdbGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.3 | These objects are required for OSPFv3 systems that display their AS-scope link state database. | ||
| rcOspfv3AreaLsdbGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.4 | These objects are required for OSPFv3 systems that display their Area-scope link state database. | ||
| rcOspfv3LinkLsdbGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.5 | These objects are required for OSPFv3 systems that display their Link-scope link state database. | ||
| rcOspfv3HostGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.6 | These objects are required for OSPFv3 systems that support attached hosts. | ||
| rcOspfv3IfGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.7 | These interface objects are required for OSPFv3 systems. | ||
| rcOspfv3VirtIfGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.8 | These virtual interface objects are required for OSPFv3 systems. | ||
| rcOspfv3NbrGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.9 | These neighbor objects are required for OSPFv3 systems. | ||
| rcOspfv3NbmaNbrGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.10 | These NBMA neighbor objects are required for OSPFv3 systems. | ||
| rcOspfv3VirtNbrGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.11 | These virtual neighbor objects are required for OSPFv3 systems. | ||
| rcOspfv3AreaAggregateGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.12 | These area aggregate objects are required for OSPFv3 systems. | ||
| rcOspfv3Compliances | 1.3.6.1.4.1.2272.1.67.1.2.2 | |||
| rcOspfv3Compliance | 1.3.6.1.4.1.2272.1.67.1.2.2.1 | The compliance statement | ||
| rcCfm | 1.3.6.1.4.1.2272.1.69 | |||
| rcCfmMaintenanceDomainTable | 1.3.6.1.4.1.2272.1.69.1 | not-accessible | Connectivity Fault Management Maintenance Domain table | |
| rcCfmMaintenanceDomainEntry | 1.3.6.1.4.1.2272.1.69.1.1 | not-accessible | Connectivity Fault Management Maintenance Domain entry. | |
| INT rcCfmMaintenanceDomainIndex | 1.3.6.1.4.1.2272.1.69.1.1.1 | INTEGER | not-accessible | Maintenance Domain index |
| STR rcCfmMaintenanceDomainName | 1.3.6.1.4.1.2272.1.69.1.1.2 | DisplayString | read-create | Maintenance Domain Name |
| ROW rcCfmMaintenanceDomainRowStatus | 1.3.6.1.4.1.2272.1.69.1.1.3 | RowStatus | read-create | Used to create/delete entries |
| I32 rcCfmMaintenanceDomainNumOfMa | 1.3.6.1.4.1.2272.1.69.1.1.4 | Integer32 | read-only | Used to indicate the number of MAs belong to this maintenance domain |
| INT rcCfmMaintenanceDomainLevel | 1.3.6.1.4.1.2272.1.69.1.1.6 | INTEGER | read-create | To set the maintenance level in this domain |
| I32 rcCfmMaintenanceDomainNumOfMip | 1.3.6.1.4.1.2272.1.69.1.1.7 | Integer32 | read-only | Used to indicate the number of Mips belong to this maintenance domain |
| INT rcCfmMaintenanceDomainType | 1.3.6.1.4.1.2272.1.69.1.1.8 | INTEGER | read-only | To indicate the type of domain |
| rcCfmMaintenanceAssociationTable | 1.3.6.1.4.1.2272.1.69.2 | not-accessible | Connectivity Fault Management Maintenance Association table | |
| rcCfmMaintenanceAssociationEntry | 1.3.6.1.4.1.2272.1.69.2.1 | not-accessible | Connectivity Fault Management Maintenance Association entry. | |
| INT rcCfmMaintenanceAssociationDomainIndex | 1.3.6.1.4.1.2272.1.69.2.1.1 | INTEGER | not-accessible | Maintenance Association Domain Index |
| INT rcCfmMaintenanceAssociationAssociationIndex | 1.3.6.1.4.1.2272.1.69.2.1.2 | INTEGER | not-accessible | Maintenance Association Index |
| STR rcCfmMaintenanceAssociationDomainName | 1.3.6.1.4.1.2272.1.69.2.1.3 | DisplayString | read-only | Maintenance Association Domain Name |
| STR rcCfmMaintenanceAssociationAssociationName | 1.3.6.1.4.1.2272.1.69.2.1.4 | DisplayString | read-create | Maintenance Association Name |
| ENA rcCfmMaintenanceAssociationAdminState | 1.3.6.1.4.1.2272.1.69.2.1.5 | EnableValue | read-create | Administratively enable or disable a maintenance association. |
| ROW rcCfmMaintenanceAssociationRowStatus | 1.3.6.1.4.1.2272.1.69.2.1.6 | RowStatus | read-create | Used to create/delete entries |
| I32 rcCfmMaintenanceAssociationNumOfMep | 1.3.6.1.4.1.2272.1.69.2.1.12 | Integer32 | read-only | Used to indicate the number of MEPs belong to this maintenance association |
| rcCfmMaintenanceEndPointTable | 1.3.6.1.4.1.2272.1.69.3 | not-accessible | Connectivity Fault Management Maintenance Association table | |
| rcCfmMaintenanceEndPointEntry | 1.3.6.1.4.1.2272.1.69.3.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint entry. | |
| I32 rcCfmMaintenanceEndPointDomainIndex | 1.3.6.1.4.1.2272.1.69.3.1.1 | Integer32 | not-accessible | Maintenance Domain Name |
| I32 rcCfmMaintenanceEndPointAssociationIndex | 1.3.6.1.4.1.2272.1.69.3.1.2 | Integer32 | not-accessible | Maintenance Association Name |
| I32 rcCfmMaintenanceEndPointId | 1.3.6.1.4.1.2272.1.69.3.1.3 | Integer32 | not-accessible | Maintenance EndPoint ID |
| STR rcCfmMaintenanceEndPointDomainName | 1.3.6.1.4.1.2272.1.69.3.1.4 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmMaintenanceEndPointAssociationName | 1.3.6.1.4.1.2272.1.69.3.1.5 | DisplayString | read-only | Maintenance Association Name |
| ENA rcCfmMaintenanceEndPointAdminState | 1.3.6.1.4.1.2272.1.69.3.1.6 | EnableValue | read-create | Administratively enable or disable a maintenance EndPoint. |
| ROW rcCfmMaintenanceEndPointRowStatus | 1.3.6.1.4.1.2272.1.69.3.1.7 | RowStatus | read-create | Used to create/delete entries |
| INT rcCfmMaintenanceEndPointMepType | 1.3.6.1.4.1.2272.1.69.3.1.11 | INTEGER | read-only | Mep Type |
| STR rcCfmMaintenanceEndPointServiceDescription | 1.3.6.1.4.1.2272.1.69.3.1.13 | DisplayString | read-only | Used to specify what service this mep assigned to |
| INT rcCfmMaintenanceEndPointMepStatus | 1.3.6.1.4.1.2272.1.69.3.1.15 | INTEGER | read-only | Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active status. |
| rcCfmTransmitLbmTable | 1.3.6.1.4.1.2272.1.69.17 | not-accessible | Connectivity Fault Management transmit LBM table | |
| rcCfmTransmitLbmEntry | 1.3.6.1.4.1.2272.1.69.17.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint LBM entry. | |
| I32 rcCfmTransmitLbmDomainIndex | 1.3.6.1.4.1.2272.1.69.17.1.1 | Integer32 | not-accessible | Maintenance Domain Name |
| I32 rcCfmTransmitLbmAssociationIndex | 1.3.6.1.4.1.2272.1.69.17.1.2 | Integer32 | not-accessible | Maintenance Association Name |
| I32 rcCfmTransmitLbmIndex | 1.3.6.1.4.1.2272.1.69.17.1.3 | Integer32 | not-accessible | Maintenance EndPoint Index |
| STR rcCfmTransmitLbmDomainName | 1.3.6.1.4.1.2272.1.69.17.1.4 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmTransmitLbmAssociationName | 1.3.6.1.4.1.2272.1.69.17.1.5 | DisplayString | read-only | Maintenance Association Name |
| MAC rcCfmTransmitLbmDestMacAddress | 1.3.6.1.4.1.2272.1.69.17.1.6 | MacAddress | read-write | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| I32 rcCfmTransmitLbmDestMepId | 1.3.6.1.4.1.2272.1.69.17.1.7 | Integer32 | read-write | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association |
| T/F rcCfmTransmitLbmDestIsMepId | 1.3.6.1.4.1.2272.1.69.17.1.8 | TruthValue | read-write | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. |
| I32 rcCfmTransmitLbmMessages | 1.3.6.1.4.1.2272.1.69.17.1.9 | Integer32 | read-write | The number of loopback messages to be transmitted. |
| I32 rcCfmTransmitLbmVlanPriority | 1.3.6.1.4.1.2272.1.69.17.1.11 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame. |
| T/F rcCfmTransmitLbmVlanDropEnable | 1.3.6.1.4.1.2272.1.69.17.1.12 | TruthValue | read-write | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. |
| I32 rcCfmTransmitLbmSeqNumber | 1.3.6.1.4.1.2272.1.69.17.1.13 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitLbmResultOk | 1.3.6.1.4.1.2272.1.69.17.1.14 | TruthValue | read-only | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| INT rcCfmTransmitLbmStatus | 1.3.6.1.4.1.2272.1.69.17.1.15 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort The service is aborted or about to abort the Loopback messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| STR rcCfmTransmitLbmResult | 1.3.6.1.4.1.2272.1.69.17.1.16 | DisplayString | read-only | Display the LBM result. |
| I32 rcCfmTransmitLbmTimeoutInt | 1.3.6.1.4.1.2272.1.69.17.1.18 | Integer32 | read-write | The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| I32 rcCfmTransmitLbmInterFrameInt | 1.3.6.1.4.1.2272.1.69.17.1.19 | Integer32 | read-write | The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as possible. |
| INT rcCfmTransmitLbmTestPattern | 1.3.6.1.4.1.2272.1.69.17.1.20 | INTEGER | read-write | The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -------- ------- allZero(1) Null signal without CRC-32 allZeroCrc(2) Null signal with CRC-32 pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32 pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32 |
| I32 rcCfmTransmitLbmDataSize | 1.3.6.1.4.1.2272.1.69.17.1.21 | Integer32 | read-write | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| I32 rcCfmTransmitLbmFrameSize | 1.3.6.1.4.1.2272.1.69.17.1.22 | Integer32 | read-write | If the frame size (64-500 for R-Mod and 64-9600 for RC-Mod)is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| INT rcCfmTransmitLbmSourceMode | 1.3.6.1.4.1.2272.1.69.17.1.23 | INTEGER | read-write | Source modes of the transmit loopback service. |
| rcCfmTransmitLtmTable | 1.3.6.1.4.1.2272.1.69.18 | not-accessible | Connectivity Fault Management transmit LTM table | |
| rcCfmTransmitLtmEntry | 1.3.6.1.4.1.2272.1.69.18.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint LTM entry. | |
| I32 rcCfmTransmitLtmDomainIndex | 1.3.6.1.4.1.2272.1.69.18.1.1 | Integer32 | not-accessible | Maintenance Domain Name |
| I32 rcCfmTransmitLtmAssociationIndex | 1.3.6.1.4.1.2272.1.69.18.1.2 | Integer32 | not-accessible | Maintenance Association Name |
| I32 rcCfmTransmitLtmIndex | 1.3.6.1.4.1.2272.1.69.18.1.3 | Integer32 | not-accessible | Maintenance EndPoint Index |
| STR rcCfmTransmitLtmDomainName | 1.3.6.1.4.1.2272.1.69.18.1.4 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmTransmitLtmAssociationName | 1.3.6.1.4.1.2272.1.69.18.1.5 | DisplayString | read-only | Maintenance Association Name |
| I32 rcCfmTransmitLtmVlanPriority | 1.3.6.1.4.1.2272.1.69.18.1.6 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. |
| MAC rcCfmTransmitLtmDestMacAddress | 1.3.6.1.4.1.2272.1.69.18.1.7 | MacAddress | read-write | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| I32 rcCfmTransmitLtmDestMepId | 1.3.6.1.4.1.2272.1.69.18.1.8 | Integer32 | read-write | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association |
| T/F rcCfmTransmitLtmDestIsMepId | 1.3.6.1.4.1.2272.1.69.18.1.9 | TruthValue | read-write | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. |
| I32 rcCfmTransmitLtmTtl | 1.3.6.1.4.1.2272.1.69.18.1.10 | Integer32 | read-write | The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, the LTM is not transmitted to the next hop. The value of the TTL Field in the LTM transmitted by the originating MEP is controlled by a Managed Object; The default value if none is specified is 64. |
| I32 rcCfmTransmitLtmSeqNumber | 1.3.6.1.4.1.2272.1.69.18.1.11 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitLtmResultOk | 1.3.6.1.4.1.2272.1.69.18.1.12 | TruthValue | read-only | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| INT rcCfmTransmitLtmStatus | 1.3.6.1.4.1.2272.1.69.18.1.13 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort. The service is aborted, or about to abort the LTM message This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| STR rcCfmTransmitLtmResult | 1.3.6.1.4.1.2272.1.69.18.1.14 | DisplayString | read-only | Display the LTM result. |
| INT rcCfmTransmitLtmFlag | 1.3.6.1.4.1.2272.1.69.18.1.15 | INTEGER | read-only | LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote Maintenance End Point 4 - Invalid Remote Maintenance End Point Mac Address 5 - Unset Remote Maintenance End Point Mac Address 6 - Mep must be enabled in order to perform LTM 7 - No Ltr response received 8 - Linktrace to own Mep MAC is not sent 9 - Endpoint must be enabled in order to perform LTM 10 - Pbt-trunk must be enabled in order to perform LTM 11 - LTM completed 12 - LTM leaf node |
| INT rcCfmTransmitLtmSourceMode | 1.3.6.1.4.1.2272.1.69.18.1.16 | INTEGER | read-write | Source modes of the transmit linktrace service. |
| rcCfmLtrReplyTable | 1.3.6.1.4.1.2272.1.69.33 | not-accessible | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. | |
| rcCfmLtrReplyEntry | 1.3.6.1.4.1.2272.1.69.33.1 | not-accessible | The Linktrace Reply table entry. | |
| I32 rcCfmLtrReplyDomainIndex | 1.3.6.1.4.1.2272.1.69.33.1.1 | Integer32 | not-accessible | Maintenance Domain Index |
| I32 rcCfmLtrReplyAssociationIndex | 1.3.6.1.4.1.2272.1.69.33.1.2 | Integer32 | not-accessible | Maintenance Association Index |
| I32 rcCfmLtrReplyMepId | 1.3.6.1.4.1.2272.1.69.33.1.3 | Integer32 | not-accessible | Maintenance EndPoint ID |
| I32 rcCfmLtrReplySeqNumber | 1.3.6.1.4.1.2272.1.69.33.1.4 | Integer32 | not-accessible | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| I32 rcCfmLtrReplyHop | 1.3.6.1.4.1.2272.1.69.33.1.5 | Integer32 | not-accessible | The number of hops away from LTM initiator |
| I32 rcCfmLtrReplyReceiveOrder | 1.3.6.1.4.1.2272.1.69.33.1.6 | Integer32 | not-accessible | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. |
| I32 rcCfmLtrReplyTtl | 1.3.6.1.4.1.2272.1.69.33.1.7 | Integer32 | read-only | Ttl field value for a returned LTR. |
| STR rcCfmLtrReplyDomainName | 1.3.6.1.4.1.2272.1.69.33.1.8 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmLtrReplyAssociationName | 1.3.6.1.4.1.2272.1.69.33.1.9 | DisplayString | read-only | Maintenance Association Name |
| T/F rcCfmLtrReplyForwarded | 1.3.6.1.4.1.2272.1.69.33.1.10 | TruthValue | read-only | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| T/F rcCfmLtrReplyTerminalMep | 1.3.6.1.4.1.2272.1.69.33.1.11 | TruthValue | read-only | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| OCT rcCfmLtrReplyLastEgressIdentifier | 1.3.6.1.4.1.2272.1.69.33.1.12 | OCTET STRING | read-only | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Indicator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM. |
| OCT rcCfmLtrReplyNextEgressIdentifier | 1.3.6.1.4.1.2272.1.69.33.1.13 | OCTET STRING | read-only | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, and the field is ignored by the receiver. |
| CFM rcCfmLtrReplyRelayAction | 1.3.6.1.4.1.2272.1.69.33.1.14 | CfmRelayActionFieldValue | read-only | Value returned in the Relay Action field. |
| MAC rcCfmLtrReplySrcMac | 1.3.6.1.4.1.2272.1.69.33.1.15 | MacAddress | read-only | Mac address of the MP that respond to the LTM request for this LTR |
| CFM rcCfmLtrReplyIngressAction | 1.3.6.1.4.1.2272.1.69.33.1.16 | CfmIngressActionFieldValue | read-only | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM. |
| MAC rcCfmLtrReplyIngressMac | 1.3.6.1.4.1.2272.1.69.33.1.17 | MacAddress | read-only | Mac address returned in the ingress MAC address field. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyIngressPortIdSubtype | 1.3.6.1.4.1.2272.1.69.33.1.18 | LldpPortIdSubtype | read-only | Format of the Ingress Port ID. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyIngressPortId | 1.3.6.1.4.1.2272.1.69.33.1.19 | LldpPortId | read-only | Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyIngressPortIdSubtype object. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| CFM rcCfmLtrReplyEgressAction | 1.3.6.1.4.1.2272.1.69.33.1.20 | CfmEgressActionFieldValue | read-only | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM. |
| MAC rcCfmLtrReplyEgressMac | 1.3.6.1.4.1.2272.1.69.33.1.21 | MacAddress | read-only | Mac address returned in the egress MAC address field. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyEgressPortIdSubtype | 1.3.6.1.4.1.2272.1.69.33.1.22 | LldpPortIdSubtype | read-only | Format of the Egress Port ID. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyEgressPortId | 1.3.6.1.4.1.2272.1.69.33.1.23 | LldpPortId | read-only | Egress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyEgressPortIdSubtype object. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| rcCfmTransmitL2PingTable | 1.3.6.1.4.1.2272.1.69.34 | not-accessible | Connectivity Fault Management transmit L2Ping table | |
| rcCfmTransmitL2PingEntry | 1.3.6.1.4.1.2272.1.69.34.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint L2Ping entry. | |
| I32 rcCfmTransmitL2PingVlanId | 1.3.6.1.4.1.2272.1.69.34.1.1 | Integer32 | not-accessible | A value that uniquely identifies the Customer Vlan |
| MAC rcCfmTransmitL2PingDestMacAddress | 1.3.6.1.4.1.2272.1.69.34.1.2 | MacAddress | read-write | An indication of the target MAC Address field to be transmitted |
| OCT rcCfmTransmitL2PingHostName | 1.3.6.1.4.1.2272.1.69.34.1.3 | OCTET STRING | read-write | The target host name |
| T/F rcCfmTransmitL2PingDestIsHostName | 1.3.6.1.4.1.2272.1.69.34.1.4 | TruthValue | read-write | True indicates that the host name is used for L2Ping transmission |
| I32 rcCfmTransmitL2PingMessages | 1.3.6.1.4.1.2272.1.69.34.1.5 | Integer32 | read-write | The number of L2Ping messages to be transmitted. |
| I32 rcCfmTransmitL2PingPriority | 1.3.6.1.4.1.2272.1.69.34.1.6 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| I32 rcCfmTransmitL2PingTimeoutInt | 1.3.6.1.4.1.2272.1.69.34.1.7 | Integer32 | read-write | The interval to wait for an L2Ping time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| INT rcCfmTransmitL2PingTestPattern | 1.3.6.1.4.1.2272.1.69.34.1.8 | INTEGER | read-write | The test pattern to use in the L2Ping PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -------- ------- allZero(1) Null signal without CRC-32 allZeroCrc(2) Null signal with CRC-32 pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32 pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32 |
| I32 rcCfmTransmitL2PingDataSize | 1.3.6.1.4.1.2272.1.69.34.1.9 | Integer32 | read-write | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| I32 rcCfmTransmitL2PingFrameSize | 1.3.6.1.4.1.2272.1.69.34.1.10 | Integer32 | read-write | If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| INT rcCfmTransmitL2PingSourceMode | 1.3.6.1.4.1.2272.1.69.34.1.11 | INTEGER | read-write | Source modes of the transmit loopback service. |
| I32 rcCfmTransmitL2PingSeqNumber | 1.3.6.1.4.1.2272.1.69.34.1.12 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitL2PingResultOk | 1.3.6.1.4.1.2272.1.69.34.1.13 | TruthValue | read-only | Indicates the result of the operation: -true. The L2Ping Message(s) will be (or have been) sent. -false. The L2Ping Message(s) will not be sent. |
| INT rcCfmTransmitL2PingStatus | 1.3.6.1.4.1.2272.1.69.34.1.14 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Ping messages. -abort The service is aborted or about to abort the L2Ping messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| STR rcCfmTransmitL2PingResult | 1.3.6.1.4.1.2272.1.69.34.1.15 | DisplayString | read-only | Display the L2Ping result. |
| rcCfmTransmitL2TraceTable | 1.3.6.1.4.1.2272.1.69.35 | not-accessible | Connectivity Fault Management transmit L2Trace table | |
| rcCfmTransmitL2TraceEntry | 1.3.6.1.4.1.2272.1.69.35.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint L2Trace entry. | |
| I32 rcCfmTransmitL2TraceVlanId | 1.3.6.1.4.1.2272.1.69.35.1.1 | Integer32 | not-accessible | A value that uniquely identifies the Customer Vlan |
| I32 rcCfmTransmitL2TracePriority | 1.3.6.1.4.1.2272.1.69.35.1.2 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| MAC rcCfmTransmitL2TraceDestMacAddress | 1.3.6.1.4.1.2272.1.69.35.1.3 | MacAddress | read-write | An indication of the target MAC Address field to be transmitted |
| OCT rcCfmTransmitL2TraceHostName | 1.3.6.1.4.1.2272.1.69.35.1.4 | OCTET STRING | read-write | The target host name |
| I32 rcCfmTransmitL2TraceIsid | 1.3.6.1.4.1.2272.1.69.35.1.5 | Integer32 | read-write | Isid Id |
| STR rcCfmTransmitL2TraceNickName | 1.3.6.1.4.1.2272.1.69.35.1.6 | DisplayString | read-only | Local Node nick name |
| T/F rcCfmTransmitL2TraceDestIsHostName | 1.3.6.1.4.1.2272.1.69.35.1.7 | TruthValue | read-write | True indicates that the host name is used for L2Trace transmission |
| T/F rcCfmTransmitL2TraceIsidTree | 1.3.6.1.4.1.2272.1.69.35.1.8 | TruthValue | read-write | True indicates that the multicast tree will be traced. False indicates that the unicast path will be traced |
| I32 rcCfmTransmitL2TraceTtl | 1.3.6.1.4.1.2272.1.69.35.1.9 | Integer32 | read-write | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 on output, the L2Trace is not transmitted to the next hop. The value of the TTL Field in the L2Trace transmitted by the originating MEP is controlled by a Managed Object; The default value if none is specified is 64. |
| INT rcCfmTransmitL2TraceSourceMode | 1.3.6.1.4.1.2272.1.69.35.1.10 | INTEGER | read-write | Source modes of the transmit loopback service. |
| I32 rcCfmTransmitL2TraceSeqNumber | 1.3.6.1.4.1.2272.1.69.35.1.11 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitL2TraceResultOk | 1.3.6.1.4.1.2272.1.69.35.1.12 | TruthValue | read-only | Indicates the result of the operation: -true. The L2Trace Message(s) will be (or have been) sent. -false. The L2Trace Message(s) will not be sent. |
| INT rcCfmTransmitL2TraceStatus | 1.3.6.1.4.1.2272.1.69.35.1.13 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. -abort The service is aborted or about to abort the L2Trace messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| INT rcCfmTransmitL2TraceFlag | 1.3.6.1.4.1.2272.1.69.35.1.14 | INTEGER | read-only | L2Trace result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac Address 4 - Mep must be enabled in order to perform L2Trace 5 - No L2Trace response received 6 - L2Trace to own Mep MAC is not sent 7 - L2Trace completed 8 - Lookup failure for L2Trace 9 - On a leaf node in the i-sid tree 10 - Not in the i-sid tree 11 - Requested SMLT Source from Non-Primary Node |
| rcCfmL2TraceReplyTable | 1.3.6.1.4.1.2272.1.69.36 | not-accessible | This table contains a list of l2trace replies received by a specific MEP in response to a linktrace message. | |
| rcCfmL2TraceReplyEntry | 1.3.6.1.4.1.2272.1.69.36.1 | not-accessible | The Linktrace Reply table entry. | |
| I32 rcCfmL2TraceReplyVlanId | 1.3.6.1.4.1.2272.1.69.36.1.1 | Integer32 | not-accessible | A value that uniquely identifies the Customer Vlan |
| I32 rcCfmL2TraceReplySeqNumber | 1.3.6.1.4.1.2272.1.69.36.1.2 | Integer32 | not-accessible | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which L2Trace's response is going to be returned. |
| I32 rcCfmL2TraceReplyHop | 1.3.6.1.4.1.2272.1.69.36.1.3 | Integer32 | not-accessible | The number of hops away from L2Trace initiator. |
| I32 rcCfmL2TraceReplyReceiveOrder | 1.3.6.1.4.1.2272.1.69.36.1.4 | Integer32 | not-accessible | An index to distinguish among multiple L2Trace responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the responses. |
| I32 rcCfmL2TraceReplyTtl | 1.3.6.1.4.1.2272.1.69.36.1.5 | Integer32 | read-only | Ttl field value for a returned L2Trace response. |
| MAC rcCfmL2TraceReplySrcMac | 1.3.6.1.4.1.2272.1.69.36.1.6 | MacAddress | read-only | Mac address of the MP that respond to the L2Trace request for this L2traceReply |
| OCT rcCfmL2TraceReplyHostName | 1.3.6.1.4.1.2272.1.69.36.1.7 | OCTET STRING | read-only | The host name of the replying node |
| MAC rcCfmL2TraceReplyLastSrcMac | 1.3.6.1.4.1.2272.1.69.36.1.8 | MacAddress | read-only | The MAC address of the node that forwarded the L2Trace to the responding node |
| OCT rcCfmL2TraceReplyLastHostName | 1.3.6.1.4.1.2272.1.69.36.1.9 | OCTET STRING | read-only | The host name of the node that forwarded the L2Trace to the responding node |
| rcCfmTransmitL2IpPingTable | 1.3.6.1.4.1.2272.1.69.37 | not-accessible | Connectivity Fault Management transmit L2IpPing table | |
| rcCfmTransmitL2IpPingEntry | 1.3.6.1.4.1.2272.1.69.37.1 | not-accessible | L2IpPing entry. | |
| IPt rcCfmTransmitL2IpPingIpAddrType | 1.3.6.1.4.1.2272.1.69.37.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmTransmitL2IpPingIpAddr | 1.3.6.1.4.1.2272.1.69.37.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmTransmitL2IpPingVrfId | 1.3.6.1.4.1.2272.1.69.37.1.3 | Integer32 | read-only | VRF ID |
| STR rcCfmTransmitL2IpPingVrfName | 1.3.6.1.4.1.2272.1.69.37.1.4 | DisplayString | read-only | The Name of the Virtual Router |
| I32 rcCfmTransmitL2IpPingMessages | 1.3.6.1.4.1.2272.1.69.37.1.5 | Integer32 | read-create | The number of L2IpPing messages to be transmitted per mac/vlan pair. |
| I32 rcCfmTransmitL2IpPingTimeoutInt | 1.3.6.1.4.1.2272.1.69.37.1.6 | Integer32 | read-create | The interval to wait for an L2IpPing time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| INT rcCfmTransmitL2IpPingTestPattern | 1.3.6.1.4.1.2272.1.69.37.1.7 | INTEGER | read-create | The test pattern to use in the L2IpPing PDUs with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -------- ------- allZero(1) Null signal without CRC-32 allZeroCrc(2) Null signal with CRC-32 pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32 pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32 |
| I32 rcCfmTransmitL2IpPingDataSize | 1.3.6.1.4.1.2272.1.69.37.1.8 | Integer32 | read-create | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| INT rcCfmTransmitL2IpPingStatus | 1.3.6.1.4.1.2272.1.69.37.1.9 | INTEGER | read-create | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2IpPing messages. -abort The service is aborted or about to abort the L2IpPing messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| T/F rcCfmTransmitL2IpPingResultOk | 1.3.6.1.4.1.2272.1.69.37.1.10 | TruthValue | read-only | Indicates the result of the operation: -true. L2IpPing Message(s) will be/have been sent. -false. L2IpPing Message(s) will not be sent. |
| I32 rcCfmTransmitL2IpPingPathsFound | 1.3.6.1.4.1.2272.1.69.37.1.11 | Integer32 | read-only | The number of paths found to execute l2ping command |
| ROW rcCfmTransmitL2IpPingRowStatus | 1.3.6.1.4.1.2272.1.69.37.1.12 | RowStatus | read-create | Used to create/delete entries in the rcCfmTransmitL2IpPingTable. Deletion of an entry in this table results in corresponding rcCfmL2IpPingReplyTable entries being deleted. |
| rcCfmL2IpPingReplyTable | 1.3.6.1.4.1.2272.1.69.38 | not-accessible | This table contains a list of l2 ip ping replies received | |
| rcCfmL2IpPingReplyEntry | 1.3.6.1.4.1.2272.1.69.38.1 | not-accessible | The L2 Ip Ping Reply table entry. | |
| IPt rcCfmL2IpPingReplyIpAddrType | 1.3.6.1.4.1.2272.1.69.38.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmL2IpPingReplyIpAddr | 1.3.6.1.4.1.2272.1.69.38.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmL2IpPingReplySendOrder | 1.3.6.1.4.1.2272.1.69.38.1.3 | Integer32 | not-accessible | An index to distinguish among multiple L2Ping sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to the number of paths found and stored in the rcCfmTransmitL2IpPingEntry. |
| I32 rcCfmL2IpPingReplyVrfId | 1.3.6.1.4.1.2272.1.69.38.1.4 | Integer32 | read-only | VRF ID |
| I32 rcCfmL2IpPingReplyVlanId | 1.3.6.1.4.1.2272.1.69.38.1.5 | Integer32 | read-only | Vlan found from L3 lookup and used for transmission |
| MAC rcCfmL2IpPingReplyDestMacAddress | 1.3.6.1.4.1.2272.1.69.38.1.6 | MacAddress | read-only | An indication of the target MAC Address transmitted |
| NUM rcCfmL2IpPingReplyPortNum | 1.3.6.1.4.1.2272.1.69.38.1.7 | InterfaceIndex | read-only | Either the value '0', or the port number of the port used for the l2ping. |
| OCT rcCfmL2IpPingReplyDestHostName | 1.3.6.1.4.1.2272.1.69.38.1.8 | OCTET STRING | read-only | The host name of the responding node |
| I32 rcCfmL2IpPingReplySize | 1.3.6.1.4.1.2272.1.69.38.1.9 | Integer32 | read-only | The number of bytes of data sent |
| I32 rcCfmL2IpPingReplyPktsTx | 1.3.6.1.4.1.2272.1.69.38.1.10 | Integer32 | read-only | Number of Packets transmitted for this vlan/mac |
| I32 rcCfmL2IpPingReplyPktsRx | 1.3.6.1.4.1.2272.1.69.38.1.11 | Integer32 | read-only | Number of Packets received for this vlan/mac |
| I32 rcCfmL2IpPingReplyPercentLossWhole | 1.3.6.1.4.1.2272.1.69.38.1.12 | Integer32 | read-only | Percentage of packet loss for this vlan/mac |
| I32 rcCfmL2IpPingReplyPercentLossFract | 1.3.6.1.4.1.2272.1.69.38.1.13 | Integer32 | read-only | Percentage of packet loss for this vlan/mac |
| I32 rcCfmL2IpPingReplyMinRoundTrip | 1.3.6.1.4.1.2272.1.69.38.1.14 | Integer32 | read-only | Min time for round-trip for this vlan/mac in us |
| I32 rcCfmL2IpPingReplyMaxRoundTrip | 1.3.6.1.4.1.2272.1.69.38.1.15 | Integer32 | read-only | Max time for round-trip for this vlan/mac in us |
| I32 rcCfmL2IpPingReplyRttAvgWhole | 1.3.6.1.4.1.2272.1.69.38.1.16 | Integer32 | read-only | Average time for round-trip for this vlan/mac in us |
| I32 rcCfmL2IpPingReplyRttAvgFract | 1.3.6.1.4.1.2272.1.69.38.1.17 | Integer32 | read-only | Fractional portion of Average time for round-trip |
| INT rcCfmL2IpPingReplyFlag | 1.3.6.1.4.1.2272.1.69.38.1.18 | INTEGER | read-only | Result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Invalid Ip 4 - L2Trace completed 5 - Lookup failure for IP (no vlan/mac entries) |
| rcCfmTransmitL2IpTraceTable | 1.3.6.1.4.1.2272.1.69.39 | not-accessible | Connectivity Fault Management transmit L2IpTrace table | |
| rcCfmTransmitL2IpTraceEntry | 1.3.6.1.4.1.2272.1.69.39.1 | not-accessible | L2IpTrace entry. | |
| IPt rcCfmTransmitL2IpTraceIpAddrType | 1.3.6.1.4.1.2272.1.69.39.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmTransmitL2IpTraceIpAddr | 1.3.6.1.4.1.2272.1.69.39.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmTransmitL2IpTraceVrfId | 1.3.6.1.4.1.2272.1.69.39.1.3 | Integer32 | read-only | VRF ID |
| STR rcCfmTransmitL2IpTraceVrfName | 1.3.6.1.4.1.2272.1.69.39.1.4 | DisplayString | read-only | The Name of the Virtual Router |
| I32 rcCfmTransmitL2IpTraceTtl | 1.3.6.1.4.1.2272.1.69.39.1.5 | Integer32 | read-create | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 on output, the L2Trace is not transmitted to the next hop. The value of the TTL Field in the L2Trace transmitted by the originating MEP is controlled by a Managed Object; The default value if none is specified is 64. |
| INT rcCfmTransmitL2IpTraceStatus | 1.3.6.1.4.1.2272.1.69.39.1.6 | INTEGER | read-create | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. -abort The service is aborted or about to abort the L2Trace messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| T/F rcCfmTransmitL2IpTraceResultOk | 1.3.6.1.4.1.2272.1.69.39.1.7 | TruthValue | read-only | Indicates the result of the operation: -true. The Trace Message(s) will be/have been sent. -false. The Trace Message(s) will not be sent. |
| I32 rcCfmTransmitL2IpTracePathsFound | 1.3.6.1.4.1.2272.1.69.39.1.8 | Integer32 | read-only | The number of paths found to execute l2trace command |
| ROW rcCfmTransmitL2IpTraceRowStatus | 1.3.6.1.4.1.2272.1.69.39.1.9 | RowStatus | read-create | Used to create/delete entries in the rcCfmTransmitL2IpTraceTable. Deletion of an entry in this table results in corresponding rcCfmL2IpTraceReplyTable entries being deleted. |
| rcCfmL2IpTraceReplyTable | 1.3.6.1.4.1.2272.1.69.40 | not-accessible | This table contains a list of l2 ip trace replies received by a specific MEP in response to a linktrace message. | |
| rcCfmL2IpTraceReplyEntry | 1.3.6.1.4.1.2272.1.69.40.1 | not-accessible | The L2 Ip Trace Reply table entry. | |
| IPt rcCfmL2IpTraceReplyIpAddrType | 1.3.6.1.4.1.2272.1.69.40.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmL2IpTraceReplyIpAddr | 1.3.6.1.4.1.2272.1.69.40.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmL2IpTraceReplySendOrder | 1.3.6.1.4.1.2272.1.69.40.1.3 | Integer32 | not-accessible | An index to distinguish among multiple L2Trace sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to the number of paths found and stored in the rcCfmTransmitL2IpTraceEntry. |
| I32 rcCfmL2IpTraceReplyHop | 1.3.6.1.4.1.2272.1.69.40.1.4 | Integer32 | not-accessible | The number of L2 hops away from L2Trace initiator. |
| I32 rcCfmL2IpTraceReplyReceiveOrder | 1.3.6.1.4.1.2272.1.69.40.1.5 | Integer32 | not-accessible | An index to distinguish among multiple L2Trace responses with the same Send Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the responses. A zero value may be seen in error conditions |
| I32 rcCfmL2IpTraceReplyTtl | 1.3.6.1.4.1.2272.1.69.40.1.6 | Integer32 | read-only | Ttl field value for a returned L2Trace response. |
| I32 rcCfmL2IpTraceReplyVrfId | 1.3.6.1.4.1.2272.1.69.40.1.7 | Integer32 | read-only | VRF ID |
| I32 rcCfmL2IpTraceReplyVlanId | 1.3.6.1.4.1.2272.1.69.40.1.8 | Integer32 | read-only | Vlan found from L3 lookup and used for transmission |
| MAC rcCfmL2IpTraceReplyDestMacAddress | 1.3.6.1.4.1.2272.1.69.40.1.9 | MacAddress | read-only | An indication of the target MAC Address transmitted |
| I32 rcCfmL2IpTraceReplySeqNumber | 1.3.6.1.4.1.2272.1.69.40.1.10 | Integer32 | read-only | The transaction identifier/sequence number used in linktrace message packet |
| NUM rcCfmL2IpTraceReplyPortNum | 1.3.6.1.4.1.2272.1.69.40.1.11 | InterfaceIndex | read-only | Either the value '0', or the port number of the port used for the l2trace. |
| MAC rcCfmL2IpTraceReplySrcMac | 1.3.6.1.4.1.2272.1.69.40.1.12 | MacAddress | read-only | Mac address of the MP that responded to L2Trace request for this L2traceReply |
| OCT rcCfmL2IpTraceReplyHostName | 1.3.6.1.4.1.2272.1.69.40.1.13 | OCTET STRING | read-only | The host name of the replying node |
| MAC rcCfmL2IpTraceReplyLastSrcMac | 1.3.6.1.4.1.2272.1.69.40.1.14 | MacAddress | read-only | The MAC address of the node that forwarded the L2Trace to the responding node |
| OCT rcCfmL2IpTraceReplyLastHostName | 1.3.6.1.4.1.2272.1.69.40.1.15 | OCTET STRING | read-only | The host name of the node that forwarded the L2Trace to the responding node |
| INT rcCfmL2IpTraceReplyFlag | 1.3.6.1.4.1.2272.1.69.40.1.16 | INTEGER | read-only | L2Trace result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac Address 4 - Mep must be enabled in order to perform L2Trace 5 - No L2Trace response received 6 - L2Trace to own Mep MAC is not sent 7 - L2Trace completed 8 - Lookup failure for L2Trace |
| rcPlugOptMod | 1.3.6.1.4.1.2272.1.71 | |||
| rcPlugOptModTable | 1.3.6.1.4.1.2272.1.71.1 | not-accessible | Gibc SFF diagnostic info table | |
| rcPlugOptModEntry | 1.3.6.1.4.1.2272.1.71.1.1 | not-accessible | Entry containing info. for a particular port | |
| NUM rcPlugOptModPortIndex | 1.3.6.1.4.1.2272.1.71.1.1.1 | InterfaceIndex | read-only | An index value that uniquely identifies a port on a blade or line-card. |
| BIT rcPlugOptModDdmStatusMask | 1.3.6.1.4.1.2272.1.71.1.1.2 | Bits | read-only | Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed. |
| INT rcPlugOptModCalibration | 1.3.6.1.4.1.2272.1.71.1.1.3 | INTEGER | read-only | The identifier value indicates type of calibration. |
| INT rcPlugOptModPowerMeasure | 1.3.6.1.4.1.2272.1.71.1.1.4 | INTEGER | read-only | The identifier value indicates type of external power. |
| STR rcPlugOptModConnectorType | 1.3.6.1.4.1.2272.1.71.1.1.5 | DisplayString | read-only | The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name that indicates some characteristic of the layer-1 interface. |
| STR rcPlugOptModVendorName | 1.3.6.1.4.1.2272.1.71.1.1.6 | DisplayString | read-only | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the full name of the corporation, a commonly accepted abbreviation of the name, the SCSI company code, or the stock exchange code for the corporation. |
| STR rcPlugOptModVendorPartNumber | 1.3.6.1.4.1.2272.1.71.1.1.7 | DisplayString | read-only | The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part number or product name. |
| STR rcPlugOptModVendorRevNumber | 1.3.6.1.4.1.2272.1.71.1.1.8 | DisplayString | read-only | The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor product revision number. |
| STR rcPlugOptModVendorSN | 1.3.6.1.4.1.2272.1.71.1.1.9 | DisplayString | read-only | The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor serial number for the transceiver. |
| STR rcPlugOptModVendorDateCode | 1.3.6.1.4.1.2272.1.71.1.1.10 | DisplayString | read-only | The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low order digits of the year (00=2000), MM is the month, 01 thru 12, DD is the day, 01 thru 31, and LC is an optional vendor specific lot code. |
| STR rcPlugOptModPEC | 1.3.6.1.4.1.2272.1.71.1.1.11 | DisplayString | read-only | This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, so the 10th through 16th byte should be NULL. |
| STR rcPlugOptModCLEI | 1.3.6.1.4.1.2272.1.71.1.1.12 | DisplayString | read-only | This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telcordia human-readable representation of the 1D barcode. |
| T/F rcPlugOptModSupportsDDM | 1.3.6.1.4.1.2272.1.71.1.1.13 | TruthValue | read-only | This boolean indicates whether or not the device supports the DDM capability. |
| INT rcPlugOptModAux1Monitoring | 1.3.6.1.4.1.2272.1.71.1.1.14 | INTEGER | read-only | This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA) |
| INT rcPlugOptModAux2Monitoring | 1.3.6.1.4.1.2272.1.71.1.1.15 | INTEGER | read-only | This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA) |
| I32 rcPlugOptModWaveLength | 1.3.6.1.4.1.2272.1.71.1.1.16 | Integer32 | read-only | Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters. |
| INT rcPlugOptModTemperature | 1.3.6.1.4.1.2272.1.71.1.1.17 | INTEGER | read-only | This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0.0001 accuracy.The most significant byte is the signed integer part of the number and the least significant byte is the fraction. |
| INT rcPlugOptModTemperatureHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.18 | INTEGER | read-only | This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expressed in the same units as the measured temperature. |
| INT rcPlugOptModTemperatureLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.19 | INTEGER | read-only | This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is expressed in the same units as the measured temperature. |
| INT rcPlugOptModTemperatureHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.20 | INTEGER | read-only | This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asserted. It is expressed in the same units as the measured temperature. |
| INT rcPlugOptModTemperatureLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.21 | INTEGER | read-only | This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is asserted. It is expressed in the same units as the measured temperature. |
| INT rcPlugOptModVoltage | 1.3.6.1.4.1.2272.1.71.1.1.22 | INTEGER | read-only | This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV. |
| INT rcPlugOptModVoltageHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.23 | INTEGER | read-only | This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive number expressed in microvolts. |
| INT rcPlugOptModVoltageLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.24 | INTEGER | read-only | This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive number expressed in microvolts. |
| INT rcPlugOptModVoltageHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.25 | INTEGER | read-only | This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It is a positive number expressed in microvolts. |
| INT rcPlugOptModVoltageLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.26 | INTEGER | read-only | This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It is a positive number expressed in microvolts. |
| INT rcPlugOptModBias | 1.3.6.1.4.1.2272.1.71.1.1.27 | INTEGER | read-only | This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| INT rcPlugOptModBiasHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.28 | INTEGER | read-only | This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| INT rcPlugOptModBiasLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.29 | INTEGER | read-only | This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| INT rcPlugOptModBiasHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.30 | INTEGER | read-only | This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| INT rcPlugOptModBiasLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.31 | INTEGER | read-only | This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| INT rcPlugOptModTxPower | 1.3.6.1.4.1.2272.1.71.1.1.32 | INTEGER | read-only | This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModTxPowerHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.33 | INTEGER | read-only | This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModTxPowerLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.34 | INTEGER | read-only | This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModTxPowerHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.35 | INTEGER | read-only | This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModTxPowerLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.36 | INTEGER | read-only | This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power low warning is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModRxPower | 1.3.6.1.4.1.2272.1.71.1.1.37 | INTEGER | read-only | This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModRxPowerHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.38 | INTEGER | read-only | This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModRxPowerLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.39 | INTEGER | read-only | This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModRxPowerHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.40 | INTEGER | read-only | This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 uW (-40 to 18.16 dBm). |
| INT rcPlugOptModRxPowerLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.41 | INTEGER | read-only | This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| INT rcPlugOptModAux1 | 1.3.6.1.4.1.2272.1.71.1.1.42 | INTEGER | read-only | This represents the internally measured A/D value specified. |
| INT rcPlugOptModAux1HighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.43 | INTEGER | read-only | This value represents the vendor specified high Aux1 threshold. |
| INT rcPlugOptModAux1LowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.44 | INTEGER | read-only | This value represents the vendor specified low Aux1 threshold. |
| INT rcPlugOptModAux1HighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.45 | INTEGER | read-only | This value represents the vendor specified high Aux1 warning threshold. |
| INT rcPlugOptModAux1LowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.46 | INTEGER | read-only | This value represents the vendor specified low Aux1 warning threshold. |
| INT rcPlugOptModAux2 | 1.3.6.1.4.1.2272.1.71.1.1.47 | INTEGER | read-only | This represents the internally measured A/D value specified. |
| INT rcPlugOptModAux2HighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.48 | INTEGER | read-only | This value represents the vendor specified high Aux1 threshold. |
| INT rcPlugOptModAux2LowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.49 | INTEGER | read-only | This value represents the vendor specified low Aux1 threshold. |
| INT rcPlugOptModAux2HighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.50 | INTEGER | read-only | This value represents the vendor specified high Aux1 warning threshold. |
| INT rcPlugOptModAux2LowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.51 | INTEGER | read-only | This value represents the vendor specified low Aux1 warning threshold. |
| INT rcPlugOptModTemperatureStatus | 1.3.6.1.4.1.2272.1.71.1.1.52 | INTEGER | read-only | Used to indicate the current temperature status |
| INT rcPlugOptModVoltageStatus | 1.3.6.1.4.1.2272.1.71.1.1.53 | INTEGER | read-only | Used to indicate the current voltage status |
| INT rcPlugOptModBiasStatus | 1.3.6.1.4.1.2272.1.71.1.1.54 | INTEGER | read-only | Used to indicate the current laser bias status |
| INT rcPlugOptModTxPowerStatus | 1.3.6.1.4.1.2272.1.71.1.1.55 | INTEGER | read-only | Used to indicate the current transmitter power status |
| INT rcPlugOptModRxPowerStatus | 1.3.6.1.4.1.2272.1.71.1.1.56 | INTEGER | read-only | Used to indicate the current receiver power status |
| INT rcPlugOptModAux1Status | 1.3.6.1.4.1.2272.1.71.1.1.57 | INTEGER | read-only | Used to indicate the current Aux1 status |
| INT rcPlugOptModAux2Status | 1.3.6.1.4.1.2272.1.71.1.1.58 | INTEGER | read-only | Used to indicate the current Aux2 status |
| rcPlugOptModScalars | 1.3.6.1.4.1.2272.1.71.2 | |||
| ENA rcPlugOptModDdmMonitor | 1.3.6.1.4.1.2272.1.71.2.1 | EnableValue | read-write | Enable/disable the global polling monitor for DDM |
| INT rcPlugOptModDdmMonitorInterval | 1.3.6.1.4.1.2272.1.71.2.2 | INTEGER | read-write | Indicate the interval in which the DDM alert registers is polled |
| ENA rcPlugOptModDdmTrapSend | 1.3.6.1.4.1.2272.1.71.2.3 | EnableValue | read-write | Enable/disable the global ddm trap send to SNMP manager |
| ENA rcPlugOptModDdmAlarmPortdown | 1.3.6.1.4.1.2272.1.71.2.4 | EnableValue | read-write | Enable/disable the global portdown option when ddm alarm occurs |
| rcVrrp | 1.3.6.1.4.1.2272.1.73 | |||
| rcVrrpMib | 1.3.6.1.4.1.2272.1.73.1 | |||
| rcVrrpObjects | 1.3.6.1.4.1.2272.1.73.1.1 | |||
| rcVrrpScalars | 1.3.6.1.4.1.2272.1.73.1.1.1 | |||
| T/F rcVrrpPingVirtualAddrEnable | 1.3.6.1.4.1.2272.1.73.1.1.1.1 | TruthValue | read-write | Used to configure whether this device should respond to pings directed to a virtual router's IP address. |
| INT rcVrrpTrapStateTransitionType | 1.3.6.1.4.1.2272.1.73.1.1.1.2 | INTEGER | read-only | Potential types of state transitions. Used by rcVrrpTrapStateTransition trap. |
| INT rcVrrpTrapStateTransitionCause | 1.3.6.1.4.1.2272.1.73.1.1.1.3 | INTEGER | read-only | Potential types of causes that will generate a rcVrrpTrapStateTransition trap. |
| rcVrrpOperTable | 1.3.6.1.4.1.2272.1.73.1.1.2 | not-accessible | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpOperEntry' items. | |
| rcVrrpOperEntry | 1.3.6.1.4.1.2272.1.73.1.1.2.1 | not-accessible | An entry in the rcVrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. | |
| NUM rcVrrpOperIfIndex | 1.3.6.1.4.1.2272.1.73.1.1.2.1.1 | InterfaceIndexOrZero | not-accessible | port interface index. |
| VRI rcVrrpOperVrId | 1.3.6.1.4.1.2272.1.73.1.1.2.1.2 | VrId | read-only | This object contains the Virtual Router Identifier (VRID). |
| IP rcVrrpOperIpAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.3 | IpAddress | read-write | The assigned IP addresses that a virtual router is responsible for backing up. |
| MAC rcVrrpOperVirtualMacAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.4 | MacAddress | read-only | The virtual MAC address of the virtual router. This is derived as follows: 00-00-5E-00-01-. Where the first three octets consist of the IANA's OUI; The next two octets indicate the address block of the VRRP protocol; and the remaining octets consist of the VRID. Although this object can be derived from the 'rcVrrpOperVrId' object, it is included here, for completeness, so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps. |
| INT rcVrrpOperState | 1.3.6.1.4.1.2272.1.73.1.1.2.1.5 | INTEGER | read-only | The current state of the virtual router. |
| INT rcVrrpOperControl | 1.3.6.1.4.1.2272.1.73.1.1.2.1.6 | INTEGER | read-write | This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backup'; Setting the value to 'disabled', will tranisition the router from 'master' or 'backup' to 'initialize'. |
| I32 rcVrrpOperPriority | 1.3.6.1.4.1.2272.1.73.1.1.2.1.7 | Integer32 | read-write | This object specifies the priority for the virtual router (e.g., master election) with respect to other virtual routers that are backing up a one or more associated IP addresses. Higher values imply higher priority. A priority of '0', although not settable, is used to indicate that this router has ceased to particpate in VRRP and a backup virtual router should transition \ to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). |
| I32 rcVrrpOperIpAddrCount | 1.3.6.1.4.1.2272.1.73.1.1.2.1.8 | Integer32 | read-only | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair. |
| IP rcVrrpOperMasterIpAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.9 | IpAddress | read-only | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router |
| INT rcVrrpOperAuthType | 1.3.6.1.4.1.2272.1.73.1.1.2.1.10 | INTEGER | read-write | Authentication type used for VRRP protocol exchanges between virtual routers. |
| OCT rcVrrpOperAuthKey | 1.3.6.1.4.1.2272.1.73.1.1.2.1.11 | OCTET STRING | read-write | The Authentication Key. If the virtual router's Authorization Type is 'simpleTextPassword', and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, rcVrrpOperAuthKey always returns an Octet String of length zero. |
| OCT rcVrrpOperHMACMD5Key | 1.3.6.1.4.1.2272.1.73.1.1.2.1.12 | OCTET STRING | read-write | The Authentication Key. If the virtual router's 'Authorization Type' is 'ipAuthenticationHeader', and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, rcVrrpOperHMACMD5Key always returns an Octet String of length zero. |
| I32 rcVrrpOperAdvertisementInterval | 1.3.6.1.4.1.2272.1.73.1.1.2.1.13 | Integer32 | read-write | This is the time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
| INT rcVrrpOperPreemptMode | 1.3.6.1.4.1.2272.1.73.1.1.2.1.14 | INTEGER | read-write | Controls whether a higher priority virtual router will preempt a lower priority master. |
| TIK rcVrrpOperVirtualRouterUpTime | 1.3.6.1.4.1.2272.1.73.1.1.2.1.15 | TimeTicks | read-only | This is the time interval (in hundredths of a second) since this virtual router was initialized. |
| ROW rcVrrpOperRowStatus | 1.3.6.1.4.1.2272.1.73.1.1.2.1.16 | RowStatus | read-write | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to 'createAndGo' results in enabling the VRRP protocol for this virtual router. The information required to actually create the conceptual row may be included in the SET primitive or may be initialized by the agent on the virtual router. Destroying the entry or setting it to 'notInService' disables VRRP on this virtual router. |
| IP rcVrrpOperCriticalIpAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.17 | IpAddress | read-write | IP address of the interface that will cause a shutdown event. |
| INT rcVrrpOperHoldDownTimer | 1.3.6.1.4.1.2272.1.73.1.1.2.1.18 | INTEGER | read-write | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| INT rcVrrpOperHoldDownState | 1.3.6.1.4.1.2272.1.73.1.1.2.1.19 | INTEGER | read-only | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. |
| INT rcVrrpOperHoldDownTimeRemaining | 1.3.6.1.4.1.2272.1.73.1.1.2.1.20 | INTEGER | read-only | Used to indicate the amount of time (in seconds) left before the rcVrrpOperHoldDownTimer will expire. |
| INT rcVrrpOperAction | 1.3.6.1.4.1.2272.1.73.1.1.2.1.21 | INTEGER | read-write | Used to trigger an action on this vrrp interface. |
| T/F rcVrrpOperCriticalIpAddrEnable | 1.3.6.1.4.1.2272.1.73.1.1.2.1.22 | TruthValue | read-write | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (0.0.0.0). No effect if an user-defined IP address does not exist. |
| INT rcVrrpOperBackUpMaster | 1.3.6.1.4.1.2272.1.73.1.1.2.1.23 | INTEGER | read-write | Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT. |
| INT rcVrrpOperBackUpMasterState | 1.3.6.1.4.1.2272.1.73.1.1.2.1.24 | INTEGER | read-only | Indicate whether backup VRRP switch traffic forwarding is enabled or not. |
| I32 rcVrrpOperFasterAdvInterval | 1.3.6.1.4.1.2272.1.73.1.1.2.1.25 | Integer32 | read-write | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of the regular advertisement interval |
| INT rcVrrpOperFasterAdvIntervalEnable | 1.3.6.1.4.1.2272.1.73.1.1.2.1.26 | INTEGER | read-write | Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. |
| rcVrrpRouterStatsTable | 1.3.6.1.4.1.2272.1.73.1.1.3 | not-accessible | Table of virtual router statistics. | |
| rcVrrpRouterStatsEntry | 1.3.6.1.4.1.2272.1.73.1.1.3.1 | not-accessible | An entry in the table, containing statistics information about a given virtual router. | |
| I32 rcVrrpStatsIfIndex | 1.3.6.1.4.1.2272.1.73.1.1.3.1.1 | Integer32 | read-only | port interface index. |
| VRI rcVrrpStatsVrId | 1.3.6.1.4.1.2272.1.73.1.1.3.1.2 | VrId | read-only | This object contains the Virtual Router Identifier (VRID). |
| C32 rcVrrpStatsBecomeMaster | 1.3.6.1.4.1.2272.1.73.1.1.3.1.3 | Counter32 | read-only | The total number of times that this virtual router's state has transitioned from BACKUP to MASTER. |
| C32 rcVrrpStatsAdvertiseRcvd | 1.3.6.1.4.1.2272.1.73.1.1.3.1.4 | Counter32 | read-only | The total number of VRRP advertisements received by this virtual router. |
| C32 rcVrrpStatsAdvertiseIntervalErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.5 | Counter32 | read-only | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. |
| C32 rcVrrpStatsPasswdSecurityViolations | 1.3.6.1.4.1.2272.1.73.1.1.3.1.6 | Counter32 | read-only | The total number of VRRP packets received that do not pass the simple text password authentification check. |
| C32 rcVrrpStatsHmacSecurityViolations | 1.3.6.1.4.1.2272.1.73.1.1.3.1.7 | Counter32 | read-only | The total number of VRRP packets received that do not pass the HMAC-MD5-96 authentification check. |
| C32 rcVrrpStatsIpTtlErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.8 | Counter32 | read-only | The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. |
| C32 rcVrrpStatsPriorityZeroPktsRcvd | 1.3.6.1.4.1.2272.1.73.1.1.3.1.9 | Counter32 | read-only | The total number of VRRP packets received by the virtual router with a priority of '0'. |
| C32 rcVrrpStatsPriorityZeroPktsSent | 1.3.6.1.4.1.2272.1.73.1.1.3.1.10 | Counter32 | read-only | The total number of VRRP packets sent by the virtual router with a priority of '0'. |
| C32 rcVrrpStatsInvalidTypePktsRcvd | 1.3.6.1.4.1.2272.1.73.1.1.3.1.11 | Counter32 | read-only | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. |
| C32 rcVrrpStatsAddressListErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.12 | Counter32 | read-only | Packets received address list the address list does not match the locally configured list for the virtual router. |
| C32 rcVrrpStatsUnknownAuthType | 1.3.6.1.4.1.2272.1.73.1.1.3.1.13 | Counter32 | read-only | Packets received with an unknown authentication type. |
| C32 rcVrrpStatsAuthTypeErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.14 | Counter32 | read-only | Packets received with 'Auth Type' not equal to the locally configured authentication method ('vrrpOperAuthType'). |
| rcVrrpNotifications | 1.3.6.1.4.1.2272.1.73.1.2 | |||
| NTF rcVrrpTrapStateTransition | 1.3.6.1.4.1.2272.1.73.1.2.1 | A rcVrrpTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | ||
| rcMpls | 1.3.6.1.4.1.2272.1.74 | |||
| rcMplsMib | 1.3.6.1.4.1.2272.1.74.1 | |||
| rcMplsNotifications | 1.3.6.1.4.1.2272.1.74.1.0 | |||
| rcMplsObjects | 1.3.6.1.4.1.2272.1.74.1.1 | |||
| rcMplsGlobalGroup | 1.3.6.1.4.1.2272.1.74.1.1.1 | |||
| rcMplsGlobalScalars | 1.3.6.1.4.1.2272.1.74.1.1.1.1 | |||
| IP rcMplsRouterId | 1.3.6.1.4.1.2272.1.74.1.1.1.1.1 | IpAddress | read-write | IP address of the circuitless interface to be used as router-id |
| ENA rcMplsLdpAdminStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.1.2 | EnableValue | read-write | State of global LDP - enabled or disabled |
| INT rcMplsLdpPenultimateHopPop | 1.3.6.1.4.1.2272.1.74.1.1.1.1.3 | INTEGER | read-write | State of global LDP Penultimate Hop Popping. |
| U32 rcMplsLdpHelloHoldTimer | 1.3.6.1.4.1.2272.1.74.1.1.1.1.4 | Unsigned32 | read-write | The global Hello Hold Time in seconds. |
| U32 rcMplsLdpSessionKeepAlive | 1.3.6.1.4.1.2272.1.74.1.1.1.1.5 | Unsigned32 | read-write | The global Session Keep alive in seconds. |
| I32 rcMplsLdpPathVectorLimit | 1.3.6.1.4.1.2272.1.74.1.1.1.1.6 | Integer32 | read-write | The global path vector limit. |
| I32 rcMplsLdpHopCountLimit | 1.3.6.1.4.1.2272.1.74.1.1.1.1.7 | Integer32 | read-write | The global loop detect hop count limit. |
| ENA rcMplsLdpEgressPolicyStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.1.8 | EnableValue | read-write | State of LDP Egress-policy enabled or disabled |
| ENA rcMplsRsvpAdminStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.1.9 | EnableValue | read-write | State of global RSVP - enabled or disabled |
| INT rcMplsRsvpPenultimateHopPop | 1.3.6.1.4.1.2272.1.74.1.1.1.1.10 | INTEGER | read-write | State of global RSVP Penultimate Hop Popping. |
| U32 rcMplsRsvpHelloInterval | 1.3.6.1.4.1.2272.1.74.1.1.1.1.11 | Unsigned32 | read-write | The global RSVP hello interval. |
| ENA rcMplsRsvpRefreshReduction | 1.3.6.1.4.1.2272.1.74.1.1.1.1.12 | EnableValue | read-write | State of global RSVP refresh reduction - enabled or disabled |
| U32 rcMplsRsvpRefreshInterval | 1.3.6.1.4.1.2272.1.74.1.1.1.1.13 | Unsigned32 | read-write | The global value for RSVP refresh interval. |
| U32 rcMplsRsvpRefreshMultiplier | 1.3.6.1.4.1.2272.1.74.1.1.1.1.14 | Unsigned32 | read-write | The global value for RSVP refresh multiplier. |
| ENA rcMplsRsvpMessageBundling | 1.3.6.1.4.1.2272.1.74.1.1.1.1.15 | EnableValue | read-write | State of global RSVP message bundling - enabled or disabled |
| I32 rcMplsLspIngressStartLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.1.16 | Integer32 | read-write | The global ingress rsp start label. |
| I32 rcMplsLspEgressStartLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.1.17 | Integer32 | read-write | The global egress rsp start label. |
| T/F rcMplsLspIngressPktEnable | 1.3.6.1.4.1.2272.1.74.1.1.1.1.18 | TruthValue | read-write | Enable/Disable ingress rsp pkt lsp stats |
| T/F rcMplsLspEgressPktEnable | 1.3.6.1.4.1.2272.1.74.1.1.1.1.19 | TruthValue | read-write | Enable/Disable egress rsp pkt lsp stats |
| T/F rcMplsLdpClearStats | 1.3.6.1.4.1.2272.1.74.1.1.1.1.20 | TruthValue | read-write | Clear global LDP Statistics. |
| T/F rcMplsRsvpClearStats | 1.3.6.1.4.1.2272.1.74.1.1.1.1.21 | TruthValue | read-write | Clear global RSVP Statistics. |
| INT rcMplsLspClearStats | 1.3.6.1.4.1.2272.1.74.1.1.1.1.22 | INTEGER | read-write | Clear 'transmit' or 'receive' lsp statistics. |
| rcMplsIpStaticFecTable | 1.3.6.1.4.1.2272.1.74.1.1.1.2 | not-accessible | This is the table of ip-static fec mappings for both RSVP and LDP . | |
| rcMplsIpStaticFecEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1 | not-accessible | A static fec mapping to an rsvp lsp or ldp egress IP address. | |
| IP rcMplsIpStaticFecDest | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.1 | IpAddress | not-accessible | The statically-configured destination IP address. |
| IP rcMplsIpStaticFecMask | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.2 | IpAddress | not-accessible | The statically-configured destination IP mask. |
| STR rcMplsIpStaticFecTunnelName | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.3 | DisplayString | read-create | The rsvp lsp tunnel name associated with rcMplsIpStaticFecTunnelId. This field will be null if the value of rcMplsIpStaticFecTunnelId is 0. |
| MPL rcMplsIpStaticFecTunnelId | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.4 | MplsTunnelIndex | read-create | The rsvp lsp tunnel index (from mplsTunnelTable defined in rfc3812) if this is an rsvp Ip statically mapped address. This field will be 0 if this is an LDP Egress Address mapping. |
| IP rcMplsIpStaticFecEgressAddr | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.5 | IpAddress | read-create | The LDP Egress IP Address. This field will be 0 if this is an rsvp tunnel fec mapping. |
| IP rcMplsIpStaticFecEgressMask | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.6 | IpAddress | read-create | The LDP Egress IP Mask. This field will be 0 if this is an rsvp tunnel fec mapping. |
| INT rcMplsIpStaticFecState | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.7 | INTEGER | read-only | Indicates the actual operational status of this static fec. |
| ROW rcMplsIpStaticFecRowStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.8 | RowStatus | read-create | This variable is used to create, modify, and/or delete a row in this table. |
| rcMplsIpFtnTable | 1.3.6.1.4.1.2272.1.74.1.1.1.3 | not-accessible | This is the table of mpls Ip FTN. | |
| rcMplsIpFtnEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1 | not-accessible | An mpls FTN entry . | |
| IP rcMplsIpFtnDest | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.1 | IpAddress | not-accessible | The FTN destination IP address. |
| IP rcMplsIpFtnMask | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.2 | IpAddress | not-accessible | The FTN destination IP mask. |
| INT rcMplsIpFtnType | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.3 | INTEGER | read-only | The FTN next hop label type. |
| MPL rcMplsIpFtnOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.4 | MplsLabel | read-only | The FTN outgoing label. |
| NUM rcMplsIpFtnOutIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.5 | InterfaceIndex | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| IP rcMplsIpFtnNextHop | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.6 | IpAddress | read-only | The FTN next hop Ip Address. |
| rcMplsIpIlmTable | 1.3.6.1.4.1.2272.1.74.1.1.1.4 | not-accessible | This is the table of mpls Incoming Label Mapping. | |
| rcMplsIpIlmEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1 | not-accessible | An mpls Incoming Label Map entry . | |
| MPL rcMplsIpIlmInLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.1 | MplsLabel | not-accessible | The Incoming Label. |
| NUM rcMplsIpIlmInIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.2 | InterfaceIndex | read-only | The index value which uniquely identifies the incoming interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| MPL rcMplsIpIlmOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.3 | MplsLabel | read-only | The Outgoing Label. |
| NUM rcMplsIpIlmOutIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.4 | InterfaceIndex | read-only | The index value which uniquely identifies the outgoing interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| IP rcMplsIpIlmNextHop | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.5 | IpAddress | read-only | The next hop Ip Address. |
| rcMplsIngressLspStatTable | 1.3.6.1.4.1.2272.1.74.1.1.1.5 | not-accessible | This is the table of mpls Incoming Label Stats. | |
| rcMplsIngressLspStatEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1 | not-accessible | An mpls Incoming Label Stat entry . | |
| INT rcMplsIngressLspPort | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.1 | INTEGER | not-accessible | The incoming port for the lsp. |
| MPL rcMplsIngressLspLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.2 | MplsLabel | not-accessible | The Incoming Lsp Label. |
| C64 rcMplsIngressLspPkts | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.3 | Counter64 | read-only | Count of incoming packets for the corresponding lsp and port. |
| rcMplsEgressLspStatTable | 1.3.6.1.4.1.2272.1.74.1.1.1.6 | not-accessible | This is the table of mpls OutGoing Label Stats. | |
| rcMplsEgressLspStatEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1 | not-accessible | An mpls OutGoing Label Stat entry . | |
| INT rcMplsEgressLspPort | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.1 | INTEGER | not-accessible | The OutGoing port for the lsp. |
| MPL rcMplsEgressLspLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.2 | MplsLabel | not-accessible | The OutGoing Lsp Label. |
| C64 rcMplsEgressLspPkts | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.3 | Counter64 | read-only | Count of outgoing packets for the corresponding lsp and port. |
| rcMplsRsvpGroup | 1.3.6.1.4.1.2272.1.74.1.1.2 | |||
| rcMplsRsvpSummaryGroup | 1.3.6.1.4.1.2272.1.74.1.1.2.1 | |||
| U32 rcMplsRsvpSummaryVersion | 1.3.6.1.4.1.2272.1.74.1.1.2.1.1 | Unsigned32 | read-only | This is the RSVP version number. |
| ENA rcMplsRsvpSummaryState | 1.3.6.1.4.1.2272.1.74.1.1.2.1.2 | EnableValue | read-only | This is the RSVP protocol state. |
| U32 rcMplsRsvpSummaryLSPRetryTimer | 1.3.6.1.4.1.2272.1.74.1.1.2.1.3 | Unsigned32 | read-only | This is the retry timer (secs) for the LSPs starting from this node, in case of failure. A value of zero means no retry on LSPs. |
| U32 rcMplsRsvpSummaryLSPRetryLimit | 1.3.6.1.4.1.2272.1.74.1.1.2.1.4 | Unsigned32 | read-only | This is the retry limit for the LSPs starting from this node. It indicates how many times an LSP is retried before giving up. A value of zero means try infinitely. |
| U32 rcMplsRsvpSummaryLSPDecayRate | 1.3.6.1.4.1.2272.1.74.1.1.2.1.5 | Unsigned32 | read-only | This is the decay rate (percent) for LSPs starting on this node. |
| INT rcMplsRsvpSummaryPHP | 1.3.6.1.4.1.2272.1.74.1.1.2.1.6 | INTEGER | read-only | This is the configured RSVP PHP support on this node. Possible values are implicit-null, explicit-null, or disabled. |
| rcMplsRsvpTunnelExtTable | 1.3.6.1.4.1.2272.1.74.1.1.2.2 | not-accessible | This is the table of mpls rsvp tunnels. This table supplements the mplsTunnelTable from rfc3812. | |
| rcMplsRsvpTunnelExtEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1 | not-accessible | An entry in the mpls tunnel table. | |
| MPL rcMplsRsvpTunnelExtIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.1 | MplsTunnelIndex | not-accessible | The Tunnel Index. The value of this object should mimic the value of mplsTunnelIndex of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| MPL rcMplsRsvpTunnelExtInstance | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.2 | MplsTunnelInstanceIndex | not-accessible | The Tunnel Instance. The value of this object should mimic the value of mplsTunnelInstance of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| MPL rcMplsRsvpTunnelExtIngressLSRId | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.3 | MplsExtendedTunnelId | not-accessible | The Rsvp Tunnel Ingress LSR Id. The value of this object should mimic the value of the mplsTunnelIngressLSRId of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| MPL rcMplsRsvpTunnelExtEgressLSRId | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.4 | MplsExtendedTunnelId | not-accessible | The Rsvp Tunnel Egress LSR Id. The value of this object should mimic the value of the mplsTunnelEgressLSRId of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| STR rcMplsRsvpTunnelExtName | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.5 | SnmpAdminString | read-write | The Name of the tunnel associated with this LSP. |
| T/F rcMplsRsvpTunnelExtSwitchover | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.6 | TruthValue | read-write | Switch this LSP from active status to inactive status or vice versa. |
| T/F rcMplsRsvpTunnelExtActiveStatus | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.7 | TruthValue | read-only | This is 'true' if this is the active LSP of the tunnel. |
| STR rcMplsRsvpTunnelExtResStyle | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.8 | SnmpAdminString | read-only | This is the reservation style of the tunnel. |
| MPL rcMplsRsvpTunnelExtLspId | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.9 | MplsLSPID | read-only | This is the LSP Id of this LSP. |
| STR rcMplsRsvpTunnelExtERO | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.10 | SnmpAdminString | read-only | This is the Explicit Route associated with this LSP. |
| STR rcMplsRsvpTunnelExtRRO | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.11 | SnmpAdminString | read-only | This is the Recorded Route associated with this LSP. |
| NUM rcMplsRsvpTunnelExtInIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.12 | InterfaceIndex | read-only | This is the incoming interface for the LSP. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| MPL rcMplsRsvpTunnelExtInLabel | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.13 | MplsLabel | read-only | This is the incoming Mpls Label. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| IP rcMplsRsvpTunnelExtInNeighbor | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.14 | IpAddress | read-only | This address of the previous-hop (upstream) router. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| NUM rcMplsRsvpTunnelExtOutIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.15 | InterfaceIndex | read-only | This is the outgoing interface for the LSP. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| MPL rcMplsRsvpTunnelExtOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.16 | MplsLabel | read-only | This is the outgoing Mpls Label. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| IP rcMplsRsvpTunnelExtOutNeighbor | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.17 | IpAddress | read-only | This address of the next-hop (downstream) router. This applies to rows with applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| U32 rcMplsRsvpTunnelExtTSpecRate | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.18 | Unsigned32 | read-only | This is the primary LSP TSpec Rate. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecSize | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.19 | Unsigned32 | read-only | This is the primary LSP TSpec Size. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecPeak | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.20 | Unsigned32 | read-only | This is the primary LSP TSpec Peak. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecMin | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.21 | Unsigned32 | read-only | This is the primary LSP TSpec Min. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecMax | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.22 | Unsigned32 | read-only | This is the primary lsp TSpec Max. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| TIK rcMplsRsvpTunnelExtInstanceUpTime | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.23 | TimeTicks | read-only | This is the time (in 100ths of a second) that this instance has been in the Oper 'Up' state. When the instance transitions out of the Oper 'Up' state the time is reset to zero. |
| TIK rcMplsRsvpTunnelExtLSPUpTime | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.24 | TimeTicks | read-only | This is the time (in 100ths of a second) that all instances of this LSP have been in the Oper Up state. The time is calculated based on the create time of the first instance of the LSP to go to the Oper 'Up' state. When all instances of this LSP have transitioned out of the Oper 'Up' state the time is reset to zero. |
| rcMplsRsvpNeighborTable | 1.3.6.1.4.1.2272.1.74.1.1.2.3 | not-accessible | This is the table of mpls rsvp neighbors. | |
| rcMplsRsvpNeighborEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1 | not-accessible | An entry in the mpls rsvp tunnel table. | |
| IP rcMplsRsvpNeighborAddress | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.1 | IpAddress | not-accessible | This is the address of a learned neighbor. |
| STR rcMplsRsvpNeighborHelloState | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.2 | SnmpAdminString | read-only | This is the state of hello exchange with the neighbor. |
| NUM rcMplsRsvpNeighborIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.3 | InterfaceIndex | read-only | This is the interface index of the neighbor. |
| I32 rcMplsRsvpNeighborTime | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.4 | Integer32 | read-only | This is the time the neighbor was learned. |
| I32 rcMplsRsvpNeighborPeriod | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.5 | Integer32 | read-only | This is the RSVP Hello Interval. |
| I32 rcMplsRsvpNeighborSendCnt | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.6 | Integer32 | read-only | This is the number of Hello packets sent to the neighbor. |
| I32 rcMplsRsvpNeighborRcvCnt | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.7 | Integer32 | read-only | This is the number of Hellp packets received from the neighbor. |
| I32 rcMplsRsvpNeighborLocalInstance | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.8 | Integer32 | read-only | This is the identification sent to the remote router during Hello message exchange. |
| I32 rcMplsRsvpNeighborRemoteInstance | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.9 | Integer32 | read-only | This is the identification provided by the remote router during Hello message exchange. |
| I32 rcMplsRsvpNeighborCreationTime | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.10 | Integer32 | read-only | This is the time the neighbor instance was created. |
| I32 rcMplsRsvpNeighborLastPktRxTime | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.11 | Integer32 | read-only | This is the time that the last Hello message was received from the remote router. |
| STR rcMplsRsvpNeighborRefReduction | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.12 | SnmpAdminString | read-only | This is the refresh-reduction status between the local router and the neighbor. |
| rcMplsRsvpInterfaceTable | 1.3.6.1.4.1.2272.1.74.1.1.2.4 | not-accessible | This is the table of mpls rsvp interfaces. | |
| rcMplsRsvpInterfaceEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1 | not-accessible | An entry in the mpls rsvp interface table. | |
| NUM rcMplsRsvpInterfaceIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.1 | InterfaceIndex | not-accessible | This is the interface index. |
| IP rcMplsRsvpInterfaceAddress | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.2 | IpAddress | read-only | This is the address of the interface. |
| U32 rcMplsRsvpInterfaceRefreshInterval | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.3 | Unsigned32 | read-only | This is the RSVP refresh interval for the interface(seconds). |
| U32 rcMplsRsvpInterfaceRefreshMult | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.4 | Unsigned32 | read-only | This is the configured RSVP refresh multiplier for the interface(seconds). |
| U32 rcMplsRsvpInterfaceHelloInterval | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.5 | Unsigned32 | read-only | This is the configured RSVP Hello Interval of the interface (seconds). |
| U32 rcMplsRsvpInterfaceRefreshReduction | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.6 | Unsigned32 | read-only | This is the configured RSVP refresh reduction support on the interface. |
| U32 rcMplsRsvpInterfaceMessageBundling | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.7 | Unsigned32 | read-only | This indicates state of message bundling on the interface. |
| rcMplsRsvpStatsTable | 1.3.6.1.4.1.2272.1.74.1.1.2.5 | not-accessible | This is the table of mpls rsvp statistics. | |
| rcMplsRsvpStatsEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1 | not-accessible | An entry in the mpls rsvp statistics table. | |
| NUM rcMplsRsvpStatsIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.1 | InterfaceIndex | not-accessible | This is the interface index. This value can be 0 or a valid interface index. When 0 the global rsvp statistics are retrieved. |
| C32 rcMplsRsvpStatsPathRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.2 | Counter32 | read-only | This is the path received count. |
| C32 rcMplsRsvpStatsPathSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.3 | Counter32 | read-only | This is the path sent count. |
| C32 rcMplsRsvpStatsPathErrRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.4 | Counter32 | read-only | This is the path error receives count. |
| C32 rcMplsRsvpStatsPathErrSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.5 | Counter32 | read-only | This is the path error sent count. |
| C32 rcMplsRsvpStatsPathTearRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.6 | Counter32 | read-only | This is the path tear receives count. |
| C32 rcMplsRsvpStatsPathTearSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.7 | Counter32 | read-only | This is the path tear sent count. |
| C32 rcMplsRsvpStatsResvRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.8 | Counter32 | read-only | This is the reservation received count. |
| C32 rcMplsRsvpStatsResvSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.9 | Counter32 | read-only | This is the reservation sent count. |
| C32 rcMplsRsvpStatsResvErrRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.10 | Counter32 | read-only | This is the reservation error receives count. |
| C32 rcMplsRsvpStatsResvErrSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.11 | Counter32 | read-only | This is the reservation error sent count. |
| C32 rcMplsRsvpStatsResvTearRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.12 | Counter32 | read-only | This is the resv tear receives count. |
| C32 rcMplsRsvpStatsResvTearSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.13 | Counter32 | read-only | This is the resv tear sent count. |
| C32 rcMplsRsvpStatsConfTearRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.14 | Counter32 | read-only | This is the conf tear receives count. |
| C32 rcMplsRsvpStatsConfTearSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.15 | Counter32 | read-only | This is the conf tear sent count. |
| C32 rcMplsRsvpStatsAckRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.16 | Counter32 | read-only | This is the acks receives count. |
| C32 rcMplsRsvpStatsAckSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.17 | Counter32 | read-only | This is the acks sent count. |
| C32 rcMplsRsvpStatsSRefreshRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.18 | Counter32 | read-only | This is the summary refresh receives count. |
| C32 rcMplsRsvpStatsSRefreshSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.19 | Counter32 | read-only | This is the summary refresh sent count. |
| C32 rcMplsRsvpStatsHelloReqRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.20 | Counter32 | read-only | This is the hello request receives count. |
| C32 rcMplsRsvpStatsHelloReqSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.21 | Counter32 | read-only | This is the hello request sent count. |
| C32 rcMplsRsvpStatsHelloAckRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.22 | Counter32 | read-only | This is the hello ack receives count. |
| C32 rcMplsRsvpStatsHelloAckSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.23 | Counter32 | read-only | This is the hello ack sent count. |
| C32 rcMplsRsvpStatsBadIpHdr | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.24 | Counter32 | read-only | This is the count of pkts with bad IP Header. |
| C32 rcMplsRsvpStatsBadVersion | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.25 | Counter32 | read-only | This is the count of pkts with Bad Version. |
| C32 rcMplsRsvpStatsBadRsvpLen | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.26 | Counter32 | read-only | This is the count of pkts with Bad Rsvp length. |
| C32 rcMplsRsvpStatsBadCksum | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.27 | Counter32 | read-only | This is the count of pkts with Bad Checksum. |
| C32 rcMplsRsvpStatsBadMsgType | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.28 | Counter32 | read-only | This is the count of pkts with Bad Message type. |
| C32 rcMplsRsvpStatsBadMsgForm | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.29 | Counter32 | read-only | This is the count of pkts with Bad Message Form. |
| C32 rcMplsRsvpStatsBadIntf | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.30 | Counter32 | read-only | This is the count of pkts received on a Bad Interface. |
| rcMplsLdpGroup | 1.3.6.1.4.1.2272.1.74.1.1.3 | |||
| rcMplsLdpSummaryGroup | 1.3.6.1.4.1.2272.1.74.1.1.3.1 | |||
| U32 rcMplsLdpSummaryIntAdjCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.1 | Unsigned32 | read-only | This is the LDP summary index. |
| U32 rcMplsLdpSummaryExtAdjCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.2 | Unsigned32 | read-only | This is the LDP summary index. |
| U32 rcMplsLdpSummarySessionCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.3 | Unsigned32 | read-only | This is the LDP summary session count. |
| U32 rcMplsLdpSummaryRouteCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.4 | Unsigned32 | read-only | This is the LDP summary route count. |
| OID rcMplsLdpSummaryLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.1.5 | MplsLdpIdentifier | read-only | This is the LDP summary Local LDP Id. |
| U32 rcMplsLdpSummaryLspCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.6 | Unsigned32 | read-only | This is the LDP summary LSP count. |
| U32 rcMplsLdpSummaryInSegCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.7 | Unsigned32 | read-only | This is the LDP summary in segment count. |
| U32 rcMplsLdpSummaryOutSegCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.8 | Unsigned32 | read-only | This is the LDP summary out segment count. |
| ENA rcMplsLdpSummaryRedistConn | 1.3.6.1.4.1.2272.1.74.1.1.3.1.9 | EnableValue | read-only | This is the LDP policy redist enable flag. |
| rcMplsLdpDiscoveryTable | 1.3.6.1.4.1.2272.1.74.1.1.3.2 | not-accessible | This is the table of mpls ldp discoveries. | |
| rcMplsLdpDiscoveryEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1 | not-accessible | An entry in the mpls ldp discovery table. | |
| NUM rcMplsLdpDiscoveryIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.1 | InterfaceIndex | not-accessible | This is the interface index. |
| OID rcMplsLdpDiscoveryPeerLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.2 | MplsLdpIdentifier | not-accessible | This is the peer ldp id. |
| IP rcMplsLdpDiscoveryPeerTransportAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.3 | IpAddress | read-only | This is the peer transport address to which an LDP session has been provisioned. |
| U32 rcMplsLdpDiscoveryNegotiatedHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.4 | Unsigned32 | read-only | This is the hold time negotiated between peers. |
| U32 rcMplsLdpDiscoveryConfSeqNum | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.5 | Unsigned32 | read-only | This is the configured sequence number sent by the peer. |
| U32 rcMplsLdpDiscoveryExtendedDiscovery | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.6 | Unsigned32 | read-only | If set to 1, extended discovery is enabled. If set to 0, basic discovery is enabled. |
| rcMplsLdpPathTable | 1.3.6.1.4.1.2272.1.74.1.1.3.3 | not-accessible | This is the table of mpls LDP Paths between a local peer and a remote peer. | |
| rcMplsLdpPathEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1 | not-accessible | An entry in the mpls ldp path table. | |
| INT rcMplsLdpPathType | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.1 | INTEGER | not-accessible | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. |
| IPt rcMplsLdpPathAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.2 | InetAddressType | not-accessible | This is the path address type. |
| ADR rcMplsLdpPathAddrPrefixLength | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.3 | InetAddressPrefixLength | not-accessible | This is the path address prefix length. |
| IP rcMplsLdpPathAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.4 | InetAddress | not-accessible | This is the path address. |
| MPL rcMplsLdpPathInLabel | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.5 | MplsLabel | read-only | This is the path address prefix length. |
| rcMplsLdpPathRemotePeerTable | 1.3.6.1.4.1.2272.1.74.1.1.3.4 | not-accessible | This is the table of LDP paths to a given remote peer. | |
| rcMplsLdpPathRemotePeerEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1 | not-accessible | An entry in the mpls ldp path remote peer table. | |
| INT rcMplsLdpPathRemotePeerType | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.1 | INTEGER | not-accessible | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. |
| IPt rcMplsLdpPathRemotePeerAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.2 | InetAddressType | not-accessible | This is the type of the path address. |
| ADR rcMplsLdpPathRemotePeerAddrPrefixLength | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.3 | InetAddressPrefixLength | not-accessible | This is the path address prefix length. |
| IP rcMplsLdpPathRemotePeerAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.4 | InetAddress | not-accessible | This is the path address. |
| INT rcMplsLdpPathRemotePeerId | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.5 | INTEGER | not-accessible | This is the Id of the remote peer of the path. |
| OID rcMplsLdpPathRemotePeerLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.6 | MplsLdpIdentifier | read-only | This is the LDP Id of the remote peer of the path. |
| MPL rcMplsLdpPathRemotePeerOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.7 | MplsLabel | read-only | This is the Out Label for this instance of the Remote Peer Id. |
| INT rcMplsLdpPathRemotePeerState | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.8 | INTEGER | read-only | This is the state of the remote peer. |
| rcMplsLdpRouteTable | 1.3.6.1.4.1.2272.1.74.1.1.3.5 | not-accessible | This is the table of mpls ldp routes. | |
| rcMplsLdpRouteEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1 | not-accessible | An entry in the mpls ldp route table. | |
| INT rcMplsLdpRouteType | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.1 | INTEGER | not-accessible | This is the route type. ---------------------- ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. |
| IPt rcMplsLdpRouteAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.2 | InetAddressType | not-accessible | This is the route address prefix length. |
| ADR rcMplsLdpRouteAddrPrefixLength | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.3 | InetAddressPrefixLength | not-accessible | This is the route address prefix length. |
| IP rcMplsLdpRouteAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.4 | InetAddress | not-accessible | This is the route address. |
| NUM rcMplsLdpRouteIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.5 | InterfaceIndex | read-only | This is the interface index of the route entry. |
| IPt rcMplsLdpRouteNextHopAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.6 | InetAddressType | read-only | This is the address type of the next hop. |
| IP rcMplsLdpRouteNextHopAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.7 | InetAddress | read-only | This is the address of the next hop. |
| rcMplsLdpSessionTable | 1.3.6.1.4.1.2272.1.74.1.1.3.6 | not-accessible | This is the table of mpls ldp sessions. | |
| rcMplsLdpSessionEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1 | not-accessible | An entry in the mpls ldp session table. | |
| OID rcMplsLdpSessionEntityLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.1 | MplsLdpIdentifier | not-accessible | This is the entity LDP ID for the session. |
| NUM rcMplsLdpSessionEntityIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.2 | IndexInteger | not-accessible | This is the entity LDP ID for the session. |
| OID rcMplsLdpSessionPeerLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.3 | MplsLdpIdentifier | not-accessible | This is the peer LDP ID for the session. |
| U32 rcMplsLdpSessionStateLastChange | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.4 | Unsigned32 | read-only | The time this Session entered its current state as denoted by the rcMplsLdpSessionState object. |
| INT rcMplsLdpSessionState | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.5 | INTEGER | read-only | The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior 1- nonexistent, 2- initialized, 3- openrec, 4- opensent, 5- operational. |
| INT rcMplsLdpSessionRole | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.6 | INTEGER | read-only | During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/LER was behaving in an active role or passive role during this session's establishment, 1- unknown, 2- active, 3- passive. The value of unknown(1), indicates that the role is not able to be determined at the present time. |
| U32 rcMplsLdpSessionProtocolVersion | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.7 | Unsigned32 | read-only | This is the protocol version. |
| I32 rcMplsLdpSessionKeepAliveHoldTimeRem | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.8 | Integer32 | read-only | This is the session keep alive hold time remaining. |
| U32 rcMplsLdpSessionKeepAliveTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.9 | Unsigned32 | read-only | This is the session keep alive time. |
| U32 rcMplsLdpSessionMaxPduLength | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.10 | Unsigned32 | read-only | This is the session's max pdu length. |
| I32 rcMplsLdpSessionDiscontinuityTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.11 | Integer32 | read-only | This is the session's discontinuity time. |
| U32 rcMplsLdpSessionHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12 | Unsigned32 | read-only | This is the session's hold time. |
| I32 rcMplsLdpSessionUpTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.13 | Integer32 | read-only | This is the session's up time. |
| C32 rcMplsLdpSessionMessagesSent | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.14 | Counter32 | read-only | This is the session total messages sent. |
| C32 rcMplsLdpSessionMessagesRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.15 | Counter32 | read-only | This is the session total messages received. |
| rcMplsLdpInterfaceTable | 1.3.6.1.4.1.2272.1.74.1.1.3.7 | not-accessible | This is the table of mpls ldp interface. | |
| rcMplsLdpInterfaceEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1 | not-accessible | An entry in the mpls ldp interface table. | |
| NUM rcMplsLdpInterfaceIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.1 | InterfaceIndex | not-accessible | This is the LDP interface if index. |
| U32 rcMplsLdpInterfaceNbrCount | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.2 | Unsigned32 | read-only | This is the number of neighbors. |
| U32 rcMplsLdpInterfaceNextHello | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.3 | Unsigned32 | read-only | This is the next hello time. |
| U32 rcMplsLdpInterfaceConfHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4 | Unsigned32 | read-only | This is the configured hello hold time. |
| U32 rcMplsLdpInterfaceNegHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.5 | Unsigned32 | read-only | This is the negotiated hello hold time. |
| U32 rcMplsLdpInterfaceHelloInterval | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.6 | Unsigned32 | read-only | This is one third of the negotiated hello hold time. |
| rcMplsLdpStatsTable | 1.3.6.1.4.1.2272.1.74.1.1.3.8 | not-accessible | This is the table of mpls ldp statistics. | |
| rcMplsLdpStatsEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1 | not-accessible | An entry in the mpls ldp statistics table. | |
| IP rcMplsLdpStatsPeerAddress | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.1 | IpAddress | not-accessible | This is the LDP Peer Address key for search. This value can be a valid peer address or 0.0.0.0. If 0.0.0.0 then global LDP statistics are retrieved. |
| C32 rcMplsLdpStatsNotifyRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.2 | Counter32 | read-only | This is the count of notifications received. |
| C32 rcMplsLdpStatsNotifySent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.3 | Counter32 | read-only | This is the count of notifications sent. |
| C32 rcMplsLdpStatsHelloRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.4 | Counter32 | read-only | This is the count of hellos received. |
| C32 rcMplsLdpStatsHelloSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.5 | Counter32 | read-only | This is the count of hellos sent. |
| C32 rcMplsLdpStatsInitRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.6 | Counter32 | read-only | This is the count of initializations received. |
| C32 rcMplsLdpStatsInitSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.7 | Counter32 | read-only | This is the count of initializations sent. |
| C32 rcMplsLdpStatsKeepRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.8 | Counter32 | read-only | This is the count of keep alives received. |
| C32 rcMplsLdpStatsKeepSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.9 | Counter32 | read-only | This is the count of keep alives sent. |
| C32 rcMplsLdpStatsAddrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.10 | Counter32 | read-only | This is the count of addrs received. |
| C32 rcMplsLdpStatsAddrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.11 | Counter32 | read-only | This is the count of addrs sent. |
| C32 rcMplsLdpStatsAddrWdrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.12 | Counter32 | read-only | This is the count of addr withdraws received. |
| C32 rcMplsLdpStatsAddrWdrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.13 | Counter32 | read-only | This is the count of addr withdraws sent. |
| C32 rcMplsLdpStatsLabelMapRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.14 | Counter32 | read-only | This is the count of label maps received. |
| C32 rcMplsLdpStatsLabelMapSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.15 | Counter32 | read-only | This is the count of label maps sent. |
| C32 rcMplsLdpStatsLabelReqRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.16 | Counter32 | read-only | This is the count of label reqs received. |
| C32 rcMplsLdpStatsLabelReqSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.17 | Counter32 | read-only | This is the count of label reqs sent. |
| C32 rcMplsLdpStatsLabelWdrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.18 | Counter32 | read-only | This is the count of label withdraws received. |
| C32 rcMplsLdpStatsLabelWdrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.19 | Counter32 | read-only | This is the count of label withdraws sent. |
| C32 rcMplsLdpStatsLabelRelRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.20 | Counter32 | read-only | This is the count of label withdraws received. |
| C32 rcMplsLdpStatsLabelRelSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.21 | Counter32 | read-only | This is the count of label withdraws sent. |
| C32 rcMplsLdpStatsLabelAbrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.22 | Counter32 | read-only | This is the count of label aborts received. |
| C32 rcMplsLdpStatsLabelAbrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.23 | Counter32 | read-only | This is the count of label aborts sent. |
| C32 rcMplsLdpStatsSessionUp | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.24 | Counter32 | read-only | This is the count of session up. |
| C32 rcMplsLdpStatsSessionDown | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.25 | Counter32 | read-only | This is the count of session down. |
| C32 rcMplsLdpStatsBadLdpIdentifierErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.26 | Counter32 | read-only | This is the count of bad LDP ID errors. |
| C32 rcMplsLdpStatsBadPduLengthErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.27 | Counter32 | read-only | This is the count of Bad PDU length errors. |
| C32 rcMplsLdpStatsBadMessageLengthErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.28 | Counter32 | read-only | This is the count of bad message length errors. |
| C32 rcMplsLdpStatsUnknownMessageErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.29 | Counter32 | read-only | This is the count of unknown message errors. |
| C32 rcMplsLdpStatsUnknownTlvErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.30 | Counter32 | read-only | This is the count of unknown TLV errors. |
| C32 rcMplsLdpStatsBadTlvLengthErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.31 | Counter32 | read-only | This is the count of bad TLV Length errors. |
| C32 rcMplsLdpStatsMalformedTlvValueErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.32 | Counter32 | read-only | This is the count of Malinformed TLV value errors. |
| C32 rcMplsLdpStatsHoldTimerExpErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.33 | Counter32 | read-only | This is the count of hold time expired errors. |
| C32 rcMplsLdpStatsSessionRejectedNoHelloErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.34 | Counter32 | read-only | This is the count of session reject - no hello errors. |
| C32 rcMplsLdpStatsSessionRejectedBadParmAdvErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.35 | Counter32 | read-only | This is the count of session reject - bad parameter advertisement errors. |
| C32 rcMplsLdpStatsSessionRejectedMaxPduErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.36 | Counter32 | read-only | This is the count of session reject - Max PDU Errors. |
| C32 rcMplsLdpStatsSessionRejectedBadLabelRangeErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.37 | Counter32 | read-only | This is the count of session reject - Bad Label Range errors. |
| C32 rcMplsLdpStatsSessionRejectedSetupAbortErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.38 | Counter32 | read-only | This is the count of session reject - Setup Abort errors. |
| C32 rcMplsLdpStatsSessionRejectedBadKeepaliveErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.39 | Counter32 | read-only | This is the count of session reject - Bad Keepalive Errors. |
| C32 rcMplsLdpStatsSessionOtherErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.40 | Counter32 | read-only | This is the count of other errors. |
| rcMplsNotificationObjects | 1.3.6.1.4.1.2272.1.74.1.2 | |||
| T/F rcMplsLdpStatusNotificationEnable | 1.3.6.1.4.1.2272.1.74.1.2.1 | TruthValue | read-write | If this object is true, then it enables the generation of LDP Session Up or Down Traps, otherwise these traps are not emitted. |
| T/F rcMplsLdpSessionThresholdNotificationEnable | 1.3.6.1.4.1.2272.1.74.1.2.2 | TruthValue | read-write | If this object is true, then it enables the generation of LDP Session Threshold Exceeded Traps, otherwise these traps are not emitted. |
| T/F rcMplsLdpPathVectorLimitNotificationEnable | 1.3.6.1.4.1.2272.1.74.1.2.3 | TruthValue | read-write | If this object is true, then it enables the generation of LDP Path Vector Limit Exceeded Traps, otherwise these traps are not emitted. |
| rcIpMRoute | 1.3.6.1.4.1.2272.1.76 | |||
| rcIpMRouteMIBObjects | 1.3.6.1.4.1.2272.1.76.1 | |||
| rcIpMRouteScalars | 1.3.6.1.4.1.2272.1.76.1.1 | |||
| T/F rcIpMRouteStatsEnabled | 1.3.6.1.4.1.2272.1.76.1.1.2 | TruthValue | read-write | The enabled status of IP Multicast statistics. |
| T/F rcIpMRouteStatsClear | 1.3.6.1.4.1.2272.1.76.1.1.3 | TruthValue | read-write | Clear ip mroute stats. |
| rcIpMRouteStatsTable | 1.3.6.1.4.1.2272.1.76.1.6 | not-accessible | the table containing IP Multicast statistics. | |
| rcIpMRouteStatsEntry | 1.3.6.1.4.1.2272.1.76.1.6.1 | not-accessible | An entry containing the ip multicast statistics information for the specific group ip address. | |
| IP rcIpMRouteStatsGroupAddress | 1.3.6.1.4.1.2272.1.76.1.6.1.1 | IpAddress | not-accessible | the IP multicast group address for which this entry contains ip multicast statistics. |
| C32 rcIpMRouteStatsSourceCount | 1.3.6.1.4.1.2272.1.76.1.6.1.2 | Counter32 | read-only | The number of sources corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsPkts | 1.3.6.1.4.1.2272.1.76.1.6.1.3 | Counter64 | read-only | The total number of frames that are processed corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsBytes | 1.3.6.1.4.1.2272.1.76.1.6.1.4 | Counter64 | read-only | The total number of bytes that are processed corresponding to the specific group and vrf. |
| I32 rcIpMRouteStatsAverageSizePerPkt | 1.3.6.1.4.1.2272.1.76.1.6.1.5 | Integer32 | read-only | The average length of packets that are processed corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsDropPkts | 1.3.6.1.4.1.2272.1.76.1.6.1.6 | Counter64 | read-only | The total number of drop frames that are processed corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsDropBytes | 1.3.6.1.4.1.2272.1.76.1.6.1.7 | Counter64 | read-only | The total number of drop bytes that are processed corresponding to the specific group and vrf. |
| I32 rcIpMRouteStatsPktsPerSecond | 1.3.6.1.4.1.2272.1.76.1.6.1.8 | Integer32 | read-only | The number of packets that are processed corresponding to the specific group and vrf in one second. |
| rcPlsb | 1.3.6.1.4.1.2272.1.78 | |||
| rcPlsbGlobal | 1.3.6.1.4.1.2272.1.78.1 | |||
| OCT rcPlsbGlobalVlans | 1.3.6.1.4.1.2272.1.78.1.1 | OCTET STRING | read-write | PLSB vlan entry. |
| ENA rcPlsbGlobalEnable | 1.3.6.1.4.1.2272.1.78.1.2 | EnableValue | read-write | Enable/Disable PLSB global flag. |
| INT rcPlsbGlobalMsti | 1.3.6.1.4.1.2272.1.78.1.3 | INTEGER | read-write | MSTI instance ID for PLSB VLANS |
| I32 rcPlsbGlobalEtherType | 1.3.6.1.4.1.2272.1.78.1.4 | Integer32 | read-write | SPBM Ethertype |
| rcKhi | 1.3.6.1.4.1.2272.1.85 | |||
| rcKhiConfig | 1.3.6.1.4.1.2272.1.85.1 | |||
| T/F rcKhiConfigKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.1 | TruthValue | read-write | Key Health Inidaction, this object is used turn off the KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| U32 rcKhiConfigKhiBootDelay | 1.3.6.1.4.1.2272.1.85.1.2 | Unsigned32 | read-write | Time interval from system up and running to start the KHI feature. Set to 0 to disable to the time interval. |
| BIT rcKhiConfigClearAction | 1.3.6.1.4.1.2272.1.85.1.3 | Bits | read-write | Clear action with bits set. 0 Bit means from left (most significant) bit to right (least significant) bit. |
| T/F rcKhiConfigPortKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.4 | TruthValue | read-write | Key Health Indication, this object is used to turn off the Port KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1) |
| T/F rcKhiConfigPerfKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.5 | TruthValue | read-write | Key Health Indication, this object is used to turn off the Performance KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1) |
| T/F rcKhiConfigChasKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.6 | TruthValue | read-write | Key Health Inidcation, this object is used to turn off the Chassis KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| T/F rcKhiConfigForwardingKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.7 | TruthValue | read-write | Key Health Indication, this object is used to turn off the Forwarding KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1) |
| INT rcKhiConfigForwardingClearSlot | 1.3.6.1.4.1.2272.1.85.1.9 | INTEGER | read-write | Clear KHI Forwarding stats for a particular Slot |
| rcKhiSlot | 1.3.6.1.4.1.2272.1.85.10 | |||
| rcKhiSlotPerfTable | 1.3.6.1.4.1.2272.1.85.10.1 | not-accessible | Slot Performance Information | |
| rcKhiSlotPerfEntry | 1.3.6.1.4.1.2272.1.85.10.1.1 | not-accessible | Slot Performance Entry | |
| I32 rcKhiSlotIndex | 1.3.6.1.4.1.2272.1.85.10.1.1.1 | Integer32 | not-accessible | An unique index used to identify the slot |
| I32 rcKhiSlotCpuCurrentUtil | 1.3.6.1.4.1.2272.1.85.10.1.1.2 | Integer32 | read-only | Percentage CPU utilization under current operating conditions. Value is in tenth's of a percent. |
| INT rcKhiSlotCpu5MinAve | 1.3.6.1.4.1.2272.1.85.10.1.1.3 | INTEGER | read-only | Average percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| INT rcKhiSlotCpu5MinHi | 1.3.6.1.4.1.2272.1.85.10.1.1.4 | INTEGER | read-only | Hi watermark for percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| DAT rcKhiSlotCpu5MinHiTime | 1.3.6.1.4.1.2272.1.85.10.1.1.5 | DateAndTime | read-only | Last time at which sampling occured. |
| I32 rcKhiSlotMemUsed | 1.3.6.1.4.1.2272.1.85.10.1.1.6 | Integer32 | read-only | The amount of DRAM memory consumed in KB. |
| I32 rcKhiSlotMemFree | 1.3.6.1.4.1.2272.1.85.10.1.1.7 | Integer32 | read-only | The amount of DRAM memory available in KB. |
| I32 rcKhiSlotMemUtil | 1.3.6.1.4.1.2272.1.85.10.1.1.8 | Integer32 | read-only | Current percentage of memory utilization. |
| I32 rcKhiSlotMem5MinAve | 1.3.6.1.4.1.2272.1.85.10.1.1.9 | Integer32 | read-only | Average percentage of memory utilization over the past 5 minutes. |
| I32 rcKhiSlotMem5MinHi | 1.3.6.1.4.1.2272.1.85.10.1.1.10 | Integer32 | read-only | High watermark for percentage memory utilization over the past 5 minutes. |
| DAT rcKhiSlotMem5MinHiTime | 1.3.6.1.4.1.2272.1.85.10.1.1.11 | DateAndTime | read-only | The last time memory information was registered. |
| I32 rcKhiSlotUsedFbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.12 | Integer32 | read-only | The number of Fbufs in use. |
| I32 rcKhiSlotFreeFbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.13 | Integer32 | read-only | The number of Fbufs available. |
| I32 rcKhiSlotNoFbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.14 | Integer32 | read-only | The number of times when running out of Fbuff |
| I32 rcKhiSlotNetStackSysFreeMbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.15 | Integer32 | read-only | The number of network stack system Mbufs available. |
| I32 rcKhiSlotNetStackDataFreeMbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.16 | Integer32 | read-only | The number of network stack data Mbufs available. |
| I32 rcKhiSlotNetStackSysUsedMbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.17 | Integer32 | read-only | The number of network stack system Mbufs in use. |
| I32 rcKhiSlotNetStackDataUsedMbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.18 | Integer32 | read-only | The number of network stack data Mbufs in use. |
| I32 rcKhiSlotNetStackSysSocketMbuf | 1.3.6.1.4.1.2272.1.85.10.1.1.19 | Integer32 | read-only | The number of network stack system sockets. |
| I32 rcKhiSlotQHigh | 1.3.6.1.4.1.2272.1.85.10.1.1.20 | Integer32 | read-only | The highest number of queue entries consumed for system messaging. |
| I32 rcKhiSlotQNormal | 1.3.6.1.4.1.2272.1.85.10.1.1.21 | Integer32 | read-only | The current number of queue entries consumed for system messaging. |
| I32 rcKhiSlotFreeQEntries | 1.3.6.1.4.1.2272.1.85.10.1.1.22 | Integer32 | read-only | The current available number of queue entries for system messaging. |
| rcKhiSlotProcessTable | 1.3.6.1.4.1.2272.1.85.10.2 | not-accessible | CP Process Information | |
| rcKhiSlotProcessEntry | 1.3.6.1.4.1.2272.1.85.10.2.1 | not-accessible | Slot Process Entry | |
| I32 rcKhiSlotProcessId | 1.3.6.1.4.1.2272.1.85.10.2.1.1 | Integer32 | not-accessible | Process ID |
| I32 rcKhiSlotProcessParentId | 1.3.6.1.4.1.2272.1.85.10.2.1.2 | Integer32 | read-only | Parent Process ID |
| STR rcKhiSlotProcessName | 1.3.6.1.4.1.2272.1.85.10.2.1.3 | DisplayString | read-only | Name of the process running |
| I32 rcKhiSlotProcessVmSize | 1.3.6.1.4.1.2272.1.85.10.2.1.4 | Integer32 | read-only | The size of the virtual memory allocated to the process |
| I32 rcKhiSlotProcessVmLck | 1.3.6.1.4.1.2272.1.85.10.2.1.5 | Integer32 | read-only | The amount of locked memory |
| I32 rcKhiSlotProcessVmRss | 1.3.6.1.4.1.2272.1.85.10.2.1.6 | Integer32 | read-only | The amount of memory mapped in RAM ( instead of swapped out) |
| I32 rcKhiSlotProcessVmData | 1.3.6.1.4.1.2272.1.85.10.2.1.7 | Integer32 | read-only | The size of the Data segment |
| I32 rcKhiSlotProcessVmStk | 1.3.6.1.4.1.2272.1.85.10.2.1.8 | Integer32 | read-only | The stack size |
| I32 rcKhiSlotProcessVmExe | 1.3.6.1.4.1.2272.1.85.10.2.1.9 | Integer32 | read-only | The size of the executable segment |
| I32 rcKhiSlotProcessVmLib | 1.3.6.1.4.1.2272.1.85.10.2.1.10 | Integer32 | read-only | The size of the library code |
| rcKhiSlotPThreadTable | 1.3.6.1.4.1.2272.1.85.10.3 | not-accessible | Slot pthread information | |
| rcKhiSlotPThreadEntry | 1.3.6.1.4.1.2272.1.85.10.3.1 | not-accessible | Slot pthread entry | |
| I32 rcKhiSlotPThreadTaskId | 1.3.6.1.4.1.2272.1.85.10.3.1.1 | Integer32 | not-accessible | Task ID |
| STR rcKhiSlotPThreadName | 1.3.6.1.4.1.2272.1.85.10.3.1.2 | DisplayString | read-only | Name of the process running |
| I32 rcKhiSlotPThreadCpuCurrentUtil | 1.3.6.1.4.1.2272.1.85.10.3.1.3 | Integer32 | read-only | Percentage CPU utilization under current operating conditions. Value is in tenth's of a percent. |
| I32 rcKhiSlotPThreadCpu5MinAve | 1.3.6.1.4.1.2272.1.85.10.3.1.4 | Integer32 | read-only | Average percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| I32 rcKhiSlotPThreadCpu5MinHi | 1.3.6.1.4.1.2272.1.85.10.3.1.5 | Integer32 | read-only | Hi watermark for percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| DAT rcKhiSlotPthread5MinHiTime | 1.3.6.1.4.1.2272.1.85.10.3.1.6 | DateAndTime | read-only | Last time at which sampling occured. |
| rcKhiForwardingCb | 1.3.6.1.4.1.2272.1.85.11 | |||
| rcKhiForwardingCbIfTable | 1.3.6.1.4.1.2272.1.85.11.1 | not-accessible | Forwarding Interface Key Health Indicator MIB - All Cobalt Blue Data. | |
| rcKhiForwardingCbIfEntry | 1.3.6.1.4.1.2272.1.85.11.1.1 | not-accessible | Forwarding Interface KHI - Cobalt Blue table entry. | |
| NUM rcKhiForwardingCbIfIndex | 1.3.6.1.4.1.2272.1.85.11.1.1.1 | InterfaceIndex | not-accessible | Interface index for CB's KHI Forwarding data. Indicies are essentially port based. |
| C64 rcKhiForwardingCbIfRxOk | 1.3.6.1.4.1.2272.1.85.11.1.1.2 | Counter64 | read-only | Receieve OK Packets |
| C64 rcKhiForwardingCbIfTxOk | 1.3.6.1.4.1.2272.1.85.11.1.1.3 | Counter64 | read-only | Transmit OK Packets |
| C64 rcKhiForwardingCbIfRxErr | 1.3.6.1.4.1.2272.1.85.11.1.1.4 | Counter64 | read-only | Receive Error Packets |
| C64 rcKhiForwardingCbIfTxErr | 1.3.6.1.4.1.2272.1.85.11.1.1.5 | Counter64 | read-only | Transmit Error Packets |
| C64 rcKhiForwardingCbIfRdbgc0 | 1.3.6.1.4.1.2272.1.85.11.1.1.6 | Counter64 | read-only | RDBGC0 Packets |
| C64 rcKhiForwardingCbIfRdbgc0Mask | 1.3.6.1.4.1.2272.1.85.11.1.1.7 | Counter64 | read-only | RDBGC0 Mask |
| C64 rcKhiForwardingCbIfTdbgc0 | 1.3.6.1.4.1.2272.1.85.11.1.1.8 | Counter64 | read-only | TDBGC0 Packets |
| C64 rcKhiForwardingCbIfTdbgc0Mask | 1.3.6.1.4.1.2272.1.85.11.1.1.9 | Counter64 | read-only | TDBGC0 Mask |
| C64 rcKhiForwardingCbIfK2IpmcDrops | 1.3.6.1.4.1.2272.1.85.11.1.1.10 | Counter64 | read-only | IP Multicast Drops |
| rcKhiForwardingCbMachigigTable | 1.3.6.1.4.1.2272.1.85.11.2 | not-accessible | Forwarding Mac-Higig Key Health Indicator MIB - All Cobalt Blue Data. | |
| rcKhiForwardingCbMachigigEntry | 1.3.6.1.4.1.2272.1.85.11.2.1 | not-accessible | Forwarding Mac-Higig KHI - Cobalt Blue table entry. | |
| INT rcKhiForwardingCbMachigigIndex | 1.3.6.1.4.1.2272.1.85.11.2.1.1 | INTEGER | not-accessible | Index for CB's Forwarding MAc-Higig Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used. |
| C64 rcKhiForwardingCbMachigigMacK2 | 1.3.6.1.4.1.2272.1.85.11.2.1.2 | Counter64 | read-only | |
| C64 rcKhiForwardingCbMachigigMacK2Mac | 1.3.6.1.4.1.2272.1.85.11.2.1.3 | Counter64 | read-only | |
| C64 rcKhiForwardingCbMachigigRDGBC0 | 1.3.6.1.4.1.2272.1.85.11.2.1.4 | Counter64 | read-only | |
| C64 rcKhiForwardingCbMachigigRDGBC0mask | 1.3.6.1.4.1.2272.1.85.11.2.1.5 | Counter64 | read-only | |
| C64 rcKhiForwardingCbMachigigTDGBC0 | 1.3.6.1.4.1.2272.1.85.11.2.1.6 | Counter64 | read-only | |
| C64 rcKhiForwardingCbMachigigTDGBC0mask | 1.3.6.1.4.1.2272.1.85.11.2.1.7 | Counter64 | read-only | |
| C64 rcKhiForwardingCbMachigigIFPDOSDrops | 1.3.6.1.4.1.2272.1.85.11.2.1.8 | Counter64 | read-only | |
| rcKhiForwardingCbK2Table | 1.3.6.1.4.1.2272.1.85.11.3 | not-accessible | Forwarding K2 Key Health Indicator MIB - All Cobalt Blue Data. | |
| rcKhiForwardingCbK2Entry | 1.3.6.1.4.1.2272.1.85.11.3.1 | not-accessible | Forwarding K2 KHI - Cobalt Blue table entry. | |
| INT rcKhiForwardingCbK2Index | 1.3.6.1.4.1.2272.1.85.11.3.1.1 | INTEGER | not-accessible | Index for CB's Forwarding K2 Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used. |
| C64 rcKhiForwardingCbK2MacK2 | 1.3.6.1.4.1.2272.1.85.11.3.1.2 | Counter64 | read-only | |
| C64 rcKhiForwardingCbK2Zagros | 1.3.6.1.4.1.2272.1.85.11.3.1.3 | Counter64 | read-only | |
| C64 rcKhiForwardingCbK2ZagrosK2 | 1.3.6.1.4.1.2272.1.85.11.3.1.4 | Counter64 | read-only | |
| C64 rcKhiForwardingCbK2Mac | 1.3.6.1.4.1.2272.1.85.11.3.1.5 | Counter64 | read-only | |
| C64 rcKhiForwardingCbK2MacK2Err | 1.3.6.1.4.1.2272.1.85.11.3.1.6 | Counter64 | read-only | |
| C64 rcKhiForwardingCbK2ZagrosErr | 1.3.6.1.4.1.2272.1.85.11.3.1.7 | Counter64 | read-only | |
| C64 rcKhiForwardingCbK2ZagrosK2Err | 1.3.6.1.4.1.2272.1.85.11.3.1.8 | Counter64 | read-only | |
| C64 rcKhiForwardingCbK2MacErr | 1.3.6.1.4.1.2272.1.85.11.3.1.9 | Counter64 | read-only | |
| rcKhiForwardingCbZagrosTable | 1.3.6.1.4.1.2272.1.85.11.4 | not-accessible | Zagros Forwarding Zagros Key Health Indicator MIB - All Cobalt Blue Data. | |
| rcKhiForwardingCbZagrosEntry | 1.3.6.1.4.1.2272.1.85.11.4.1 | not-accessible | Zagros Forwarding KHI - Cobalt Blue table entry. | |
| INT rcKhiForwardingCbZagrosIndex | 1.3.6.1.4.1.2272.1.85.11.4.1.1 | INTEGER | not-accessible | Index for CB's Forwarding Zagros Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used. |
| C64 rcKhiForwardingCbZagrosK2Zagros | 1.3.6.1.4.1.2272.1.85.11.4.1.2 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosRsp | 1.3.6.1.4.1.2272.1.85.11.4.1.3 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosQe | 1.3.6.1.4.1.2272.1.85.11.4.1.4 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosQeZagros | 1.3.6.1.4.1.2272.1.85.11.4.1.5 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosK2 | 1.3.6.1.4.1.2272.1.85.11.4.1.6 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPoolLo | 1.3.6.1.4.1.2272.1.85.11.4.1.7 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPoolHigh | 1.3.6.1.4.1.2272.1.85.11.4.1.8 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmRspDropCounters | 1.3.6.1.4.1.2272.1.85.11.4.1.9 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmoutputDropCount | 1.3.6.1.4.1.2272.1.85.11.4.1.10 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmAdmissionRspDropCount | 1.3.6.1.4.1.2272.1.85.11.4.1.11 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmAdmissionErrDropCount | 1.3.6.1.4.1.2272.1.85.11.4.1.12 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool1Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.13 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool2Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.14 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool3Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.15 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool4Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.16 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool5Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.17 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool6Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.18 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool7Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.19 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool8Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.20 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool9Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.21 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPmmPool10Drop | 1.3.6.1.4.1.2272.1.85.11.4.1.22 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosHbeCommandDrops | 1.3.6.1.4.1.2272.1.85.11.4.1.23 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosTcamSearchError | 1.3.6.1.4.1.2272.1.85.11.4.1.24 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEhpAllPortDownIstCounter | 1.3.6.1.4.1.2272.1.85.11.4.1.25 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEhpAllPortDownMltCounter | 1.3.6.1.4.1.2272.1.85.11.4.1.26 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEhpErrorDropCounter | 1.3.6.1.4.1.2272.1.85.11.4.1.27 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosIgrFilterDropCount | 1.3.6.1.4.1.2272.1.85.11.4.1.28 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosZapTxCtl | 1.3.6.1.4.1.2272.1.85.11.4.1.29 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosZapTxDat | 1.3.6.1.4.1.2272.1.85.11.4.1.30 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosZapRxCtl | 1.3.6.1.4.1.2272.1.85.11.4.1.31 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosZapRxDat | 1.3.6.1.4.1.2272.1.85.11.4.1.32 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosZapTxHbe | 1.3.6.1.4.1.2272.1.85.11.4.1.33 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosTcamSearchVal | 1.3.6.1.4.1.2272.1.85.11.4.1.34 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEmbDropCount | 1.3.6.1.4.1.2272.1.85.11.4.1.35 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEhpFilterDropCount | 1.3.6.1.4.1.2272.1.85.11.4.1.36 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEgrIpmcDropCount | 1.3.6.1.4.1.2272.1.85.11.4.1.37 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEgressEsb1Count | 1.3.6.1.4.1.2272.1.85.11.4.1.38 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEgressEsb2Count | 1.3.6.1.4.1.2272.1.85.11.4.1.39 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEgressEsb3Count | 1.3.6.1.4.1.2272.1.85.11.4.1.40 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEgressEsb4Count | 1.3.6.1.4.1.2272.1.85.11.4.1.41 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEgressEsb5Count | 1.3.6.1.4.1.2272.1.85.11.4.1.42 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosEgressEsb6Count | 1.3.6.1.4.1.2272.1.85.11.4.1.43 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosRspRx | 1.3.6.1.4.1.2272.1.85.11.4.1.44 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosOpTx | 1.3.6.1.4.1.2272.1.85.11.4.1.45 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosRspTx | 1.3.6.1.4.1.2272.1.85.11.4.1.46 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosCifRqCount | 1.3.6.1.4.1.2272.1.85.11.4.1.47 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosCifRsCounter | 1.3.6.1.4.1.2272.1.85.11.4.1.48 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage1Count | 1.3.6.1.4.1.2272.1.85.11.4.1.49 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage2Count | 1.3.6.1.4.1.2272.1.85.11.4.1.50 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage3Count | 1.3.6.1.4.1.2272.1.85.11.4.1.51 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage4Count | 1.3.6.1.4.1.2272.1.85.11.4.1.52 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage5Count | 1.3.6.1.4.1.2272.1.85.11.4.1.53 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage6Count | 1.3.6.1.4.1.2272.1.85.11.4.1.54 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage7Count | 1.3.6.1.4.1.2272.1.85.11.4.1.55 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage8Count | 1.3.6.1.4.1.2272.1.85.11.4.1.56 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage9Count | 1.3.6.1.4.1.2272.1.85.11.4.1.57 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosPage10Count | 1.3.6.1.4.1.2272.1.85.11.4.1.58 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosShPp | 1.3.6.1.4.1.2272.1.85.11.4.1.59 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosFpCounts | 1.3.6.1.4.1.2272.1.85.11.4.1.60 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosRspPlcThresholdReg | 1.3.6.1.4.1.2272.1.85.11.4.1.61 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosRePlc | 1.3.6.1.4.1.2272.1.85.11.4.1.62 | Counter64 | read-only | |
| C64 rcKhiForwardingCbZagrosNumPools | 1.3.6.1.4.1.2272.1.85.11.4.1.63 | Counter64 | read-only | |
| C32 rcKhiForwardingCbZagrosFpCntOPA | 1.3.6.1.4.1.2272.1.85.11.4.1.64 | Counter32 | read-only | Free page counter for OPA(Output Packet Assembler) |
| C32 rcKhiForwardingCbZagrosFpCntRPA | 1.3.6.1.4.1.2272.1.85.11.4.1.65 | Counter32 | read-only | Free page counter for RPA(RSP Packet Assembler) |
| C32 rcKhiForwardingCbZagrosFpCntFPM | 1.3.6.1.4.1.2272.1.85.11.4.1.66 | Counter32 | read-only | Free page counter for FPM(Free Page Manager) |
| C32 rcKhiForwardingCbZagrosRspPlcPktCntPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.67 | Counter32 | read-only | RSP PLC Peak Packet Count |
| C32 rcKhiForwardingCbZagrosRspPlcPktCntCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.68 | Counter32 | read-only | RSP PLC Current Packet Count |
| C32 rcKhiForwardingCbZagrosRePlcPktCntPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.69 | Counter32 | read-only | RE PLC(Replica Engine Packet Limit Count)Peak Packet Count |
| C32 rcKhiForwardingCbZagrosRePlcPktCntCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.70 | Counter32 | read-only | RE PLC Current Packet Count |
| C32 rcKhiForwardingCbZagrosShPpPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.71 | Counter32 | read-only | PMM shared pool Peak Value |
| C32 rcKhiForwardingCbZagrosShPpCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.72 | Counter32 | read-only | PMM shared pool Current Value |
| C32 rcKhiForwardingCbZagrosEgressMultiCastPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.73 | Counter32 | read-only | PMM EgressMultiCast Peak Value |
| C32 rcKhiForwardingCbZagrosEgressMultiCastCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.74 | Counter32 | read-only | PMM EgressMultiCast Current Value |
| C32 rcKhiForwardingCbZagrosEgressOOBPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.75 | Counter32 | read-only | PMM EgressOOB(Out Of Band) Peak Value |
| C32 rcKhiForwardingCbZagrosEgressOOBCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.76 | Counter32 | read-only | PMM EgressOOB Current Value |
| C32 rcKhiForwardingCbZagrosIngressHeartbeatPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.77 | Counter32 | read-only | PMM IngressHeartbeat Peak Value |
| C32 rcKhiForwardingCbZagrosIngressHeartbeatCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.78 | Counter32 | read-only | PMM IngressHeartbeat Current Value |
| C32 rcKhiForwardingCbZagrosIngressCOPInsertPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.79 | Counter32 | read-only | PMM IngressCOPInsert Peak Value |
| C32 rcKhiForwardingCbZagrosIngressCOPInsertCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.80 | Counter32 | read-only | PMM IngressCOPInsert Current Value |
| C32 rcKhiForwardingCbZagrosIngressEfCtlPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.81 | Counter32 | read-only | PMM Ingress EF/CTL(Expedited Forward/Control)Peak Value |
| C32 rcKhiForwardingCbZagrosIngressEfCtlCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.82 | Counter32 | read-only | PMM Ingress EF/CTL Current Value |
| C32 rcKhiForwardingCbZagrosIngressAfBePeak | 1.3.6.1.4.1.2272.1.85.11.4.1.83 | Counter32 | read-only | PMM Ingress AF/BE(Assured Forwarding/Best Effort)Peak Value |
| C32 rcKhiForwardingCbZagrosIngressAfBeCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.84 | Counter32 | read-only | PMM Ingress AF/BE Current Value |
| C32 rcKhiForwardingCbZagrosEgressL2BcUcPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.85 | Counter32 | read-only | PMM Egress L2BC/UC(Layer 2 Broadcast/Unicast)Peak Value |
| C32 rcKhiForwardingCbZagrosEgressL2BcUcCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.86 | Counter32 | read-only | PMM Egress L2BC/UC Current Value |
| C32 rcKhiForwardingCbZagrosEgressMirrorPeak | 1.3.6.1.4.1.2272.1.85.11.4.1.87 | Counter32 | read-only | PMM Egress Mirror Peak Value |
| C32 rcKhiForwardingCbZagrosEgressMirrorCurr | 1.3.6.1.4.1.2272.1.85.11.4.1.88 | Counter32 | read-only | PMM Egress Mirror Current Value |
| C32 rcKhiForwardingCbZagrosPool9Peak | 1.3.6.1.4.1.2272.1.85.11.4.1.89 | Counter32 | read-only | PMM Pool9 Peak Value |
| C32 rcKhiForwardingCbZagrosPool9Curr | 1.3.6.1.4.1.2272.1.85.11.4.1.90 | Counter32 | read-only | PMM Pool9 Current Value |
| rcKhiForwardingCbRspTable | 1.3.6.1.4.1.2272.1.85.11.5 | not-accessible | Forwarding Rsp Key Health Indicator MIB - All Cobalt Blue Data. | |
| rcKhiForwardingCbRspEntry | 1.3.6.1.4.1.2272.1.85.11.5.1 | not-accessible | Forwarding Rsp KHI - Cobalt Blue table entry. | |
| INT rcKhiForwardingCbRspIndex | 1.3.6.1.4.1.2272.1.85.11.5.1.1 | INTEGER | not-accessible | Index for CB's Forwarding Rsp Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used. |
| C64 rcKhiForwardingCbRspLsmDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.2 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspExceptionDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.3 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspFrameErrorDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.4 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspFdibFullDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.5 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIngrMltAllPortDown | 1.3.6.1.4.1.2272.1.85.11.5.1.6 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspEgressMltAllPortDownDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.7 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspEgressIpMcastRecordsNotFound | 1.3.6.1.4.1.2272.1.85.11.5.1.8 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspEgressIpMcastMltWrongPort | 1.3.6.1.4.1.2272.1.85.11.5.1.9 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspEgressIpMcastSourceKnockout | 1.3.6.1.4.1.2272.1.85.11.5.1.10 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIngressDaNotFoundDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.11 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIngressUnknown | 1.3.6.1.4.1.2272.1.85.11.5.1.12 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIngressDiscardDestIdDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.13 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspMacLearningPacketDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.14 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIngrMltAllPortsDown | 1.3.6.1.4.1.2272.1.85.11.5.1.15 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIngressIpmcSupressionDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.16 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspUnsupportedFeatureDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.17 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspAclDiscards | 1.3.6.1.4.1.2272.1.85.11.5.1.18 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIngressIpmcLookupFails | 1.3.6.1.4.1.2272.1.85.11.5.1.19 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIpv4DestIpLookupFails | 1.3.6.1.4.1.2272.1.85.11.5.1.20 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIpv4SourceIpLookupFails | 1.3.6.1.4.1.2272.1.85.11.5.1.21 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspL3MirrorDrops | 1.3.6.1.4.1.2272.1.85.11.5.1.22 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIpV6LookupFails | 1.3.6.1.4.1.2272.1.85.11.5.1.23 | Counter64 | read-only | |
| C64 rcKhiForwardingCbRspIpV6TunnelLookupV4Fails | 1.3.6.1.4.1.2272.1.85.11.5.1.24 | Counter64 | read-only | |
| rcKhiForwardingCbQeTable | 1.3.6.1.4.1.2272.1.85.11.6 | not-accessible | Forwarding Qe Key Health Indicator MIB - All Cobalt Blue Data. | |
| rcKhiForwardingCbQeEntry | 1.3.6.1.4.1.2272.1.85.11.6.1 | not-accessible | Forwarding Qe KHI - Cobalt Blue table entry. | |
| INT rcKhiForwardingCbQeIndex | 1.3.6.1.4.1.2272.1.85.11.6.1.1 | INTEGER | not-accessible | Index for CB's Forwarding Qe Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used. |
| C64 rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0 | 1.3.6.1.4.1.2272.1.85.11.6.1.2 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0 | 1.3.6.1.4.1.2272.1.85.11.6.1.3 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1 | 1.3.6.1.4.1.2272.1.85.11.6.1.4 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1 | 1.3.6.1.4.1.2272.1.85.11.6.1.5 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2 | 1.3.6.1.4.1.2272.1.85.11.6.1.6 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2 | 1.3.6.1.4.1.2272.1.85.11.6.1.7 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3 | 1.3.6.1.4.1.2272.1.85.11.6.1.8 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressQmAgrDequeuedPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.9 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressPmSwitchPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.10 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressPmLocalPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.11 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressPmSwitchTestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.12 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressPmLocalTestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.13 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP0PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.14 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP0PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.15 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP1PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.16 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP1PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.17 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP2PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.18 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP2PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.19 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP3PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.20 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP3PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.21 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP4PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.22 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP4PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.23 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP5PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.24 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP5PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.25 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP6PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.26 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP6PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.27 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP7PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.28 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP7PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.29 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP8PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.30 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP8PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.31 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP9PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.32 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP9PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.33 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP10PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.34 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP10PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.35 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP11PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.36 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP11PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.37 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP12PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.38 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP12PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.39 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP13PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.40 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP13PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.41 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP14PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.42 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP14PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.43 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxP15PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.44 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxP15PktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.45 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr0RxTestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.46 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressSr1RxTestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.47 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressRbIdp0RequestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.48 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressRbIdp1RequestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.49 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressRbIdp2RequestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.50 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressRbIdp3RequestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.51 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressRbIdp4RequestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.52 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeIngressRbEnqrespPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.53 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSvPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.54 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P0TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.55 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P0TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.56 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P1TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.57 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P1TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.58 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P2TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.59 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P2TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.60 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P3TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.61 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P3TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.62 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P4TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.63 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P4TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.64 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P5TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.65 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P5TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.66 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P6TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.67 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P6TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.68 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P7TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.69 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P7TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.70 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P8TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.71 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P8TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.72 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P9TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.73 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P9TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.74 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P10TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.75 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P10TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.76 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P11TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.77 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P11TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.78 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P12TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.79 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P12TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.80 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P13TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.81 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P13TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.82 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P14TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.83 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P14TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.84 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0P15TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.85 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1P15TxPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.86 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt0TxTestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.87 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeEgressSt1TxTestPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.88 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeSvPartialPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.89 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeQmAgrWredDroppedPktCnt0 | 1.3.6.1.4.1.2272.1.85.11.6.1.90 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeQmAgrWredDroppedPktCnt1 | 1.3.6.1.4.1.2272.1.85.11.6.1.91 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeQmAgrWredDroppedPktCnt2 | 1.3.6.1.4.1.2272.1.85.11.6.1.92 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeQmAgrPolicedDroppedPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.93 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeQmAgrNonWredDroppedPktCnt | 1.3.6.1.4.1.2272.1.85.11.6.1.94 | Counter64 | read-only | |
| C64 rcKhiForwardingCbQeQmError1 | 1.3.6.1.4.1.2272.1.85.11.6.1.95 | Counter64 | read-only | |
| rcKhiForwardingIfpTable | 1.3.6.1.4.1.2272.1.85.11.7 | not-accessible | Forwarding Ifp Key Health Indicator MIB - All VSP Data. | |
| rcKhiForwardingIfpEntry | 1.3.6.1.4.1.2272.1.85.11.7.1 | not-accessible | Forwarding Ifp KHI - VSP table entry. | |
| I32 rcKhiForwardingIfpSlot | 1.3.6.1.4.1.2272.1.85.11.7.1.1 | Integer32 | not-accessible | Slot Number |
| I32 rcKhiForwardingIfpIndex | 1.3.6.1.4.1.2272.1.85.11.7.1.2 | Integer32 | not-accessible | Index of the IFP Rule |
| STR rcKhiForwardingIfpName | 1.3.6.1.4.1.2272.1.85.11.7.1.3 | DisplayString | read-only | Name of the IFP Rule |
| STR rcKhiForwardingIfpSlice0Ports | 1.3.6.1.4.1.2272.1.85.11.7.1.4 | DisplayString | read-only | Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type |
| C32 rcKhiForwardingIfpSlice0Cnt | 1.3.6.1.4.1.2272.1.85.11.7.1.5 | Counter32 | read-only | Counter for slice 0 |
| STR rcKhiForwardingIfpSlice1Ports | 1.3.6.1.4.1.2272.1.85.11.7.1.6 | DisplayString | read-only | Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type |
| C32 rcKhiForwardingIfpSlice1Cnt | 1.3.6.1.4.1.2272.1.85.11.7.1.7 | Counter32 | read-only | Counter for slice 1 |
| STR rcKhiForwardingIfpSlice2Ports | 1.3.6.1.4.1.2272.1.85.11.7.1.8 | DisplayString | read-only | Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type |
| C32 rcKhiForwardingIfpSlice2Cnt | 1.3.6.1.4.1.2272.1.85.11.7.1.9 | Counter32 | read-only | Counter for slice 2 |
| rcKhiForwardingIfpNewTable | 1.3.6.1.4.1.2272.1.85.11.8 | not-accessible | Forwarding Ifp New Key Health Indicator MIB. This table replaces the old table rcKhiForwardingIfpTable | |
| rcKhiForwardingIfpNewEntry | 1.3.6.1.4.1.2272.1.85.11.8.1 | not-accessible | Forwarding Ifp KHI - VSP table entry. | |
| I32 rcKhiForwardingIfpNewSlot | 1.3.6.1.4.1.2272.1.85.11.8.1.1 | Integer32 | not-accessible | Slot Number |
| INT rcKhiForwardingIfpNewTblType | 1.3.6.1.4.1.2272.1.85.11.8.1.2 | INTEGER | not-accessible | Type of table IFP PCV for both 1G and 10G cards. IFP PCV MAC-in-MAC Tagged and Untagged are for 10G card |
| I32 rcKhiForwardingIfpNewIndex | 1.3.6.1.4.1.2272.1.85.11.8.1.3 | Integer32 | not-accessible | Index of the IFP Rule |
| STR rcKhiForwardingIfpNewName | 1.3.6.1.4.1.2272.1.85.11.8.1.4 | DisplayString | read-only | Name of the IFP Rule |
| STR rcKhiForwardingIfpNewSlice0Ports | 1.3.6.1.4.1.2272.1.85.11.8.1.5 | DisplayString | read-only | Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type |
| C32 rcKhiForwardingIfpNewSlice0Cnt | 1.3.6.1.4.1.2272.1.85.11.8.1.6 | Counter32 | read-only | Counter for slice 0 |
| STR rcKhiForwardingIfpNewSlice1Ports | 1.3.6.1.4.1.2272.1.85.11.8.1.7 | DisplayString | read-only | Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type |
| C32 rcKhiForwardingIfpNewSlice1Cnt | 1.3.6.1.4.1.2272.1.85.11.8.1.8 | Counter32 | read-only | Counter for slice 1 |
| STR rcKhiForwardingIfpNewSlice2Ports | 1.3.6.1.4.1.2272.1.85.11.8.1.9 | DisplayString | read-only | Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type |
| C32 rcKhiForwardingIfpNewSlice2Cnt | 1.3.6.1.4.1.2272.1.85.11.8.1.10 | Counter32 | read-only | Counter for slice 2 |
| rcKhiCpp | 1.3.6.1.4.1.2272.1.85.12 | |||
| T/F rcKhiCppPortStatsClear | 1.3.6.1.4.1.2272.1.85.12.1 | TruthValue | read-write | Clear Khi Cpp Port Statistics MIB - All VSP Data. |
| T/F rcKhiCppIoCopStatsClear | 1.3.6.1.4.1.2272.1.85.12.2 | TruthValue | read-write | Clear Khi Cpp Slot Statistics MIB - All VSP Data. |
| rcKhiCppPortStatsTable | 1.3.6.1.4.1.2272.1.85.12.3 | not-accessible | Khi Cpp Port Statistics MIB - All VSP Data. | |
| rcKhiCppPortStatsEntry | 1.3.6.1.4.1.2272.1.85.12.3.1 | not-accessible | Khi Cpp Port Statistics - VSP table entry. | |
| NUM rcKhiCppPortStatsPort | 1.3.6.1.4.1.2272.1.85.12.3.1.1 | InterfaceIndex | not-accessible | Port Number-this entry contains information about packet type, count of Rx and Tx packet |
| I32 rcKhiCppPortStatsPacket | 1.3.6.1.4.1.2272.1.85.12.3.1.2 | Integer32 | not-accessible | Packet Type |
| STR rcKhiCppPortStatsPacketName | 1.3.6.1.4.1.2272.1.85.12.3.1.3 | DisplayString | read-only | Name of the Packet |
| C64 rcKhiCppPortStatsRxPackets | 1.3.6.1.4.1.2272.1.85.12.3.1.4 | Counter64 | read-only | Rx count for a particular Packet Type |
| C64 rcKhiCppPortStatsTxPackets | 1.3.6.1.4.1.2272.1.85.12.3.1.5 | Counter64 | read-only | Tx count for a particular Packet Type |
| rcKhiCppIoCopStatsTable | 1.3.6.1.4.1.2272.1.85.12.4 | not-accessible | Khi Cpp IoCop Statistics MIB - All VSP Data. | |
| rcKhiCppIoCopStatsEntry | 1.3.6.1.4.1.2272.1.85.12.4.1 | not-accessible | Khi Cpp IoCop Statistics - VSP table entry. | |
| I32 rcKhiCppIoCopStatsSlot | 1.3.6.1.4.1.2272.1.85.12.4.1.1 | Integer32 | not-accessible | Slot Number |
| C64 rcKhiCppIoCopStatsMacMgmtRxPackets | 1.3.6.1.4.1.2272.1.85.12.4.1.2 | Counter64 | read-only | MacMgmt Rx Packets |
| C64 rcKhiCppIoCopStatsIpFixRxPackets | 1.3.6.1.4.1.2272.1.85.12.4.1.3 | Counter64 | read-only | IpFix Rx Packets |
| rcKhiCppProtocolDrops | 1.3.6.1.4.1.2272.1.85.12.5 | |||
| T/F rcKhiCppProtocolDropsClear | 1.3.6.1.4.1.2272.1.85.12.5.1 | TruthValue | read-write | Clear all protocol drop counters |
| C64 rcKhiCppProtocolDropsDataExpCnt | 1.3.6.1.4.1.2272.1.85.12.5.2 | Counter64 | read-only | Data Exp Drop Counter |
| C64 rcKhiCppProtocolDropsTtlExpCnt | 1.3.6.1.4.1.2272.1.85.12.5.3 | Counter64 | read-only | Ttl Exp Drop Counter |
| C64 rcKhiCppProtocolDropsIpmcDataCnt | 1.3.6.1.4.1.2272.1.85.12.5.4 | Counter64 | read-only | Ipmc Data Drop Counter |
| C64 rcKhiCppProtocolDropsMacLearningCnt | 1.3.6.1.4.1.2272.1.85.12.5.5 | Counter64 | read-only | Mac learning Drop Counter |
| C64 rcKhiCppProtocolDropsIsIsCnt | 1.3.6.1.4.1.2272.1.85.12.5.6 | Counter64 | read-only | IsIs Drop Counter |
| C64 rcKhiCppProtocolDropsBgpCnt | 1.3.6.1.4.1.2272.1.85.12.5.7 | Counter64 | read-only | Bgp Drop Counter |
| C64 rcKhiCppProtocolDropsRipV1Cnt | 1.3.6.1.4.1.2272.1.85.12.5.8 | Counter64 | read-only | RipV1 Drop Counter |
| C64 rcKhiCppProtocolDropsRipV2Cnt | 1.3.6.1.4.1.2272.1.85.12.5.9 | Counter64 | read-only | RipV2 Drop Counter |
| C64 rcKhiCppProtocolDropsOspfMcCnt | 1.3.6.1.4.1.2272.1.85.12.5.10 | Counter64 | read-only | Ospf Mc Drop Counter |
| C64 rcKhiCppProtocolDropsFtpCnt | 1.3.6.1.4.1.2272.1.85.12.5.11 | Counter64 | read-only | Ftp Drop Counter |
| C64 rcKhiCppProtocolDropsTftpCnt | 1.3.6.1.4.1.2272.1.85.12.5.12 | Counter64 | read-only | Tftp Drop Counter |
| C64 rcKhiCppProtocolDropsSnmpCnt | 1.3.6.1.4.1.2272.1.85.12.5.13 | Counter64 | read-only | Snmp Drop Counter |
| C64 rcKhiCppProtocolDropsTelnetCnt | 1.3.6.1.4.1.2272.1.85.12.5.14 | Counter64 | read-only | Telnet Drop Counter |
| C64 rcKhiCppProtocolDropsSshCnt | 1.3.6.1.4.1.2272.1.85.12.5.15 | Counter64 | read-only | Ssh Drop Counter |
| C64 rcKhiCppProtocolDropsRshCnt | 1.3.6.1.4.1.2272.1.85.12.5.16 | Counter64 | read-only | Rsh Drop Counter |
| C64 rcKhiCppProtocolDropsIstCtlCnt | 1.3.6.1.4.1.2272.1.85.12.5.17 | Counter64 | read-only | IstCtl Drop Counter |
| C64 rcKhiCppProtocolDropsRadiusCnt | 1.3.6.1.4.1.2272.1.85.12.5.18 | Counter64 | read-only | Radius Drop Counter |
| C64 rcKhiCppProtocolDropsNtpCnt | 1.3.6.1.4.1.2272.1.85.12.5.19 | Counter64 | read-only | Ntp Drop Counter |
| C64 rcKhiCppProtocolDropsDhcpCnt | 1.3.6.1.4.1.2272.1.85.12.5.20 | Counter64 | read-only | Dhcp Drop Counter |
| C64 rcKhiCppProtocolDropsIcmpV4Cnt | 1.3.6.1.4.1.2272.1.85.12.5.21 | Counter64 | read-only | IcmpV4 Drop Counter |
| C64 rcKhiCppProtocolDropsIcmpV6Cnt | 1.3.6.1.4.1.2272.1.85.12.5.22 | Counter64 | read-only | IcmpV6 Drop Counter |
| C64 rcKhiCppProtocolDropsIgmpCnt | 1.3.6.1.4.1.2272.1.85.12.5.23 | Counter64 | read-only | Igmp Drop Counter |
| C64 rcKhiCppProtocolDropsPimMcCnt | 1.3.6.1.4.1.2272.1.85.12.5.24 | Counter64 | read-only | Pim Mc Drop Counter |
| C64 rcKhiCppProtocolDropsVrrpCnt | 1.3.6.1.4.1.2272.1.85.12.5.25 | Counter64 | read-only | Vrrp Drop Counter |
| C64 rcKhiCppProtocolDropsArpReqCnt | 1.3.6.1.4.1.2272.1.85.12.5.26 | Counter64 | read-only | Arp Req Drop Counter |
| C64 rcKhiCppProtocolDropsArpOtherCnt | 1.3.6.1.4.1.2272.1.85.12.5.27 | Counter64 | read-only | Arp Other Drop Counter |
| C64 rcKhiCppProtocolDropsRarpReqCnt | 1.3.6.1.4.1.2272.1.85.12.5.28 | Counter64 | read-only | Rarp Req Drop Counter |
| C64 rcKhiCppProtocolDropsRarpOtherCnt | 1.3.6.1.4.1.2272.1.85.12.5.29 | Counter64 | read-only | Rarp Other Drop Counter |
| C64 rcKhiCppProtocolDropsSlppCnt | 1.3.6.1.4.1.2272.1.85.12.5.30 | Counter64 | read-only | Slpp Drop Counter |
| C64 rcKhiCppProtocolDropsBpduCnt | 1.3.6.1.4.1.2272.1.85.12.5.31 | Counter64 | read-only | Bpdu Drop Counter |
| C64 rcKhiCppProtocolDropsTdpCnt | 1.3.6.1.4.1.2272.1.85.12.5.32 | Counter64 | read-only | Tdp Drop Counter |
| C64 rcKhiCppProtocolDropsEapCnt | 1.3.6.1.4.1.2272.1.85.12.5.33 | Counter64 | read-only | Eap Drop Counter |
| C64 rcKhiCppProtocolDropsLacpCnt | 1.3.6.1.4.1.2272.1.85.12.5.34 | Counter64 | read-only | Lacp Drop Counter |
| C64 rcKhiCppProtocolDropsVlacpCnt | 1.3.6.1.4.1.2272.1.85.12.5.35 | Counter64 | read-only | Vlacp Drop Counter |
| C64 rcKhiCppProtocolDropsMldV2Cnt | 1.3.6.1.4.1.2272.1.85.12.5.36 | Counter64 | read-only | Mld V2 Drop Counter |
| C64 rcKhiCppProtocolDropsLldpCnt | 1.3.6.1.4.1.2272.1.85.12.5.37 | Counter64 | read-only | Lldp Drop Counter |
| C64 rcKhiCppProtocolDropsHttpCnt | 1.3.6.1.4.1.2272.1.85.12.5.38 | Counter64 | read-only | Http Drop Counter |
| C64 rcKhiCppProtocolDropsPimUcCnt | 1.3.6.1.4.1.2272.1.85.12.5.39 | Counter64 | read-only | Pim Uc Drop Counter |
| C64 rcKhiCppProtocolDropsOspfUcCnt | 1.3.6.1.4.1.2272.1.85.12.5.40 | Counter64 | read-only | Ospf Uc Drop Counter |
| C64 rcKhiCppProtocolDropsDnsCnt | 1.3.6.1.4.1.2272.1.85.12.5.41 | Counter64 | read-only | Dns Drop Counter |
| C64 rcKhiCppProtocolDropsIcmpBcCnt | 1.3.6.1.4.1.2272.1.85.12.5.42 | Counter64 | read-only | Icmp Bc Drop Counter |
| C64 rcKhiCppProtocolDropsIpfixCnt | 1.3.6.1.4.1.2272.1.85.12.5.43 | Counter64 | read-only | Ipfix Drop Counter |
| C64 rcKhiCppProtocolDropsTestPktCnt | 1.3.6.1.4.1.2272.1.85.12.5.44 | Counter64 | read-only | Test Pkt Drop Counter |
| rc2k | 1.3.6.1.4.1.2272.1.100 | |||
| rc2kChassis | 1.3.6.1.4.1.2272.1.100.1 | |||
| OCT rc2kChassisPortOperStatus | 1.3.6.1.4.1.2272.1.100.1.1 | OCTET STRING | read-only | A bit array that contains the oper-status of the ports in the device. 2 bits are used for each port. The high order 2 bits of the first octet represent port #0, the next two bits are used for port #1, etc. The status is encoded with the following scheme : value meaning ----- ------- 0 no-link (admin=up, oper=down) 1 up (admin=up, oper=up) 2 down (admin=down, oper=down) 3 testing (admin=test, oper=test) |
| G32 rc2kChassisTemperature | 1.3.6.1.4.1.2272.1.100.1.2 | Gauge32 | read-only | Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis. |
| MAC rc2kChassisBaseMacAddr | 1.3.6.1.4.1.2272.1.100.1.5 | MacAddress | read-only | base mac addr |
| I32 rc2kChassisMacAddrCapacity | 1.3.6.1.4.1.2272.1.100.1.6 | Integer32 | read-only | Mac Address Capacity |
| INT rc2kChassisSystemTempLedColor | 1.3.6.1.4.1.2272.1.100.1.10 | INTEGER | read-only | Used to indicate the led color of the system temperature which is under or above the threshold. The threshold is 60 degree in celsius. 'green' menas normal. And temperature under threshold. 'red' means one of the zone temperature is above the threshold. 'amber' is the initial state, means device have not start to chekc the temperature yet. |
| rc2kCpuSerialPortTable | 1.3.6.1.4.1.2272.1.100.3 | not-accessible | 2k CPU Serial Port table | |
| rc2kCpuSerialPortEntry | 1.3.6.1.4.1.2272.1.100.3.1 | not-accessible | Entry containing information of 2k CPU Serial Port | |
| NUM rc2kCpuSerialPortIfIndex | 1.3.6.1.4.1.2272.1.100.3.1.1 | InterfaceIndex | read-only | IfIndex for this port. |
| STR rc2kCpuSerialPortDescr | 1.3.6.1.4.1.2272.1.100.3.1.2 | DisplayString | read-only | Port description. |
| INT rc2kCpuSerialPortMode | 1.3.6.1.4.1.2272.1.100.3.1.3 | INTEGER | read-write | Used to configure the mode this port should operate in. |
| INT rc2kCpuSerialPortAdminStatus | 1.3.6.1.4.1.2272.1.100.3.1.4 | INTEGER | read-write | Used to configure the administrative status setting for this port. |
| INT rc2kCpuSerialPortOperStatus | 1.3.6.1.4.1.2272.1.100.3.1.5 | INTEGER | read-only | Used to indicate the operational status setting for this port. |
| INT rc2kCpuSerialPortBaudRate | 1.3.6.1.4.1.2272.1.100.3.1.6 | INTEGER | read-write | Used to configure the baud rate of this port. |
| INT rc2kCpuSerialPortDataBits | 1.3.6.1.4.1.2272.1.100.3.1.7 | INTEGER | read-write | Used to configure the number of data bits, per byte of data, this port should send/receive. |
| IP rc2kCpuSerialPortMyAddr | 1.3.6.1.4.1.2272.1.100.3.1.8 | IpAddress | read-write | Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes. |
| IP rc2kCpuSerialPortPeerAddr | 1.3.6.1.4.1.2272.1.100.3.1.9 | IpAddress | read-write | Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes. |
| INT rc2kCpuSerialPortSlipMtu | 1.3.6.1.4.1.2272.1.100.3.1.10 | INTEGER | read-write | Used to configure the MTU for this port. Used for slip only. |
| T/F rc2kCpuSerialPortSlipTxRxCompress | 1.3.6.1.4.1.2272.1.100.3.1.11 | TruthValue | read-write | Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only. |
| T/F rc2kCpuSerialPortSlipRxCompress | 1.3.6.1.4.1.2272.1.100.3.1.12 | TruthValue | read-write | Used to enable/disable compression for receiving packets on this port. Used for slip only. |
| OCT rc2kCpuSerialPortPppConfigFile | 1.3.6.1.4.1.2272.1.100.3.1.13 | OCTET STRING | read-write | Used to configure the configuration file to use for PPP. |
| rc2kDevice | 1.3.6.1.4.1.2272.1.100.4 | |||
| rc2kDeviceGlobalTable | 1.3.6.1.4.1.2272.1.100.4.1 | not-accessible | 2k CPU Ethernet Port table | |
| rc2kDeviceGlobalEntry | 1.3.6.1.4.1.2272.1.100.4.1.1 | not-accessible | Entry containing information of 2k CPU Ethernet Port | |
| INT rc2kDeviceGlobalSlot | 1.3.6.1.4.1.2272.1.100.4.1.1.1 | INTEGER | read-only | slot number |
| I32 rc2kDeviceGlobalFlashBytesUsed | 1.3.6.1.4.1.2272.1.100.4.1.1.2 | Integer32 | read-only | bytes used |
| I32 rc2kDeviceGlobalFlashBytesFree | 1.3.6.1.4.1.2272.1.100.4.1.1.3 | Integer32 | read-only | bytes free |
| I32 rc2kDeviceGlobalFlashNumFiles | 1.3.6.1.4.1.2272.1.100.4.1.1.4 | Integer32 | read-only | # files in flash |
| I32 rc2kDeviceGlobalPcmciaBytesUsed | 1.3.6.1.4.1.2272.1.100.4.1.1.5 | Integer32 | read-only | bytes used |
| I32 rc2kDeviceGlobalPcmciaBytesFree | 1.3.6.1.4.1.2272.1.100.4.1.1.6 | Integer32 | read-only | bytes free |
| I32 rc2kDeviceGlobalPcmciaNumFiles | 1.3.6.1.4.1.2272.1.100.4.1.1.7 | Integer32 | read-only | # files in pcmcia |
| INT rc2kDeviceGlobalAction | 1.3.6.1.4.1.2272.1.100.4.1.1.8 | INTEGER | read-write | none(1), resetPcmcia(2), .. |
| INT rc2kDeviceGlobalResult | 1.3.6.1.4.1.2272.1.100.4.1.1.9 | INTEGER | read-only | Used to indicate the result of the last action performed on one of the system's device. |
| C64 rc2kDeviceGlobalUsbBytesUsed | 1.3.6.1.4.1.2272.1.100.4.1.1.13 | Counter64 | read-only | bytes used in USB |
| C64 rc2kDeviceGlobalUsbBytesFree | 1.3.6.1.4.1.2272.1.100.4.1.1.14 | Counter64 | read-only | bytes free in USB |
| I32 rc2kDeviceGlobalUsbNumFiles | 1.3.6.1.4.1.2272.1.100.4.1.1.15 | Integer32 | read-only | # files in USB |
| C64 rc2kDeviceGlobalExtflashBytesUsed | 1.3.6.1.4.1.2272.1.100.4.1.1.16 | Counter64 | read-only | bytes used in Extflash |
| C64 rc2kDeviceGlobalExtflashBytesFree | 1.3.6.1.4.1.2272.1.100.4.1.1.17 | Counter64 | read-only | bytes free in Extflash |
| I32 rc2kDeviceGlobalExtflashNumFiles | 1.3.6.1.4.1.2272.1.100.4.1.1.18 | Integer32 | read-only | # files in Extflash |
| I32 rc2kDeviceSeparator1 | 1.3.6.1.4.1.2272.1.100.4.2 | Integer32 | read-only | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| rc2kDeviceFlashFileTable | 1.3.6.1.4.1.2272.1.100.4.3 | not-accessible | 2k Flash table | |
| rc2kDeviceFlashFileEntry | 1.3.6.1.4.1.2272.1.100.4.3.1 | not-accessible | Entry containing information of 2k CPU Serial Port | |
| INT rc2kDeviceFlashFileSlot | 1.3.6.1.4.1.2272.1.100.4.3.1.1 | INTEGER | read-only | slot number |
| STR rc2kDeviceFlashFileName | 1.3.6.1.4.1.2272.1.100.4.3.1.2 | DisplayString | read-only | name of file |
| STR rc2kDeviceFlashFileDate | 1.3.6.1.4.1.2272.1.100.4.3.1.3 | DisplayString | read-only | date |
| I32 rc2kDeviceFlashFileSize | 1.3.6.1.4.1.2272.1.100.4.3.1.4 | Integer32 | read-only | size in bytes |
| T/F rc2kDevicePcmciaPresent | 1.3.6.1.4.1.2272.1.100.4.4 | TruthValue | read-only | pcmcia is a slower device. This leaf is used to stop the access into pcmcia file table when it got the end of flash file table. |
| I32 rc2kDeviceSeparator2 | 1.3.6.1.4.1.2272.1.100.4.6 | Integer32 | read-only | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| rc2kDeviceExtflashFileTable | 1.3.6.1.4.1.2272.1.100.4.9 | not-accessible | 2k Flash table | |
| rc2kDeviceExtflashFileEntry | 1.3.6.1.4.1.2272.1.100.4.9.1 | not-accessible | Entry containing information of extflash files | |
| I32 rc2kDeviceExtflashFileSlot | 1.3.6.1.4.1.2272.1.100.4.9.1.1 | Integer32 | not-accessible | slot number |
| STR rc2kDeviceExtflashFileName | 1.3.6.1.4.1.2272.1.100.4.9.1.2 | DisplayString | not-accessible | name of file |
| STR rc2kDeviceExtflashFileDate | 1.3.6.1.4.1.2272.1.100.4.9.1.3 | DisplayString | read-only | date |
| U32 rc2kDeviceExtflashFileSize | 1.3.6.1.4.1.2272.1.100.4.9.1.4 | Unsigned32 | read-only | size in bytes |
| rc2kDeviceUsbFileTable | 1.3.6.1.4.1.2272.1.100.4.10 | not-accessible | 2k Usb table | |
| rc2kDeviceUsbFileEntry | 1.3.6.1.4.1.2272.1.100.4.10.1 | not-accessible | Entry containing information of USB files | |
| I32 rc2kDeviceUsbFileSlot | 1.3.6.1.4.1.2272.1.100.4.10.1.1 | Integer32 | not-accessible | slot number |
| STR rc2kDeviceUsbFileName | 1.3.6.1.4.1.2272.1.100.4.10.1.2 | DisplayString | not-accessible | name of file |
| STR rc2kDeviceUsbFileDate | 1.3.6.1.4.1.2272.1.100.4.10.1.3 | DisplayString | read-only | date |
| U32 rc2kDeviceUsbFileSize | 1.3.6.1.4.1.2272.1.100.4.10.1.4 | Unsigned32 | read-only | size in bytes |
| rc2kBootConfigTable | 1.3.6.1.4.1.2272.1.100.5 | not-accessible | 2k Boot Configuration table | |
| rc2kBootConfigEntry | 1.3.6.1.4.1.2272.1.100.5.1 | not-accessible | Entry containing boot configuration information. | |
| INT rc2kBootConfigSlot | 1.3.6.1.4.1.2272.1.100.5.1.1 | INTEGER | read-only | slot number, VSP uses 1,2 |
| STR rc2kBootConfigLastBootConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.2 | DisplayString | read-only | boot config source |
| STR rc2kBootConfigLastRuntimeImageSource | 1.3.6.1.4.1.2272.1.100.5.1.3 | DisplayString | read-only | runtime image source |
| STR rc2kBootConfigLastRuntimeConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.4 | DisplayString | read-only | runtime config source |
| STR rc2kBootConfigPrimaryImageSource | 1.3.6.1.4.1.2272.1.100.5.1.5 | DisplayString | read-write | image source |
| STR rc2kBootConfigPrimaryConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.6 | DisplayString | read-write | config source |
| STR rc2kBootConfigSecondaryImageSource | 1.3.6.1.4.1.2272.1.100.5.1.7 | DisplayString | read-write | image source |
| STR rc2kBootConfigSecondaryConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.8 | DisplayString | read-write | config source |
| STR rc2kBootConfigTertiaryImageSource | 1.3.6.1.4.1.2272.1.100.5.1.9 | DisplayString | read-write | image source |
| STR rc2kBootConfigTertiaryConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.10 | DisplayString | read-write | config source |
| T/F rc2kBootConfigEnableAutoBoot | 1.3.6.1.4.1.2272.1.100.5.1.11 | TruthValue | read-write | auto boot mode |
| T/F rc2kBootConfigEnableFactoryDefaults | 1.3.6.1.4.1.2272.1.100.5.1.12 | TruthValue | read-write | use factory default |
| T/F rc2kBootConfigEnableDebugMode | 1.3.6.1.4.1.2272.1.100.5.1.13 | TruthValue | read-write | debug mode |
| T/F rc2kBootConfigEnableHwWatchDogTimer | 1.3.6.1.4.1.2272.1.100.5.1.14 | TruthValue | read-write | hw watch dog timer |
| T/F rc2kBootConfigEnableRebootOnError | 1.3.6.1.4.1.2272.1.100.5.1.15 | TruthValue | read-write | reboot on error |
| T/F rc2kBootConfigEnableTelnetServer | 1.3.6.1.4.1.2272.1.100.5.1.16 | TruthValue | read-write | telnet server |
| T/F rc2kBootConfigEnableRloginServer | 1.3.6.1.4.1.2272.1.100.5.1.17 | TruthValue | read-write | rlogin server |
| T/F rc2kBootConfigEnableFtpServer | 1.3.6.1.4.1.2272.1.100.5.1.18 | TruthValue | read-write | ftp server |
| T/F rc2kBootConfigEnableTftpServer | 1.3.6.1.4.1.2272.1.100.5.1.19 | TruthValue | read-write | tftp server |
| STR rc2kBootConfigSwVersion | 1.3.6.1.4.1.2272.1.100.5.1.20 | DisplayString | read-only | current sw version |
| INT rc2kBootConfigMulticastConfigProfile | 1.3.6.1.4.1.2272.1.100.5.1.21 | INTEGER | read-only | multicast config |
| T/F rc2kBootConfigEnableSshServer | 1.3.6.1.4.1.2272.1.100.5.1.22 | TruthValue | read-write | ssh server |
| T/F rc2kBootConfigEnableAltLed | 1.3.6.1.4.1.2272.1.100.5.1.23 | TruthValue | read-write | Boot flag for enableing Alternate LED |
| STR rc2kBootConfigPrimaryBackupConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.24 | DisplayString | read-write | primary backup config source (safeconfig) |
| STR rc2kBootConfigSecondaryBackupConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.25 | DisplayString | read-write | secondary backup config source (safeconfig) |
| STR rc2kBootConfigTertiaryBackupConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.26 | DisplayString | read-write | tertiary backup config source (safeconfig) |
| T/F rc2kBootConfigEnable8616ReAutoneg | 1.3.6.1.4.1.2272.1.100.5.1.27 | TruthValue | read-write | Enable re-autoneg for 8616SX Cards (Intel GMAC fix) |
| STR rc2kBootConfigMezzImageSource | 1.3.6.1.4.1.2272.1.100.5.1.28 | DisplayString | read-write | Mezz image source |
| T/F rc2kBootConfigEnableMezz | 1.3.6.1.4.1.2272.1.100.5.1.29 | TruthValue | read-write | Enable/disable Mezz Flag |
| rc2kCardTable | 1.3.6.1.4.1.2272.1.100.6 | not-accessible | 2k Card table | |
| rc2kCardEntry | 1.3.6.1.4.1.2272.1.100.6.1 | not-accessible | Entry containing information of 2k Card | |
| INT rc2kCardIndex | 1.3.6.1.4.1.2272.1.100.6.1.1 | INTEGER | read-only | slot number. |
| INT rc2kCardFrontType | 1.3.6.1.4.1.2272.1.100.6.1.2 | INTEGER | read-only | Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: | 6 | 1 | 5 | 4 | 1 | 3 | 4 | 8 | +------+-------+-------+-------+------------+------+------+------+ bits : |31-26 | 25 | 24-20 | 19-16 | 15 | 14-12 | 11-8 | 7-0 | +------+-------+-------+-------+----+-------+------+------+------+ field : | a | b | c | d | e | f | g | h | +------+-------+-------+-------+----+-------+------+------+------+ a : Family type/Product line (6 bits (5 bits usuable) (was 4 bits)) MSB bit31 should not be used (MIB compiler fails) 0x0-00 = 0000-00 = Reserved 0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans) 0x2-00 = 0010-00 = Boardwalk 0x2-01 = 0010-01 = Power Ranger 0x3-00 = 0011-00 = Marvin Gardens 0x4-00 = 0100-00 = Cobalt Blue (was Thunderbolt and Pacific before that - both are obsolete) 0x5-00 = 0101-00 = PP8300 (was ParkPlace) 0x6-00 = 0110-00 = Central Office (only used in chassis) 0x7-00 = 0111-00 = Alteon WebSystems b : Interface / Device type variation: (Were 3 bits, 2 bits taken by family) 0x1 = 0 = Non M-Module 0x1 = 1 = M-module (128K RARU records) c : Interface / device type: (5 bits) 0x0 = 00000 = CPU 0x1 = 00001 = Switch fabric 0x2 = 00010 = Copper Ethernet 0x3 = 00011 = Fiber Ethernet 0x4 = 00100 = Sonet (Packets) 0x5 = 00101 = ATM 0x6 = 00110 = Token Ring 0x7 = 00111 = RMON 0x8 = 01000 = BFM (Frame or cells indicated by field 'a' above) 0x9 = 01001 = PSU 0xa = 01010 = Fan Tray 0xb = 01011 = Chassis/Backplane 0xc = 01100 = CPU Mezz 0xd = 01101 = SSL 0xe = 01110 = LaunchPad 0xf = 01111 = Chassis/Midplane 0x10 = 10000 = Auxillary Card 0x11 = 10001 = reserved for future 0x12 = 10010 = reserved for future 0x13 = 10011 = WSM Fiber Ethernet d : Maximum speed (highest negotiable speed) (4 bits) 0x0 = 0000 = 10 Mbit 0x1 = 0001 = 100 Mbit 0x2 = 0010 = 1 Gbit 0x3 = 0011 = 10 Gbit 0x4 = 0100 = OC-3 0x5 = 0101 = OC-12 0x6 = 0110 = OC-48 0x7 = 0111 = OC-92 0x8 = 1000 = OC-192 0x9 = 1001 = 4 Mbit (TR) 0xa = 1010 = 16 Mbit (TR) 0xb = 1011 = E3 0xc = 1100 = DS1 0xd = 1101 = DS3 0xe = 1110 = none (no PHY interfaces on board) 0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion) e : AM&OM-06/28/2006: This bit was originally used to indicate port redundancy. For PR it is used as a differentiator between Boomslang (0) and Copperhead (1). 0=non-redundant, 1=redundant; (1 bit) f : Card specific info. (3 bits) For Gigabit used as follows: 000=short-haul (SX) 010=long-haul (LX) 100=extra-distance (DX) 101=GBIC 110=SFP For 10 Gigabit used as follws 000 = 10GE WAN serial 1310nm (XLW) 001 = 10GE WAN serial 1550nm (XEW) 100 = 10GE LAN serial 1310nm (XLR) 101 = 10GE LAN serial 1550nm (XER) 011 = 10GE LAN/WAN (XZW) For ATM/Sonet used as follows 000 = multi mode 001 = single mode 010 = single or multimode 011 = not applicable (e.g., copper has no mode) For Marvin Gardens, indicates number of MDA slots 000 = none 001 = one option slots 010 = two option slots 011 = three option slots For Power Supplies: 000 = AC PSU 001 = DC PSU For SSL: 000 = server offloading 001 = end to end encryption For WSM: 000 = WSM mode 001 = ASFM mode For SF: 000 = 3200 card 001 = 9600 card For Copper Ethernet: 000: no POE 001: POE For FAN Tray: 000: CP 001: IO For Objects with no options: 000: CPU, Mezz, OPM, SAS, IPFIX g : Chassis type (4 bits, possibly MSB 2 bits are extension of field b) 0x0 = 00-00 = work-group (single card switches, etc) 0x1 = 00-01 = back-bone (chassis based products) 0x2 = 00-10 = MDA (option modules) 0x3 = 00-10 = mid-plane (chassis based products) h : Number of ports (binary representation obmited) (8 bits) (for ACIM/BFM cards, this is number of octapids/blackbirds/dea) 0x00 = no ports (CPs, SFs, PS's, etc) 0x01 = 1-port, 0x02 = 2-port, 0x04 = 4-port, 0x06 = 6-port, 0x08 = 8-port, 0x0c = 12-port, 0x10 = 16-port, 0x18 = 24-port, 0x22 = 36-port, 0x30 = 48-port, 0x40 = 64-port. 0x80 = 128-port. |
| STR rc2kCardFrontDescription | 1.3.6.1.4.1.2272.1.100.6.1.3 | DisplayString | read-only | description |
| INT rc2kCardFrontAdminStatus | 1.3.6.1.4.1.2272.1.100.6.1.4 | INTEGER | read-write | Used to indicate the administrative status of this card |
| INT rc2kCardFrontOperStatus | 1.3.6.1.4.1.2272.1.100.6.1.5 | INTEGER | read-only | Used to indicate the operational status of this card. |
| STR rc2kCardFrontSerialNum | 1.3.6.1.4.1.2272.1.100.6.1.6 | DisplayString | read-only | manufacturer serial number of card |
| STR rc2kCardFrontPartNumber | 1.3.6.1.4.1.2272.1.100.6.1.8 | DisplayString | read-only | manufacturer part number of card |
| STR rc2kCardFrontDateCode | 1.3.6.1.4.1.2272.1.100.6.1.9 | DisplayString | read-only | manufacturer date code |
| STR rc2kCardFrontDeviations | 1.3.6.1.4.1.2272.1.100.6.1.10 | DisplayString | read-only | deviations |
| MAC rc2kCardFrontMacAddr | 1.3.6.1.4.1.2272.1.100.6.1.11 | MacAddress | read-only | base mac address |
| INT rc2kCardBackType | 1.3.6.1.4.1.2272.1.100.6.1.12 | INTEGER | read-only | Refer to rc2kCardFrontType for the encoding scheme |
| STR rc2kCardBackDescription | 1.3.6.1.4.1.2272.1.100.6.1.13 | DisplayString | read-only | customer card description |
| STR rc2kCardBackSerialNum | 1.3.6.1.4.1.2272.1.100.6.1.14 | DisplayString | read-only | customer serial number of card |
| STR rc2kCardBackHwVersion | 1.3.6.1.4.1.2272.1.100.6.1.15 | DisplayString | read-only | hardware version |
| STR rc2kCardBackPartNumber | 1.3.6.1.4.1.2272.1.100.6.1.16 | DisplayString | read-only | customer part number |
| STR rc2kCardBackDateCode | 1.3.6.1.4.1.2272.1.100.6.1.17 | DisplayString | read-only | customer date code |
| STR rc2kCardBackDeviations | 1.3.6.1.4.1.2272.1.100.6.1.18 | DisplayString | read-only | customer deviations |
| STR rc2kCardASICDescr | 1.3.6.1.4.1.2272.1.100.6.1.21 | DisplayString | read-only | ASIC descriptor |
| T/F rc2kCardSmltOnSingleCpSupported | 1.3.6.1.4.1.2272.1.100.6.1.23 | TruthValue | read-only | Used to indicate whether an IO card is updated to support SMLT on single Cp feature or not. |
| INT rc2kCardSlotPriority | 1.3.6.1.4.1.2272.1.100.6.1.29 | INTEGER | read-write | Used to indicate the priority of the slot for power management. It will take effect only after reboot. |
| INT rc2kCardSlotOriginalPriority | 1.3.6.1.4.1.2272.1.100.6.1.30 | INTEGER | read-only | Priority of the slot for power management which the swtich has currently booted with. It will remain the same until the next reboot. |
| INT rc2kCardSlotPower | 1.3.6.1.4.1.2272.1.100.6.1.32 | INTEGER | read-write | Administrately turn on or off power on this slot. it only applicable on Standby CP & IO and SF Card |
| rc2kCopyFile | 1.3.6.1.4.1.2272.1.100.7 | |||
| OCT rc2kCopyFileSource | 1.3.6.1.4.1.2272.1.100.7.1 | OCTET STRING | read-write | source file |
| OCT rc2kCopyFileDestination | 1.3.6.1.4.1.2272.1.100.7.2 | OCTET STRING | read-write | dest file |
| INT rc2kCopyFileAction | 1.3.6.1.4.1.2272.1.100.7.3 | INTEGER | read-write | start or cancell |
| INT rc2kCopyFileResult | 1.3.6.1.4.1.2272.1.100.7.4 | INTEGER | read-only | result |
| rc2kQos | 1.3.6.1.4.1.2272.1.100.8 | |||
| rc2kQosIngressTagToQosTable | 1.3.6.1.4.1.2272.1.100.8.2 | not-accessible | This table is used to specify the 802.1P to QOS (802.1P->QOS) mapping on packet ingress. | |
| rc2kQosIngressTagToQosEntry | 1.3.6.1.4.1.2272.1.100.8.2.1 | not-accessible | Entry containing information of 8021P->Qos mapping | |
| INT rc2kQosIngressTagToQosRow | 1.3.6.1.4.1.2272.1.100.8.2.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosIngressTagToQosInIeee8021P | 1.3.6.1.4.1.2272.1.100.8.2.1.2 | INTEGER | read-only | 802.1P |
| INT rc2kQosIngressTagToQosQosLevel | 1.3.6.1.4.1.2272.1.100.8.2.1.3 | INTEGER | read-write | Qos level |
| rc2kQosEgressQosToTagTable | 1.3.6.1.4.1.2272.1.100.8.4 | not-accessible | This table is used to specify the QOS to 802.1P (QOS->802.1P) mapping on packet egress. | |
| rc2kQosEgressQosToTagEntry | 1.3.6.1.4.1.2272.1.100.8.4.1 | not-accessible | Entry containing information of Qos->Qos mapping | |
| INT rc2kQosEgressQosToTagRow | 1.3.6.1.4.1.2272.1.100.8.4.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosEgressQosToTagQosLevel | 1.3.6.1.4.1.2272.1.100.8.4.1.2 | INTEGER | read-only | qos level |
| INT rc2kQosEgressQosToTagOutIeee8021P | 1.3.6.1.4.1.2272.1.100.8.4.1.3 | INTEGER | read-write | 802.1P |
| rc2kQosTrafficProfileTable | 1.3.6.1.4.1.2272.1.100.8.6 | not-accessible | This table is used to specify traffic profiles for the system. These traffic profiles are used for policying purposes to guarantee streams of traffic do not egress the system above a certain rate. These traffic profiles are applied in the 'rcIpFilterTable'. | |
| rc2kQosTrafficProfileEntry | 1.3.6.1.4.1.2272.1.100.8.6.1 | not-accessible | Entry containing information of Qos->Qos mapping | |
| INT rc2kQosTrafficProfileId | 1.3.6.1.4.1.2272.1.100.8.6.1.1 | INTEGER | read-only | Profile id |
| STR rc2kQosTrafficProfileName | 1.3.6.1.4.1.2272.1.100.8.6.1.2 | DisplayString | read-write | Profile name |
| T/F rc2kQosTrafficProfileEnable | 1.3.6.1.4.1.2272.1.100.8.6.1.3 | TruthValue | read-write | Enable this entry |
| T/F rc2kQosTrafficProfileTranslateDscpEnable | 1.3.6.1.4.1.2272.1.100.8.6.1.4 | TruthValue | read-write | Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic profile will get translated to 'rc2kQosTrafficProfileInProfileDscp'. Packets that fall outside the traffic profile will get translated to 'rc2kQosTrafficProfileOutProfileDscp'. If disabled, no translation is performed. |
| STR rc2kQosTrafficProfileInProfileDscp | 1.3.6.1.4.1.2272.1.100.8.6.1.5 | DisplayString | read-write | Used to specify the DSCP value for 'good' packets. |
| STR rc2kQosTrafficProfileOutProfileDscp | 1.3.6.1.4.1.2272.1.100.8.6.1.6 | DisplayString | read-write | Used to specify the DSCP value for 'violation' packets. |
| T/F rc2kQosTrafficProfileDiscardEnable | 1.3.6.1.4.1.2272.1.100.8.6.1.7 | TruthValue | read-write | Used to specify whether packets that fall outside the traffic profile should be discarded. |
| I32 rc2kQosTrafficProfileAverageRate | 1.3.6.1.4.1.2272.1.100.8.6.1.8 | Integer32 | read-write | Average rate in packets per second. |
| ROW rc2kQosTrafficProfileRowStatus | 1.3.6.1.4.1.2272.1.100.8.6.1.10 | RowStatus | read-write | Used to create/delete entries. |
| rc2kQosIngressDscpToQosTable | 1.3.6.1.4.1.2272.1.100.8.7 | not-accessible | This table is used to specify the DSCP to QOS (Dscp->QOS) mapping on packet ingress. | |
| rc2kQosIngressDscpToQosEntry | 1.3.6.1.4.1.2272.1.100.8.7.1 | not-accessible | Entry containing information of Dscp->Qos mapping | |
| INT rc2kQosIngressDscpToQosRow | 1.3.6.1.4.1.2272.1.100.8.7.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosIngressDscpToQosInDscp | 1.3.6.1.4.1.2272.1.100.8.7.1.2 | INTEGER | read-only | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| STR rc2kQosIngressDscpToQosInDscpBinaryFormat | 1.3.6.1.4.1.2272.1.100.8.7.1.3 | DisplayString | read-only | The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order). |
| INT rc2kQosIngressDscpToQosQosLevel | 1.3.6.1.4.1.2272.1.100.8.7.1.4 | INTEGER | read-write | qos level |
| rc2kQosEgressQosToDscpTable | 1.3.6.1.4.1.2272.1.100.8.8 | not-accessible | This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress. | |
| rc2kQosEgressQosToDscpEntry | 1.3.6.1.4.1.2272.1.100.8.8.1 | not-accessible | Entry containing information of Qos->Qos mapping | |
| INT rc2kQosEgressQosToDscpRow | 1.3.6.1.4.1.2272.1.100.8.8.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosEgressQosToDscpQosLevel | 1.3.6.1.4.1.2272.1.100.8.8.1.2 | INTEGER | read-only | qos level |
| INT rc2kQosEgressQosToDscpOutDscp | 1.3.6.1.4.1.2272.1.100.8.8.1.3 | INTEGER | read-write | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| STR rc2kQosEgressQosToDscpOutDscpBinaryFormat | 1.3.6.1.4.1.2272.1.100.8.8.1.4 | DisplayString | read-only | The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order). |
| rc2kAtm | 1.3.6.1.4.1.2272.1.100.9 | |||
| rc2kAtmGlobal | 1.3.6.1.4.1.2272.1.100.9.1 | |||
| rc2kAtmPortTable | 1.3.6.1.4.1.2272.1.100.9.2 | not-accessible | ATM port table | |
| rc2kAtmPortEntry | 1.3.6.1.4.1.2272.1.100.9.2.1 | not-accessible | Entry containing information of ATM port | |
| NUM rc2kAtmPortIfIndex | 1.3.6.1.4.1.2272.1.100.9.2.1.1 | InterfaceIndex | read-only | port number |
| INT rc2kAtmPortNumVpiBits | 1.3.6.1.4.1.2272.1.100.9.2.1.2 | INTEGER | read-write | # of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object. |
| INT rc2kAtmPortNumVciBits | 1.3.6.1.4.1.2272.1.100.9.2.1.3 | INTEGER | read-write | # of vci bits |
| INT rc2kAtmPortMediaType | 1.3.6.1.4.1.2272.1.100.9.2.1.4 | INTEGER | read-only | media type |
| T/F rc2kAtmPortScrambleEnable | 1.3.6.1.4.1.2272.1.100.9.2.1.5 | TruthValue | read-write | enable scramble |
| INT rc2kAtmPortFramingMode | 1.3.6.1.4.1.2272.1.100.9.2.1.6 | INTEGER | read-write | port framing mode |
| INT rc2kAtmPortClockSource | 1.3.6.1.4.1.2272.1.100.9.2.1.7 | INTEGER | read-write | clock source |
| INT rc2kAtmPortLineSpeed | 1.3.6.1.4.1.2272.1.100.9.2.1.8 | INTEGER | read-only | line speed |
| INT rc2kAtmPortLoopBackMode | 1.3.6.1.4.1.2272.1.100.9.2.1.9 | INTEGER | read-write | loop back mode |
| MAC rc2kAtmPortMacAddress | 1.3.6.1.4.1.2272.1.100.9.2.1.10 | MacAddress | read-only | XLR assigned MAC addr |
| rc2kAtmPvcTable | 1.3.6.1.4.1.2272.1.100.9.3 | not-accessible | ATM Pvc table | |
| rc2kAtmPvcEntry | 1.3.6.1.4.1.2272.1.100.9.3.1 | not-accessible | Entry containing information of ATM Pvc | |
| NUM rc2kAtmPvcIfIndex | 1.3.6.1.4.1.2272.1.100.9.3.1.1 | InterfaceIndex | read-only | port number |
| INT rc2kAtmPvcVpi | 1.3.6.1.4.1.2272.1.100.9.3.1.2 | INTEGER | read-only | vpi of this pvc |
| INT rc2kAtmPvcVci | 1.3.6.1.4.1.2272.1.100.9.3.1.3 | INTEGER | read-only | vci of this pvc |
| I32 rc2kAtmPvcPvcId | 1.3.6.1.4.1.2272.1.100.9.3.1.4 | Integer32 | read-only | internal pvc id |
| STR rc2kAtmPvcName | 1.3.6.1.4.1.2272.1.100.9.3.1.5 | DisplayString | read-write | name of pvc |
| INT rc2kAtmPvcEncapsulation | 1.3.6.1.4.1.2272.1.100.9.3.1.6 | INTEGER | read-write | encapsulation |
| INT rc2kAtmPvcServiceType | 1.3.6.1.4.1.2272.1.100.9.3.1.7 | INTEGER | read-write | service type |
| INT rc2kAtmPvcPeakCellRate | 1.3.6.1.4.1.2272.1.100.9.3.1.8 | INTEGER | read-write | Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783. |
| INT rc2kAtmPvcSustainedCellRate | 1.3.6.1.4.1.2272.1.100.9.3.1.9 | INTEGER | read-write | Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783. |
| INT rc2kAtmPvcMaxBurstSize | 1.3.6.1.4.1.2272.1.100.9.3.1.10 | INTEGER | read-write | max burst size |
| ROW rc2kAtmPvcRowStatus | 1.3.6.1.4.1.2272.1.100.9.3.1.11 | RowStatus | read-write | row status |
| T/F rc2kAtmPvcOamLbMgmtEnable | 1.3.6.1.4.1.2272.1.100.9.3.1.12 | TruthValue | read-write | Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically |
| INT rc2kAtmPvcOamLbSendFrequency | 1.3.6.1.4.1.2272.1.100.9.3.1.13 | INTEGER | read-write | Number of seconds between transmitting OAM loopback request |
| INT rc2kAtmPvcOamLbRetryFrequency | 1.3.6.1.4.1.2272.1.100.9.3.1.14 | INTEGER | read-write | Number of seconds between retry |
| INT rc2kAtmPvcOamLbUpCount | 1.3.6.1.4.1.2272.1.100.9.3.1.15 | INTEGER | read-write | Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up |
| INT rc2kAtmPvcOamLbDownCount | 1.3.6.1.4.1.2272.1.100.9.3.1.16 | INTEGER | read-write | Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down. |
| T/F rc2kAtmPvcOamTrapEnable | 1.3.6.1.4.1.2272.1.100.9.3.1.17 | TruthValue | read-write | Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down. |
| INT rc2kAtmPvcOamVcStatus | 1.3.6.1.4.1.2272.1.100.9.3.1.18 | INTEGER | read-only | Indicate the status of PVC link. Not Managed--VC is not being managed by OAM. Down Verify --An OAM loopback failed. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really down. After down-count unsuccessful retries, the VC goes to the down state (see definition of rc2kAtmPvcOamLoopbackDownCount). Down --VC has not received responses to by end-to-end F5 OAM loopback cells. Up Verify -- An OAM loopback was successful. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really up. After up-count successive and successful loopback retries, the VC goes to the Up state (see definition of rc2kAtmPvcOamLoopbackUpCount). Up - End-to-end loopbacks are successful. |
| C32 rc2kAtmPvcOamLbRequestSent | 1.3.6.1.4.1.2272.1.100.9.3.1.19 | Counter32 | read-only | Number of OAM loopback request sent |
| C32 rc2kAtmPvcOamLbReplySent | 1.3.6.1.4.1.2272.1.100.9.3.1.20 | Counter32 | read-only | Number of OAM loopback reply sent |
| C32 rc2kAtmPvcOamLbReplyReceived | 1.3.6.1.4.1.2272.1.100.9.3.1.21 | Counter32 | read-only | Number of OAM loopback reply received |
| rc2kAtm1483ElanTable | 1.3.6.1.4.1.2272.1.100.9.5 | not-accessible | ATM 1483Elan table | |
| rc2kAtm1483ElanEntry | 1.3.6.1.4.1.2272.1.100.9.5.1 | not-accessible | Entry containing information of ATM 1483Elan | |
| NUM rc2kAtm1483ElanIfIndex | 1.3.6.1.4.1.2272.1.100.9.5.1.1 | InterfaceIndex | read-only | port number |
| I32 rc2kAtm1483ElanElanId | 1.3.6.1.4.1.2272.1.100.9.5.1.2 | Integer32 | read-only | Elan Id |
| INT rc2kAtm1483ElanNumPvcIds | 1.3.6.1.4.1.2272.1.100.9.5.1.3 | INTEGER | read-only | # pvc-ids in list |
| IDL rc2kAtm1483ElanPvcIds | 1.3.6.1.4.1.2272.1.100.9.5.1.4 | IdList | read-write | list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids. |
| I32 rc2kAtm1483ElanVlanId | 1.3.6.1.4.1.2272.1.100.9.5.1.5 | Integer32 | read-write | vlan tag for this 1483 |
| ROW rc2kAtm1483ElanRowStatus | 1.3.6.1.4.1.2272.1.100.9.5.1.6 | RowStatus | read-write | row status |
| INT rc2kAtm1483ElanConnectType | 1.3.6.1.4.1.2272.1.100.9.5.1.7 | INTEGER | read-write | connection type |
| MAC rc2kAtm1483ElanVlanMacAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.8 | MacAddress | read-only | mac for vlan |
| MAC rc2kAtm1483ElanDummyMacAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.9 | MacAddress | read-only | dummy mac for the other router |
| IP rc2kAtm1483ElanLocalIpAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.10 | IpAddress | read-write | local ip, if ConnectType is ip(2) |
| IP rc2kAtm1483ElanRemoteIpAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.11 | IpAddress | read-write | remote ip, if ConnectType is ip(2) |
| T/F rc2kAtm1483ElanInArpSendEnable | 1.3.6.1.4.1.2272.1.100.9.5.1.12 | TruthValue | read-write | enable arp sending on the port, if ConnectType is ip(2) |
| INT rc2kAtm1483ElanInArpSendInterval | 1.3.6.1.4.1.2272.1.100.9.5.1.13 | INTEGER | read-write | interval of arp sending on the port, if ConnectType is ip(2) |
| INT rc2kAtm1483ElanIpxVlanEncapMethod | 1.3.6.1.4.1.2272.1.100.9.5.1.14 | INTEGER | read-write | vlan encapsulation method, if ConnectType is ipx(3) |
| INT rc2kAtm1483ElanIpxNetworkNum | 1.3.6.1.4.1.2272.1.100.9.5.1.15 | INTEGER | read-write | network number, if ConnectType is ipx(3) |
| I32 rc2kAtm1483ElanStgId | 1.3.6.1.4.1.2272.1.100.9.5.1.16 | Integer32 | read-only | An identifier used to identify a STG in the device, only in bridge mode |
| I32 rc2kAtm1483ElanrcStgTaggedBpduVlanId | 1.3.6.1.4.1.2272.1.100.9.5.1.17 | Integer32 | read-only | The VLAN ID to be used for tagging BPDUs, only in bridge mode. |
| OCT rc2kAtm1483ElanIpxNetworkAddr | 1.3.6.1.4.1.2272.1.100.9.5.1.18 | OCTET STRING | read-write | network number, instead of rc2kAtm1483ElanIpxNetworkNum |
| rc2kAtmSioCardConfigTable | 1.3.6.1.4.1.2272.1.100.9.8 | not-accessible | 2kAtm Sio Card Config Table | |
| rc2kAtmSioCardConfigEntry | 1.3.6.1.4.1.2272.1.100.9.8.1 | not-accessible | Entry containing information of 2kAtm Sio Card Config. | |
| I32 rc2kAtmSioCardConfigSlotIndex | 1.3.6.1.4.1.2272.1.100.9.8.1.1 | Integer32 | read-only | slot Index. |
| INT rc2kAtmSioCardConfigAction | 1.3.6.1.4.1.2272.1.100.9.8.1.2 | INTEGER | read-write | |
| INT rc2kAtmSioCardConfigTraceMode | 1.3.6.1.4.1.2272.1.100.9.8.1.3 | INTEGER | read-write | |
| STR rc2kAtmSioCardConfigImageFileName | 1.3.6.1.4.1.2272.1.100.9.8.1.4 | DisplayString | read-only | ATM Image file name. |
| INT rc2kAtmSioCardConfigElanStatsEnable | 1.3.6.1.4.1.2272.1.100.9.8.1.5 | INTEGER | read-write | Enable/Disable Elan Statistics collection |
| INT rc2kAtmSioCardConfigStatsPollPeriod | 1.3.6.1.4.1.2272.1.100.9.8.1.6 | INTEGER | read-write | Time interval after which Elan statistics would be polled |
| rc2kAtmPortStatsTable | 1.3.6.1.4.1.2272.1.100.9.10 | not-accessible | ATM port statistics table | |
| rc2kAtmPortStatsEntry | 1.3.6.1.4.1.2272.1.100.9.10.1 | not-accessible | Entry containing information of ATM port statistics | |
| NUM rc2kAtmPortStatsIfIndex | 1.3.6.1.4.1.2272.1.100.9.10.1.1 | InterfaceIndex | read-only | port number |
| C64 rc2kAtmPortStatsInCells | 1.3.6.1.4.1.2272.1.100.9.10.1.2 | Counter64 | read-only | Number of Cells received from ATM interface |
| C64 rc2kAtmPortStatsOutCells | 1.3.6.1.4.1.2272.1.100.9.10.1.3 | Counter64 | read-only | Number of Cells transmitted by ATM interface |
| C64 rc2kAtmPortStatsOutIdleCells | 1.3.6.1.4.1.2272.1.100.9.10.1.4 | Counter64 | read-only | Number of Idle Cells transmitted |
| C32 rc2kAtmPortStatsInHecCorrected | 1.3.6.1.4.1.2272.1.100.9.10.1.5 | Counter32 | read-only | Number of received cells in which HCS was corrected |
| C32 rc2kAtmPortStatsInHecUncorrected | 1.3.6.1.4.1.2272.1.100.9.10.1.6 | Counter32 | read-only | Number of received cells dropped because HCS couldn't be corrected |
| C32 rc2kAtmPortStatsInUnknownProtos | 1.3.6.1.4.1.2272.1.100.9.10.1.7 | Counter32 | read-only | Number of received cells dropped with wrong VPI/VCI |
| C32 rc2kAtmPortStatsInPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.8 | Counter32 | read-only | Number of AAL5 CPCS PDUs received |
| C32 rc2kAtmPortStatsOutPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.9 | Counter32 | read-only | Number of AAL5 CPCS PDUs transmitted |
| C32 rc2kAtmPortStatsInDroppedPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.10 | Counter32 | read-only | Number of AAL5 CPCS PDUs dropped due to resource exhaustion |
| C32 rc2kAtmPortStatsOutDroppedPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.11 | Counter32 | read-only | Number of AAL5 CPCS PDUs dropped because the transmitter closed the channel |
| rc2kAtmVPortStatsTable | 1.3.6.1.4.1.2272.1.100.9.11 | not-accessible | ATM Elan statistics table | |
| rc2kAtmVPortStatsEntry | 1.3.6.1.4.1.2272.1.100.9.11.1 | not-accessible | Entry containing information of ATM Elan statistics | |
| NUM rc2kAtmVPortStatsIfIndex | 1.3.6.1.4.1.2272.1.100.9.11.1.1 | InterfaceIndex | read-only | port number |
| I32 rc2kAtmVPortStatsVlanId | 1.3.6.1.4.1.2272.1.100.9.11.1.2 | Integer32 | read-only | Vlan Id |
| INT rc2kAtmVPortStatsClear | 1.3.6.1.4.1.2272.1.100.9.11.1.3 | INTEGER | read-write | Clear Elan Stats |
| C64 rc2kAtmVPortStatsInOctets | 1.3.6.1.4.1.2272.1.100.9.11.1.4 | Counter64 | read-only | AAL5 CPCS PDU octects received from ATM interface |
| C64 rc2kAtmVPortStatsOutOctets | 1.3.6.1.4.1.2272.1.100.9.11.1.5 | Counter64 | read-only | AAL5 CPCS PDU octects transmitted out of ATM interface |
| C32 rc2kAtmVPortStatsInErrors | 1.3.6.1.4.1.2272.1.100.9.11.1.6 | Counter32 | read-only | AAL5 CPCS PDUs received with errors from ATM interface. These errors include CRC-32 errors,SAR time-out errors And oversized SDU errors |
| C32 rc2kAtmVPortStatsOutErrors | 1.3.6.1.4.1.2272.1.100.9.11.1.7 | Counter32 | read-only | Number of AAL5 CPCS PDUs that couldn't be transmitted due to errors |
| C32 rc2kAtmVPortStatsInDiscards | 1.3.6.1.4.1.2272.1.100.9.11.1.8 | Counter32 | read-only | Number of received AAL5 CPCS PDUs discarded |
| C32 rc2kAtmVPortStatsOutDiscards | 1.3.6.1.4.1.2272.1.100.9.11.1.9 | Counter32 | read-only | Number of AAL5 CPCS PDUs which are to be transmitted but discarded |
| C32 rc2kAtmVPortStatsInUcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.10 | Counter32 | read-only | Received ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| C32 rc2kAtmVPortStatsOutUcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.11 | Counter32 | read-only | Forwarded ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| C32 rc2kAtmVPortStatsInMulticastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.12 | Counter32 | read-only | Received ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case of IP ELAN type) |
| C32 rc2kAtmVPortStatsOutMulticastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.13 | Counter32 | read-only | Forwarded ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case of IP ELAN type) |
| C32 rc2kAtmVPortStatsInBroadcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.14 | Counter32 | read-only | Received ethernet/IP/IPX packets whose destination address in broadcast address |
| C32 rc2kAtmVPortStatsOutBroadcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.15 | Counter32 | read-only | Forwarded ethernet/IP/IPX packets whose destination address in broadcast address |
| rc2kCpuEthernetPortIpv6RouteTable | 1.3.6.1.4.1.2272.1.100.13 | not-accessible | 2k CPU Ethernet Port Route table for Ipv6 | |
| rc2kCpuEthernetPortIpv6RouteEntry | 1.3.6.1.4.1.2272.1.100.13.1 | not-accessible | Entry containing information of 2k CPU Ethernet Port Ipv6 | |
| ADR rc2kCpuEthernetPortIpv6RouteNetwork | 1.3.6.1.4.1.2272.1.100.13.1.1 | Ipv6Address | not-accessible | Used to configure the ipv6 network that can be used to remotely manage this device. |
| INT rc2kCpuEthernetPortIpv6RoutePrefixLength | 1.3.6.1.4.1.2272.1.100.13.1.2 | INTEGER | not-accessible | The length of the prefix (in bits). |
| ADR rc2kCpuEthernetPortIpv6RouteGateway | 1.3.6.1.4.1.2272.1.100.13.1.3 | Ipv6Address | not-accessible | Used to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic. |
| ROW rc2kCpuEthernetPortIpv6RouteRowStatus | 1.3.6.1.4.1.2272.1.100.13.1.4 | RowStatus | read-create | row status |
| rc2kPowerConsumptionInfoTable | 1.3.6.1.4.1.2272.1.100.17 | not-accessible | Power consumption info table for all slots | |
| rc2kPowerConsumptionInfoEntry | 1.3.6.1.4.1.2272.1.100.17.1 | not-accessible | Entry containing power consumption information of the slot | |
| I32 rc2kPowerConsumptionInfoIndex | 1.3.6.1.4.1.2272.1.100.17.1.1 | Integer32 | not-accessible | Slot number. |
| INT rc2kPowerConsumptionInfoPowerStatus | 1.3.6.1.4.1.2272.1.100.17.1.2 | INTEGER | read-only | Power operation status of this slot |
| I32 rc2kPowerConsumptionInfoBasePower | 1.3.6.1.4.1.2272.1.100.17.1.3 | Integer32 | read-only | The base power required for this slot |
| I32 rc2kPowerConsumptionInfoConsumedPower | 1.3.6.1.4.1.2272.1.100.17.1.4 | Integer32 | read-only | The actual consumed power of this slot. Value will be set zero when Power status is 'off' rc2kPowerConsumptionInfoPowerStatus |
| INT rc2kPowerConsumptionInfoPowerPriority | 1.3.6.1.4.1.2272.1.100.17.1.5 | INTEGER | read-only | Used to indicate the priority of the slot for power management |
| STR rc2kPowerConsumptionInfoSlotDescription | 1.3.6.1.4.1.2272.1.100.17.1.6 | DisplayString | read-only | User to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc |
| STR rc2kPowerConsumptionInfoCardDescription | 1.3.6.1.4.1.2272.1.100.17.1.7 | DisplayString | read-only | Hardware description of this card |
| rc2kTemperatureTable | 1.3.6.1.4.1.2272.1.100.18 | not-accessible | Table for retrieving the temperatures of each card (CP, IO, SF) on the chassis | |
| rc2kTemperatureEntry | 1.3.6.1.4.1.2272.1.100.18.1 | not-accessible | Contains information regarding the temperature of each slot (CP, IO and SF) on the chassis | |
| I32 rc2kTemperatureSlotIndex | 1.3.6.1.4.1.2272.1.100.18.1.1 | Integer32 | not-accessible | Slot number of either a CP (1,2) or IO (3-12) or SF (21-26). |
| STR rc2kTemperatureSlotDescription | 1.3.6.1.4.1.2272.1.100.18.1.2 | DisplayString | read-only | Used to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc. |
| G32 rc2kTemperatureZone1Temperature | 1.3.6.1.4.1.2272.1.100.18.1.3 | Gauge32 | read-only | Zone 1 temperature measured in celsius degree |
| G32 rc2kTemperatureZone2Temperature | 1.3.6.1.4.1.2272.1.100.18.1.4 | Gauge32 | read-only | Zone 2 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 2 is not available on this slot. |
| G32 rc2kTemperatureZone3Temperature | 1.3.6.1.4.1.2272.1.100.18.1.5 | Gauge32 | read-only | Zone 3 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 3 is not available on this slot. |
| G32 rc2kTemperatureZone4Temperature | 1.3.6.1.4.1.2272.1.100.18.1.6 | Gauge32 | read-only | Zone 4 temperature measured in celsius degree |
| G32 rc2kTemperatureZone5Temperature | 1.3.6.1.4.1.2272.1.100.18.1.7 | Gauge32 | read-only | Zone 5 2 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 5 is not available on this slot. |
| G32 rc2kTemperatureHighTemperature | 1.3.6.1.4.1.2272.1.100.18.1.8 | Gauge32 | read-only | Highest temperature measured in celsius degree |
| G32 rc2kTemperatureLowTemperature | 1.3.6.1.4.1.2272.1.100.18.1.9 | Gauge32 | read-only | Lowest temperature measured in celsius degree |
| G32 rc2kTemperatureAlarmThreshold | 1.3.6.1.4.1.2272.1.100.18.1.10 | Gauge32 | read-only | When the card temperature crosses this threshold, an alarm will be set. |
| G32 rc2kTemperatureShutdownThreshold | 1.3.6.1.4.1.2272.1.100.18.1.11 | Gauge32 | read-only | When the card temperature crosses this threshold, the card will be shutdown. |
| rcPowerRanger | 1.3.6.1.4.1.2272.1.202 | |||
| rcPowerRangerMib | 1.3.6.1.4.1.2272.1.202.1 | |||
| rcPowerRangerNotifications | 1.3.6.1.4.1.2272.1.202.1.0 | |||
| rcPowerRangerObjects | 1.3.6.1.4.1.2272.1.202.1.1 | |||
| rcPrQos | 1.3.6.1.4.1.2272.1.202.1.1.1 | |||
| rcPrQosScalars | 1.3.6.1.4.1.2272.1.202.1.1.1.1 | |||
| INT rcPrQosPolicyNumPolicies | 1.3.6.1.4.1.2272.1.202.1.1.1.1.1 | INTEGER | read-only | A list of Global Policer (GPID) entries. The number of entries is given by rcPrQosPolicyNumPolicies. |
| INT rcPrQosTxQueueNumTemplates | 1.3.6.1.4.1.2272.1.202.1.1.1.1.2 | INTEGER | read-only | The number of egress queue templates currently defined in the switch. |
| T/F rcPrQosFlowPolicerStatsClear | 1.3.6.1.4.1.2272.1.202.1.1.1.1.3 | TruthValue | read-write | Clear all box-wide policer statistics. |
| I32 rcPrQosLossless8021p | 1.3.6.1.4.1.2272.1.202.1.1.1.1.4 | Integer32 | read-write | The value used to map Ingress IEEE 1p to lossless internal Qos when lossless Ethernet mode is enabled. |
| T/F rcPrQosLosslessPfcEnabled | 1.3.6.1.4.1.2272.1.202.1.1.1.1.5 | TruthValue | read-only | If true then at least one lossless port in the switch has been configured with the value of rcPortLosslessEnetPauseType set to pfc(2). If false then either all lossless ports are currently in fc(1) mode, or no ports are configured in lossless mode. |
| POR rcPrQosLosslessPortsEnablePending | 1.3.6.1.4.1.2272.1.202.1.1.1.1.6 | PortSet | read-write | This object is used to inform the system which ports are pending lossless enable and is for internal use. |
| STR rcPrQosLosslessPortsOperPending | 1.3.6.1.4.1.2272.1.202.1.1.1.1.7 | DisplayString | read-only | Indicates which ports which would be brought down operationally if the set of ports indicated in rcPrQosLosslessPortsEnablePending are configured for lossless operation. |
| rcPrQosPolicyTable | 1.3.6.1.4.1.2272.1.202.1.1.1.2 | not-accessible | A list of GPID entries. The number of entries is given by rcPrQosPolicyNumPolicies. | |
| rcPrQosPolicyEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1 | not-accessible | Entry containing configuration information for a particular global policer. | |
| INT rcPrQosPolicyGpId | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1 | INTEGER | read-only | A value that uniquely identifies Global Policer associated with this entry. |
| STR rcPrQosPolicyName | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2 | DisplayString | read-write | An administratively-assigned name for this Global Policer. |
| INT rcPrQosPolicyPeakRate | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3 | INTEGER | read-write | Global Policer Peak Rate in Kilobit/sec. |
| INT rcPrQosPolicySvcRate | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4 | INTEGER | read-write | Global Policer Service Rate in Kilobit/sec. |
| LAN rcPrQosPolicyLaneMembers | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5 | LaneSet | read-write | The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot has 4 laneIds. When a bit has the value one(1), the corresponding laneId is a member of the set. When a bit has the value zero(0), the corresponding laneId is not a member of the set. The encoding is such that the most significant bit of octet #1 corresponds to laneId 0, while the least significant bit of octet #4 corresponds to laneId 31. |
| ROW rcPrQosPolicyRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosLocalPolicyTable | 1.3.6.1.4.1.2272.1.202.1.1.1.3 | not-accessible | A list of policer entries. | |
| rcPrQosLocalPolicyEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1 | not-accessible | An entry containing configuration information for a particular local policer. This field will return 0 for CB as tap.lane.lpid is not used. | |
| INT rcPrQosLocalPolicyGpId | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1 | INTEGER | read-only | A value of Global Policer ID corresponding to this local policer. |
| I32 rcPrQosLocalPolicyIndex | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2 | Integer32 | read-only | The slot number of the VSP chassis on which stats are collected. Valid slots are IO slots which are in slots 3 to 12. |
| INT rcPrQosLocalPolicyPeakRate | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3 | INTEGER | read-only | Global Peak Rate in Kilobit/sec. |
| INT rcPrQosLocalPolicySvcRate | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4 | INTEGER | read-only | Global Policer Service Rate in Kilobit/sec. |
| C64 rcPrQosLocalPolicyTotalPkts | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5 | Counter64 | read-only | Global Policer Total Packets Count. |
| C64 rcPrQosLocalPolicyTotalBytes | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6 | Counter64 | read-only | Global Policer Total Bytes Count. |
| C64 rcPrQosLocalPolicyBytesOverPeak | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7 | Counter64 | read-only | Global Policer Bytes over Peak Rate Count. |
| C64 rcPrQosLocalPolicyBytesOverSvc | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8 | Counter64 | read-only | Global Policer Bytes over Service Rate Count. |
| C64 rcPrQosLocalPolicyTotalPktsDropped | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9 | Counter64 | read-only | The count of Global Policer Total Packets dropped due to reasons other than policing, e.g. congestion. |
| OCT rcPrQosLocalPolicyLaneMember | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10 | OCTET STRING | read-only | The lane that this Gpid has a local policing account on |
| C64 rcPrQosLocalPolicyGreenPackets | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.11 | Counter64 | read-only | The total number of packets received that were below committed rate. |
| C64 rcPrQosLocalPolicyGreenBytes | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.12 | Counter64 | read-only | The total number of bytes received that were below the committed rate. |
| C64 rcPrQosLocalPolicyYellowPackets | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.13 | Counter64 | read-only | The total number of packets received that were above the committed rate but below the peak rate. |
| C64 rcPrQosLocalPolicyYellowBytes | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.14 | Counter64 | read-only | The total number of bytes received that were above the committed rate but below the peak rate. |
| C64 rcPrQosLocalPolicyRedPackets | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.15 | Counter64 | read-only | The total number of packets received that were above the peak rate. |
| C64 rcPrQosLocalPolicyRedBytes | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.16 | Counter64 | read-only | The total number of bytes received that were above the peak rate. |
| T/F rcPrQosLocalPolicyStatsClear | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.17 | TruthValue | read-write | Clear Qos Policy statistics. |
| rcPrQosTxQueueTemplateTable | 1.3.6.1.4.1.2272.1.202.1.1.1.4 | not-accessible | A list of egress queue templates. The number of templates is given by rcPrQosTxQueueNumTemplates. | |
| rcPrQosTxQueueTemplateEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1 | not-accessible | Entry containing configuration information for a particular egress queue template. Queue is a set of egress queues. | |
| INT rcPrQosTxQueueTemplateId | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1 | INTEGER | read-only | A value that uniquely identifies Egress Queue Template. |
| STR rcPrQosTxQueueTemplateName | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2 | DisplayString | read-write | An administratively-assigned name for this egress Queue Template. |
| INT rcPrQosTxQueueTemplateMaxQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3 | INTEGER | read-create | Maximum number of queues in this Template. |
| INT rcPrQosTxQueueTemplateBalancedQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4 | INTEGER | read-write | Total number of Balanced Queues in this Template. |
| INT rcPrQosTxQueueTemplateHiPriQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5 | INTEGER | read-write | Total number of High Priority Queues in this Template. |
| INT rcPrQosTxQueueTemplateLoPriQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6 | INTEGER | read-write | Total number of Low Priority Queues in this Template. |
| I32 rcPrQosTxQueueTemplateTotalQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7 | Integer32 | read-only | Total number of queues in this Template. |
| OCT rcPrQosTxQueueTemplateBalancedQList | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8 | OCTET STRING | read-only | List of Balanced Queues in this Template. |
| OCT rcPrQosTxQueueTemplateHiPriQList | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9 | OCTET STRING | read-only | List of High Priority Queues in this Template. |
| OCT rcPrQosTxQueueTemplateLoPriQList | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10 | OCTET STRING | read-only | List of Low Priority Queues in this Template. |
| OCT rcPrQosTxQueueTemplateTotalQLists | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11 | OCTET STRING | read-only | List of Total Physical Queues in this Template. |
| INT rcPrQosTxQueueTemplateMinRateTotal | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12 | INTEGER | read-only | Sum of minimum rate guarantees for this template. |
| INT rcPrQosTxQueueTemplateMaxRateHiPri | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13 | INTEGER | read-only | Sum of maximum rate guarantees for high priority queues of this template. |
| POR rcPrQosTxQueueTemplatePortMembers | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14 | PortSet | read-write | Port members of this template. |
| INT rcPrQosTxQueueTemplateFlags | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15 | INTEGER | read-write | Bitset indicated template state. |
| T/F rcPrQosTxQueueTemplateApply | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16 | TruthValue | read-write | When apply is issued by the administrator, the Egress Queue Set attributes are committed. |
| ROW rcPrQosTxQueueTemplateRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosTxQueueTable | 1.3.6.1.4.1.2272.1.202.1.1.1.5 | not-accessible | A list of elementary Egress queue entries. | |
| rcPrQosTxQueueEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1 | not-accessible | Entry containing configuration information for a particular elementary egress queue. | |
| INT rcPrQosTxQueueTid | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1 | INTEGER | read-write | Template ID of the template this queue belongs to. |
| INT rcPrQosTxQueueQid | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2 | INTEGER | read-only | Queue Offset from the base queue for this port. |
| STR rcPrQosTxQueueName | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3 | DisplayString | read-write | An NNSC name for this egress queue. Allowed only for 8 NNSC queues. |
| INT rcPrQosTxQueueStyle | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4 | INTEGER | read-write | Egress queue style. |
| I32 rcPrQosTxQueueWeight | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5 | Integer32 | read-only | Egress queue weight. Applicable for balanced queues and lo-pri queues only. |
| I32 rcPrQosTxQueueMaxRate | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6 | Integer32 | read-write | Egress queue maximum rate, Kbs |
| I32 rcPrQosTxQueueMinRate | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7 | Integer32 | read-write | Egress queue minimun rate guarantee, Kbs. Applicable for balanced queues and lo-pri queues only. |
| I32 rcPrQosTxQueueBquantum | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8 | Integer32 | read-only | Bandwidth allocation unit. Applicable for balanced queues and lo-pri queues only. |
| I32 rcPrQosTxQueueMaxLength | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9 | Integer32 | read-write | Maximum queue length. |
| INT rcPrQosTxQueueWredCurveSet | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10 | INTEGER | read-write | Random Early Detection Number. |
| ROW rcPrQosTxQueueRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosTxQueueStatsTable | 1.3.6.1.4.1.2272.1.202.1.1.1.6 | not-accessible | A list of elementary Egress queue stats entries. | |
| rcPrQosTxQueueStatsEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1 | not-accessible | Entry containing statistics information for a particular elementary egress queue. | |
| NUM rcPrQosTxQueueStatsPort | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1 | InterfaceIndex | read-only | Port index of the stats table. |
| INT rcPrQosTxQueueStatsQid | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2 | INTEGER | read-only | Queue Offset from the base queue for this port. |
| C64 rcPrQosTxQueueStatsTotalPages | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3 | Counter64 | read-only | Total pages offered to the queue. |
| C64 rcPrQosTxQueueStatsDroppedPages | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4 | Counter64 | read-only | Total pages dropped by the queue. |
| INT rcPrQosTxQueueStatsUtilization | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5 | INTEGER | read-only | Utilization percentage of the queue. |
| rcPrQosIngressExpToQosTable | 1.3.6.1.4.1.2272.1.202.1.1.1.7 | not-accessible | This table is used to specify the Mpls EXP to QOS (Exp bit->QOS) mapping on packet ingress. | |
| rcPrQosIngressExpToQosEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1 | not-accessible | Entry containing information of Exp bit->Qos mapping | |
| INT rcPrQosIngressExpToQosIndex | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1 | INTEGER | not-accessible | Used to uniquely identify a row in this table. |
| ROW rcPrQosIngressExpToQosRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosEgressQosToExpTable | 1.3.6.1.4.1.2272.1.202.1.1.1.8 | not-accessible | This table is used to specify the QOS to Mpls EXP bit field (QOS->Exp bit) mapping on packet egress. | |
| rcPrQosEgressQosToExpEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1 | not-accessible | Entry containing information of Qos->Exp bit mapping | |
| INT rcPrQosEgressQosToExpIndex | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1 | INTEGER | not-accessible | Used to uniquely identify a row in this table. |
| ROW rcPrQosEgressQosToExpRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilter | 1.3.6.1.4.1.2272.1.202.1.1.2 | |||
| rcPrFilterScalars | 1.3.6.1.4.1.2272.1.202.1.1.2.1 | |||
| INT rcPrFilterAclTableSize | 1.3.6.1.4.1.2272.1.202.1.1.2.1.2 | INTEGER | read-only | Used to indicate the number of Acl entries in the rcPrFilterAclTable. Default table size is 0 until the administrator configures any Acl entries. |
| INT rcPrFilterAceTableSize | 1.3.6.1.4.1.2272.1.202.1.1.2.1.3 | INTEGER | read-only | Used to indicate the number of Ace entries in the rcPrFilterAceTable. Default table size is 0 until the administrator configures any Ace entries. The maximum size is # of Acls multiplied by # of Aces. |
| T/F rcPrFilterAclBufferWrap | 1.3.6.1.4.1.2272.1.202.1.1.2.1.4 | TruthValue | read-write | Used to enable or disable buffer wrapping for filters log. |
| T/F rcPrFilterAclClearLog | 1.3.6.1.4.1.2272.1.202.1.1.2.1.5 | TruthValue | read-write | Used to clear the filter Logs collected. |
| rcPrFilterAct | 1.3.6.1.4.1.2272.1.202.1.1.2.2 | |||
| rcPrFilterActTable | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1 | not-accessible | A table of Acts to store information of each Act entry. This table is indexed by the Act Id. | |
| rcPrFilterActEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1 | not-accessible | One Act Entry holding Act information. | |
| INT rcPrFilterActId | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1 | INTEGER | read-only | A table of Acts to store information of each Act. This table is indexed by the Act Id. |
| STR rcPrFilterActName | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2 | DisplayString | read-write | A descriptive name chosen by the administrator for the Act Entry. |
| INT rcPrFilterActArpAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3 | INTEGER | read-write | Value is one or multiple (logical 'OR' of the following): none(0), operation(1) none: No Arp Attrs are selected or to clear other choices. operation: Only valid option for Arp attributes. |
| INT rcPrFilterActEthernetAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4 | INTEGER | read-write | Value is one or multiple of the following: none(0), srcMac(1), dstMac(2), etherType(4), port(8), vlan(16), vlanTagPrio(32) none: If selected then unselect all other selections. |
| INT rcPrFilterActIpAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5 | INTEGER | read-write | Value is one or multiple of the following: none(0), srcIp(1), dstIp(2), ipFragFlag(4), ipOptions(8), ipProtoType(16), dscp(32) none: If selected then unselect all other selections. |
| INT rcPrFilterActProtocolAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6 | INTEGER | read-write | Value is one or multiple of the following: none(0), tcpSrcPort(1), udpSrcPort(2), tcpDstPort(4), udpDstPort(8), tcpFlags(16), icmpMsgType(32) none: If selected then unselect all other selections. |
| T/F rcPrFilterActApply | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7 | TruthValue | read-write | When apply is issued by the administrator, the ACT attributes cannot be modified. |
| ROW rcPrFilterActRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8 | RowStatus | read-write | Create/delete operations for this entry. The entry cannot be modified or deleted while there are Acls configured with this Act entry. |
| INT rcPrFilterActIpv6Attrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9 | INTEGER | read-write | Value is one or multiple of the following: none(0), srcIpv6(1), dstIpv6(4), nextHdr(16), none: If selected then unselect all other selections. |
| rcPrFilterActPatternTable | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2 | not-accessible | A table of user-defined parameters of Acls to store information of each Acl. This table is indexed by the Act Id and PatternIndex. | |
| rcPrFilterActPatternEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1 | not-accessible | Entry containing Configuration information for a particular Act. | |
| INT rcPrFilterActPatternActId | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1 | INTEGER | read-only | An index to the ActPatternEntry, a unique identifier for Act entry in the range of Table Size. |
| INT rcPrFilterActPatternIndex | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2 | INTEGER | read-only | Indexes each user defined field pattern in an Acl entry. In this release only 3 patterns are allowed per ACT but we can have multiple patterns per ACL. |
| STR rcPrFilterActPatternName | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator for the Acl Pattern Entry. |
| INT rcPrFilterActPatternBase | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4 | INTEGER | read-write | User defined fields from headers to be used in the Aces of the Acl. |
| INT rcPrFilterActPatternOffset | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5 | INTEGER | read-write | Set Offset in bytes to the beginning offset of the user defined field with selected header option as base. |
| INT rcPrFilterActPatternLength | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6 | INTEGER | read-write | The number of bytes to extract beginning from the offset is set in rcPrFilterActPatternLength. Only 1-15 are valid. |
| ROW rcPrFilterActPatternRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAcl | 1.3.6.1.4.1.2272.1.202.1.1.2.3 | |||
| rcPrFilterAclTable | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1 | not-accessible | A table of Acls to store information of each Acl. This table is indexed by the Acl Id. | |
| rcPrFilterAclEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1 | not-accessible | Entry containing Configuration information for a particular Acl. | |
| INT rcPrFilterAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1 | INTEGER | read-only | A unique identifier for Acl entry in the range of Table Size. |
| STR rcPrFilterAclName | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator for the Acl Entry. |
| INT rcPrFilterAclType | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4 | INTEGER | read-write | An Acl can be vlan-based or port-based. An Ace has a capability to match packets classified as 'ingress' and 'egress'. An ingress packet is assigned a value 'in' and an egress packet is assigned a value 'out'. |
| INT rcPrFilterAclAceListSize | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5 | INTEGER | read-only | Indicates the number of Aces in a particular Acl. |
| INT rcPrFilterAclDefaultAction | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6 | INTEGER | read-write | Indicates action to be taken when none of the Aces in the Acl match. |
| ENA rcPrFilterAclState | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8 | EnableValue | read-write | Enables/Disables the state of all Aces in the Acl |
| IDL rcPrFilterAclVlanList | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9 | IdList | read-write | An array used to indicate all the VLANs to be associated with this Acl Entry. At present, only 4k Vlans are supported. |
| POR rcPrFilterAclPortList | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10 | PortSet | read-write | Indicates the ports to be added to this Acl Entry. |
| ROW rcPrFilterAclRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11 | RowStatus | read-write | Create/delete operations for the entry. Deleting a non-empty Acl results in deletion of member Aces and then the Acl. |
| INT rcPrFilterAclNumVlanIds | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12 | INTEGER | read-only | Used to Indicate the number of VLAN ID's that are stored in the rcPrFilterAclVlanList. |
| INT rcPrFilterAclPktType | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13 | INTEGER | read-write | Indicates the packet type that thsi ACL is applicable to. |
| INT rcPrFilterAclControlPktRule | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14 | INTEGER | read-write | When the rcPrFilterAclDefaultAction object is set to deny then control packets follow this rule. Otherwise, the object value can be ignored. |
| I32 rcPrFilterAclVlanId | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15 | Integer32 | read-write | Destination Vlan Id for mirroring the packets. The value 0 means no vlan is being mirrored. When the value of rcPrFilterAclVlanId is non-zero, the values of rcPrFilterAclMltId and rcPrFilterAclDstPortList must be 0. |
| I32 rcPrFilterAclMltId | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16 | Integer32 | read-write | Destination Mlt Id for mirroring the packets. The value 0 means no mlt is being mirrored. When the value of rcPrFilterAclMltId is non-zero, the values of rcPrFilterAclVlanId and rcPrFilterAclDstPortList must be 0. |
| POR rcPrFilterAclDstPortList | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17 | PortSet | read-write | Destination Port List for mirroring the packets. The value 0 means no port(s) is being mirrored. When the value of rcPrFilterAclDstPortList is non-zero, the values of rcPrFilterAclVlanId and rcPrFilterAclMltId must be 0. |
| ENA rcPrFilterAclIpfixState | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18 | EnableValue | read-write | Value indicating whether ipfix option on the Acl is enabled. |
| rcPrFilterAclStatsTable | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2 | not-accessible | A table of Acls Statistics entries to store the Default Acl statistics for each Acl. This table is indexed by the Acl Id. | |
| rcPrFilterAclStatsEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1 | not-accessible | Entry containing default statistics information for a particular Acl. | |
| INT rcPrFilterAclStatsAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1 | INTEGER | read-only | A unique identifier for Acl entry in the range of Table Size. |
| T/F rcPrFilterAclStatsClear | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4 | TruthValue | read-write | Clear default statistics for ACL Filters. |
| C64 rcPrFilterAclStatsMatchDefaultSecurityPkts | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.5 | Counter64 | read-only | Security packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| C64 rcPrFilterAclStatsMatchDefaultSecurityOctets | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.6 | Counter64 | read-only | Security octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| C64 rcPrFilterAclStatsMatchDefaultQosPkts | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.7 | Counter64 | read-only | QOS packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| C64 rcPrFilterAclStatsMatchDefaultQosOctets | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.8 | Counter64 | read-only | QOS octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| C64 rcPrFilterAclStatsMatchGlobalSecurityPkts | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.9 | Counter64 | read-only | Security packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| C64 rcPrFilterAclStatsMatchGlobalSecurityOctets | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.10 | Counter64 | read-only | Security octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| C64 rcPrFilterAclStatsMatchGlobalQosPkts | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.11 | Counter64 | read-only | QOS packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| C64 rcPrFilterAclStatsMatchGlobalQosOctets | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.12 | Counter64 | read-only | QOS octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| rcPrFilterAce | 1.3.6.1.4.1.2272.1.202.1.1.2.4 | |||
| rcPrFilterAceTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1 | not-accessible | A table of Aces to store information of each Ace in context of its parent Acl. This is indexed by AclId and AceId. | |
| rcPrFilterAceEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1 | not-accessible | One Ace entry holding Ace information. Ace is a member of one Acl. | |
| INT rcPrFilterAceAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1 | INTEGER | read-only | An index to the AceEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2 | INTEGER | read-only | AceId uniquely identifies one Ace entry. |
| STR rcPrFilterAceName | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| INT rcPrFilterAceMode | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4 | INTEGER | read-write | Operating Mode associated with the Ace is effective on the packets matching this Ace. |
| INT rcPrFilterAceRemarkDscp | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5 | INTEGER | read-write | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to mark specific diffserv class traffic. Set the field value to desired integer dscp code for rcPrFilterAceRemarkDscp field to mark non-standard traffic classes and local use PHBs. |
| INT rcPrFilterAceRemarkDot1Priority | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6 | INTEGER | read-write | Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P. |
| IP rcPrFilterAceRedirectNextHop | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7 | IpAddress | read-write | Redirect matching IP traffic to the next hop. |
| INT rcPrFilterAceRedirectUnreach | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8 | INTEGER | read-write | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| INT rcPrFilterAcePolice | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9 | INTEGER | read-write | Policing profile Identifier. Set the desired policing profile identifier. Set the value to 0 when policing is not desired. |
| ENA rcPrFilterAceAdminState | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10 | EnableValue | read-write | Value indicating whether the Ace is enabled. An Ace can only be modified if it is disabled. |
| INT rcPrFilterAceOperState | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11 | INTEGER | read-only | The current operational state of the Ace. |
| INT rcPrFilterAceMltIndex | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18 | INTEGER | read-write | If this action is specified, it will basically override the mlt-index picked by the mlt algorithm, when a packet is being sent out on MLT ports. |
| ROW rcPrFilterAceRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19 | RowStatus | read-write | Create/delete operations for this entry. |
| ENA rcPrFilterAceIpfixState | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20 | EnableValue | read-write | Value indicating whether ipfix option on the Ace is enabled. |
| ADR rcPrFilterAceRedirectNextHopIpv6 | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21 | Ipv6Address | read-write | Redirect matching IPv6 traffic to the next hop. |
| POR rcPrFilterAceDstPortList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22 | PortSet | read-create | Destination Port List for mirroring the packets. |
| I32 rcPrFilterAceDstVlanId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23 | Integer32 | read-create | Destination Vlan to mirror the packets. |
| I32 rcPrFilterAceDstMltId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24 | Integer32 | read-create | Destination Mlt to mirror the packets. |
| I32 rcPrFilterAceInternalQos | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25 | Integer32 | read-write | Internal QOS Level assigned to the packet flow DefVal = 8 is disable |
| ENA rcPrFilterAceCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26 | EnableValue | read-write | Value indicating whether Count option on the Ace is enabled. |
| ENA rcPrFilterAceLog | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27 | EnableValue | read-write | Value indicating whether log option on the Ace is enabled. |
| ENA rcPrFilterAceCopytoPcap | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28 | EnableValue | read-write | Value indicating whether copy to pcap option on the Ace is enabled. |
| IP rcPrFilterAceDstIp | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29 | IpAddress | read-write | Destination IP address to mirror the packets. |
| I32 rcPrFilterAceDstIpTtl | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30 | Integer32 | read-write | Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl. |
| INT rcPrFilterAceDstIpDscp | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31 | INTEGER | read-write | Dscp value for the mirrored packet when mirror destination is IP. The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to mark specific diffserv class traffic. Set the field value to desired integer dscp code for rcPrFilterAceIpDscp field to mark non-standard traffic classes and local use PHBs. |
| rcPrFilterAceEthSrcAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2 | not-accessible | A table of Aces to store Ethernet Source MAC Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthSrcAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1 | not-accessible | One Ace entry holding Ace Ethernet Source MAC Address information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthSrcAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.1 | INTEGER | read-only | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthSrcAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.2 | INTEGER | read-only | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceEthSrcAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.3 | OCTET STRING | read-write | The list of ethernet source address to match. |
| INT rcPrFilterAceEthSrcAddrListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ethernet src address. |
| INT rcPrFilterAceEthSrcAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.5 | INTEGER | read-write | Operators for Ace Ethernet Source MAC Address. |
| ROW rcPrFilterAceEthSrcAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| STR rcPrFilterAceEthSrcAddrOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.7 | DisplayString | read-write | The Mac Address mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthSrcAddrOper is set to 'eq'. In case of the prefix '0x' is specified, 14 charaters is max length |
| rcPrFilterAceEthDstAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3 | not-accessible | A table of Aces to store Ethernet Destination MAC Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthDstAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1 | not-accessible | One Ace entry holding Ace Ethernet Destination MAC Address information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthDstAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.1 | INTEGER | read-only | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthDstAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.2 | INTEGER | read-only | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceEthDstAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.3 | OCTET STRING | read-write | List of ethernet destination address to match. |
| INT rcPrFilterAceEthDstAddrListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ethernet dst address. |
| INT rcPrFilterAceEthDstAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.5 | INTEGER | read-write | Operators for Ace Ethernet Destination MAC Address. |
| ROW rcPrFilterAceEthDstAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| STR rcPrFilterAceEthDstAddrOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.7 | DisplayString | read-write | The Mac Address mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthDstAddrOper is set to 'eq'. In case of the prefix '0x' is specified, 14 charaters is max length |
| rcPrFilterAceEthEtherTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4 | not-accessible | A table of Aces to store Ethernet Ether Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthEtherEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1 | not-accessible | One Ace entry holding Ace Ethernet Ether information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthEtherAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.1 | INTEGER | read-only | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthEtherAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.2 | INTEGER | read-only | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceEthEtherTypeList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.3 | OCTET STRING | read-write | EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. The EtherType for 802.1Q tagged frames is 0x8100. Valid range for the 16-bit Ether-type is 0..65535 and the attribute supports lists/ranges of values. Invalid ether-type value 65536 is interpreted as field is not desired in match criteria. |
| INT rcPrFilterAceEthEtherTypeListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ethernet types. |
| INT rcPrFilterAceEthEtherTypeOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.5 | INTEGER | read-write | Ethernet Type Operators. |
| ROW rcPrFilterAceEthEtherRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceEthVlanTagPrioTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5 | not-accessible | A table of Aces to store Ethernet Vlan Tag Priority Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthVlanTagPrioEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1 | not-accessible | One Ace entry holding Ace Ethernet Vlan Tag Priority information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthVlanTagPrioAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.1 | INTEGER | read-only | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthVlanTagPrioAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.2 | INTEGER | read-only | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthVlanTagPrioVlanTagPrio | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.3 | INTEGER | read-write | Priority bits (3-bit field) from the 802.1Q/p tag. |
| INT rcPrFilterAceEthVlanTagPrioOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.4 | INTEGER | read-write | Operators for Ace Ethernet Vlan Tag Priority. |
| ROW rcPrFilterAceEthVlanTagPrioRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.5 | RowStatus | read-write | Create/delete operations for this entry. |
| I32 rcPrFilterAceEthVlanTagPrioOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.6 | Integer32 | read-write | The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not for ERS8600 |
| rcPrFilterAceEthPortTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.6 | not-accessible | A table of Aces to store Ethernet Port Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthPortEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1 | not-accessible | One Ace entry holding Ace Ethernet Port information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthPortAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.1 | INTEGER | read-only | An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthPortAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.2 | INTEGER | read-only | An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| POR rcPrFilterAceEthPortPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.3 | PortSet | read-write | Port Number or Port List to match on. |
| INT rcPrFilterAceEthPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.4 | INTEGER | read-write | Operator for Ace Ethernet Port. |
| ROW rcPrFilterAceEthPortRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.5 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceEthVlanIdTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7 | not-accessible | A table of Aces to store Ethernet Vlan Id Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthVlanIdEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1 | not-accessible | One Ace entry holding Ace Ethernet Vlan Id information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthVlanIdAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.1 | INTEGER | read-only | An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthVlanIdAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.2 | INTEGER | read-only | An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size. |
| IDL rcPrFilterAceEthVlanIdVlanIdList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.3 | IdList | read-write | Vlan Id to match on. This is a ERS 8600 supported object. VSP9000 uses rcPrFilterAceEthVlanIdVlanId instead |
| INT rcPrFilterAceEthVlanIdOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.4 | INTEGER | read-write | Operator for Ace Ethernet VlanId. |
| ROW rcPrFilterAceEthVlanIdRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.5 | RowStatus | read-write | Create/delete operations for this entry. |
| I32 rcPrFilterAceEthVlanIdOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.6 | Integer32 | read-write | The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlanId in VSP 9000 to replace rcPrFilterAceEthVlanIdVlanIdList |
| INT rcPrFilterAceEthVlanIdVlanId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.7 | INTEGER | read-write | Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList |
| rcPrFilterAceArpTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8 | not-accessible | A table of Aces to store Arp Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceArpEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1 | not-accessible | One Ace entry holding Ace Arp Header information. Ace is a member of one Acl. | |
| INT rcPrFilterAceArpAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.1 | INTEGER | read-only | An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceArpAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.2 | INTEGER | read-only | An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceArpType | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.3 | INTEGER | read-write | Ace Arp Operation. |
| INT rcPrFilterAceArpOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.4 | INTEGER | read-write | Operator for Ace Arp Operation. |
| INT rcPrFilterAceArpValue | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.5 | INTEGER | read-write | Ace Arp can be a request or a response. |
| ROW rcPrFilterAceArpRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceIpSrcAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9 | not-accessible | A table of Aces to store IP Source Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpSrcAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1 | not-accessible | One Ace entry holding Ace IP Source Address Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpSrcAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.1 | INTEGER | read-only | An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpSrcAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.2 | INTEGER | read-only | An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpSrcAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.5 | INTEGER | read-write | Operators for Ace Ip Source Address. |
| ROW rcPrFilterAceIpSrcAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| IP rcPrFilterAceIpSrcAddrIpAddr | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.7 | IpAddress | read-write | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| IP rcPrFilterAceIpSrcAddrOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.8 | IpAddress | read-write | The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected. |
| rcPrFilterAceIpDstAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10 | not-accessible | A table of Aces to store IP Destination Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpDstAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1 | not-accessible | One Ace entry holding Ace IP Destination Address Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpDstAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.1 | INTEGER | read-only | An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpDstAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.2 | INTEGER | read-only | An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpDstAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.5 | INTEGER | read-write | Operators for Ace IP Destination Address. |
| ROW rcPrFilterAceIpDstAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| IP rcPrFilterAceIpDstAddrIpAddr | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.7 | IpAddress | read-write | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| IP rcPrFilterAceIpDstAddrOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.8 | IpAddress | read-write | The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected. |
| rcPrFilterAceIpDscpTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11 | not-accessible | A table of Aces to store IP Dscp Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpDscpEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1 | not-accessible | One Ace entry holding Ace IP Dscp Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpDscpAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.1 | INTEGER | read-only | An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpDscpAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.2 | INTEGER | read-only | An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceIpDscpList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.3 | OCTET STRING | read-write | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to match specific diffserv class traffic. Set the field value to desired dscp code for 'rcPrFilterAceIpDscp' field to match non-standard traffic classes and local use PHBs. |
| INT rcPrFilterAceIpDscpListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the dscp values. |
| INT rcPrFilterAceIpDscpOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.5 | INTEGER | read-write | Operators for Ace Ip Dscp. |
| ROW rcPrFilterAceIpDscpRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| I32 rcPrFilterAceIpDscpOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.7 | Integer32 | read-write | The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDscpOper is set ro eq |
| rcPrFilterAceIpProtoTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12 | not-accessible | A table of Aces to store IP Proto Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpProtoEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1 | not-accessible | One Ace entry holding Ace IP Proto Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpProtoAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.1 | INTEGER | read-only | An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpProtoAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.2 | INTEGER | read-only | An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceIpProtoList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.3 | OCTET STRING | read-write | Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired protocol number is not available in the enumerated list set protocol to desired integer value |
| INT rcPrFilterAceIpProtoListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ethernet protocol ids. |
| INT rcPrFilterAceIpProtoOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.5 | INTEGER | read-write | Operators for Ace Ip Protocols. |
| ROW rcPrFilterAceIpProtoRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceIpOptionsTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.13 | not-accessible | A table of Aces to store IP Options Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpOptionsEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1 | not-accessible | One Ace entry holding Ace IP Options Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpOptionsAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.1 | INTEGER | read-only | An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpOptionsAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.2 | INTEGER | read-only | An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpOptionsOptions | 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.3 | INTEGER | read-write | Ip options to be matched from the IP Header. |
| INT rcPrFilterAceIpOptionsOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.4 | INTEGER | read-write | Logical Operator - only 'any' is valid at present. |
| ROW rcPrFilterAceIpOptionsRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.5 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceIpFragTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.14 | not-accessible | A table of Aces to store IP Fragmentation Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpFragEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1 | not-accessible | One Ace entry holding Ace IP Fragmentation Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpFragAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.1 | INTEGER | read-only | An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpFragAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.2 | INTEGER | read-only | An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpFragFragmentation | 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.3 | INTEGER | read-write | Ip Fragmentation bits to be matched from the IP Header. |
| INT rcPrFilterAceIpFragOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.4 | INTEGER | read-write | Operator for Ip fragmentation. |
| ROW rcPrFilterAceIpFragRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.5 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceProtoTcpSrcPortTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15 | not-accessible | A table of Aces to store TCP Source Port information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoTcpSrcPortEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1 | not-accessible | One entry holding Ace Protocol TCP Source Port information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoTcpSrcPortAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.1 | INTEGER | read-only | An index to the AceProtoTcpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoTcpSrcPortAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.2 | INTEGER | read-only | An index to the AceProtoTcpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoTcpSrcPortPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.3 | OCTET STRING | read-write | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoTcpSrcPortCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the TCP source port. |
| INT rcPrFilterAceProtoTcpSrcPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.5 | INTEGER | read-write | Operator for Ace Protocol TcpSrcPort. |
| ROW rcPrFilterAceProtoTcpSrcPortRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceProtoUdpSrcPortTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16 | not-accessible | A table of Aces to store UDP Source Port information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoUdpSrcPortEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1 | not-accessible | One entry holding Ace Protocol UDP Source Port information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoUdpSrcPortAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.1 | INTEGER | read-only | An index to the AceProtoUdpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoUdpSrcPortAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.2 | INTEGER | read-only | An index to the AceProtoUdpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoUdpSrcPortPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.3 | OCTET STRING | read-write | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoUdpSrcPortCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the UDP source port. |
| INT rcPrFilterAceProtoUdpSrcPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.5 | INTEGER | read-write | Operator for Ace Protocol UdpSrcPort. |
| ROW rcPrFilterAceProtoUdpSrcPortRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceProtoTcpDstPortTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17 | not-accessible | A table of Aces to store TCP Dest Port information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoTcpDstPortEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1 | not-accessible | One entry holding Ace Protocol TCP Dest Port information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoTcpDstPortAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.1 | INTEGER | read-only | An index to the AceProtoTcpDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoTcpDstPortAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.2 | INTEGER | read-only | An index to the AceProtoTcpDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoTcpDstPortPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.3 | OCTET STRING | read-write | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoTcpDstPortCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the TCP dest port. |
| INT rcPrFilterAceProtoTcpDstPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.5 | INTEGER | read-write | Operator for Ace Protocol TcpDstPort. |
| ROW rcPrFilterAceProtoTcpDstPortRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceProtoUdpDstPortTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18 | not-accessible | A table of Aces to store UDP Dest Port information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoUdpDstPortEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1 | not-accessible | One entry holding Ace Protocol UDP Dest Port information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoUdpDstPortAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.1 | INTEGER | read-only | An index to the AceProtoUdpDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoUdpDstPortAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.2 | INTEGER | read-only | An index to the AceProtoUdpDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoUdpDstPortPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.3 | OCTET STRING | read-write | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoUdpDstPortCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the UDP dest port. |
| INT rcPrFilterAceProtoUdpDstPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.5 | INTEGER | read-write | Operator for Ace Protocol UdpDstPort. |
| ROW rcPrFilterAceProtoUdpDstPortRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceProtoIcmpMsgTypeTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19 | not-accessible | A table of Aces to store ICMP message type information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoIcmpMsgTypeEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1 | not-accessible | One entry holding Ace ICMP message type information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoIcmpMsgTypeAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.1 | INTEGER | read-only | An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoIcmpMsgTypeAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.2 | INTEGER | read-only | An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoIcmpMsgTypeList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.3 | OCTET STRING | read-write | One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved). |
| INT rcPrFilterAceProtoIcmpMsgTypeCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ICMP message types. |
| INT rcPrFilterAceProtoIcmpMsgTypeOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.5 | INTEGER | read-write | Operator for Ace Protocol IcmpMsgTypes. |
| ROW rcPrFilterAceProtoIcmpMsgTypeRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceProtoTcpFlagsTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20 | not-accessible | A table of Aces to store TCP Flags information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoTcpFlagsEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1 | not-accessible | One entry holding Ace Protocol TCP flags information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoTcpFlagsAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.1 | INTEGER | read-only | An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoTcpFlagsAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.2 | INTEGER | read-only | An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoTcpFlagsList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.3 | OCTET STRING | read-write | One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 63 |
| INT rcPrFilterAceProtoTcpFlagsCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the TCP flags. |
| INT rcPrFilterAceProtoTcpFlagsOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.5 | INTEGER | read-write | Operator for Ace Protocol TcpFlags. |
| ROW rcPrFilterAceProtoTcpFlagsRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| I32 rcPrFilterAceProtoTcpFlagsOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.7 | Integer32 | read-write | The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAceProtoTcpFlagsOper is set to eq |
| rcPrFilterAcePattern1Table | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21 | not-accessible | A table of pattern fields for Aces to manage the settings for each user defined field. | |
| rcPrFilterAcePattern1Entry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1 | not-accessible | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. | |
| INT rcPrFilterAcePattern1AclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.1 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAcePattern1AceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.2 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| STR rcPrFilterAcePattern1Name | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| OCT rcPrFilterAcePattern1Value | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.4 | OCTET STRING | read-write | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength. |
| INT rcPrFilterAcePattern1Oper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.5 | INTEGER | read-write | Operators for Ace Pattern. |
| ROW rcPrFilterAcePattern1RowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAcePattern2Table | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22 | not-accessible | A table of pattern fields for Aces to manage the settings for each user defined field. | |
| rcPrFilterAcePattern2Entry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1 | not-accessible | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. | |
| INT rcPrFilterAcePattern2AclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.1 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAcePattern2AceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.2 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| STR rcPrFilterAcePattern2Name | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| OCT rcPrFilterAcePattern2Value | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.4 | OCTET STRING | read-write | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength. |
| INT rcPrFilterAcePattern2Oper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.5 | INTEGER | read-write | Operators for Ace Pattern. |
| ROW rcPrFilterAcePattern2RowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAcePattern3Table | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23 | not-accessible | A table of pattern fields for Aces to manage the settings for each user defined field. | |
| rcPrFilterAcePattern3Entry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1 | not-accessible | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. | |
| INT rcPrFilterAcePattern3AclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.1 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAcePattern3AceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.2 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| STR rcPrFilterAcePattern3Name | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| OCT rcPrFilterAcePattern3Value | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.4 | OCTET STRING | read-write | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength. |
| INT rcPrFilterAcePattern3Oper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.5 | INTEGER | read-write | Operators for Ace Pattern. |
| ROW rcPrFilterAcePattern3RowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceStatsTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24 | not-accessible | A table of ACE Statistics Entries to store per-ACE-per-Port Statistics | |
| rcPrFilterAceStatsEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1 | not-accessible | Ace Statistics entry holding per-ACE-per-port Statistics | |
| INT rcPrFilterAceStatsAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.1 | INTEGER | read-only | An index to the AceStatsEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceStatsAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.2 | INTEGER | read-only | An index to the AceStatsEntry, a unique identifier for ACE entry in the range of Table Size. |
| INT rcPrFilterAceStatsPortId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.3 | INTEGER | read-only | An index to the AceStatsEntry, a unique identifier of the portId. This object is not being used in VSP 9000. It should be alway in VVSP 9000 |
| C64 rcPrFilterAceStatsMatchCountPkts | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.4 | Counter64 | read-only | Count of packets that match this particular Ace on this particular port. |
| C64 rcPrFilterAceStatsMatchCountOctets | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.5 | Counter64 | read-only | Byte count of traffic that match this particular Ace on this particular port |
| T/F rcPrFilterAceStatsClear | 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.6 | TruthValue | read-write | Clear Per-ACE-Per-Port statistics. |
| rcPrFilterAceEthShowTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25 | not-accessible | A table of Aces to store Ethernet Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthShowEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1 | not-accessible | One Ace entry holding Ace Ethernet information. Ace is a member of one Acl. | |
| INT rcPrFilterAceEthShowAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.1 | INTEGER | read-only | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthShowAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.2 | INTEGER | read-only | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceEthShowSrcAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.3 | OCTET STRING | read-only | The list of ethernet source address to match. |
| INT rcPrFilterAceEthShowSrcAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.4 | INTEGER | read-only | Operators for Ace Ethernet Source MAC Address. |
| OCT rcPrFilterAceEthShowDstAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.5 | OCTET STRING | read-only | List of ethernet destination address to match. |
| INT rcPrFilterAceEthShowDstAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.6 | INTEGER | read-only | Operators for Ace Ethernet Destination MAC Address. |
| OCT rcPrFilterAceEthShowEtherTypeList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.7 | OCTET STRING | read-only | EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. The EtherType for 802.1Q tagged frames is 0x8100. Valid range for the 16-bit Ether-type is 0..65535 and the attribute supports lists/ranges of values. Invalid ether-type value 65536 is interpreted as field is not desired in match criteria. |
| INT rcPrFilterAceEthShowEtherTypeOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.8 | INTEGER | read-only | Ethernet Type Operators. |
| INT rcPrFilterAceEthShowVlanTagPrio | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.9 | INTEGER | read-only | Priority bits (3-bit field) from the 802.1Q/p tag. |
| INT rcPrFilterAceEthShowVlanTagPrioOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.10 | INTEGER | read-only | Operators for Ace Ethernet Vlan Tag Priority. |
| POR rcPrFilterAceEthShowPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.11 | PortSet | read-only | Port Number or Port List to match on. |
| INT rcPrFilterAceEthShowPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.12 | INTEGER | read-only | Operator for Ace Ethernet Port. |
| INT rcPrFilterAceEthShowVlanIdOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.14 | INTEGER | read-only | Operator for Ace Ethernet VlanId. |
| STR rcPrFilterAceEthShowSrcAddrOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.15 | DisplayString | read-only | The mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthDstAddrOper is set to 'eq'. In case of the prefix '0x' is specified, 14 charaters is max length |
| STR rcPrFilterAceEthShowDstAddrOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.16 | DisplayString | read-only | The mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthDstAddrOper is set to 'eq'. In case of the prefix '0x' is specified, 14 charaters is max length |
| I32 rcPrFilterAceEthShowVlanTagPrioOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.17 | Integer32 | read-only | The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not for ERS8600 |
| I32 rcPrFilterAceEthShowVlanIdOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.18 | Integer32 | read-only | The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlanId in VSP 9000 to replace rcPrFilterAceEthVlanIdVlanIdList |
| INT rcPrFilterAceEthShowVlanId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.19 | INTEGER | read-only | Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList |
| rcPrFilterAceIpShowTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26 | not-accessible | A table of Aces to store IP Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpShowEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1 | not-accessible | One Ace entry holding Ace IP information. Ace is a member of one Acl. | |
| INT rcPrFilterAceIpShowAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.1 | INTEGER | read-only | An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpShowAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.2 | INTEGER | read-only | An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpShowSrcAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.4 | INTEGER | read-only | Operators for Ace Ip Source Address. |
| INT rcPrFilterAceIpShowDstAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.6 | INTEGER | read-only | Operators for Ace Ip Destination Address. |
| OCT rcPrFilterAceIpShowDscpList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.7 | OCTET STRING | read-only | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to match specific diffserv class traffic. Set the field value to desired dscp code for 'rcPrFilterAceIpDscp' field to match non-standard traffic classes and local use PHBs. |
| INT rcPrFilterAceIpShowDscpOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.8 | INTEGER | read-only | Operators for Ace Ip Dscp. |
| OCT rcPrFilterAceIpShowProtoList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.9 | OCTET STRING | read-only | Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired protocol number is not available in the enumerated list set protocol to desired integer value |
| INT rcPrFilterAceIpShowProtoOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.10 | INTEGER | read-only | Operators for Ace Ip Protocols. |
| INT rcPrFilterAceIpShowOptions | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.11 | INTEGER | read-only | Ip options to be matched from the IP Header. |
| INT rcPrFilterAceIpShowOptionsOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.12 | INTEGER | read-only | Logical Operator - only 'any' is valid at present. |
| INT rcPrFilterAceIpShowFragmentation | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.13 | INTEGER | read-only | Ip Fragmentation bits to be matched from the IP Header. |
| INT rcPrFilterAceIpShowFragOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.14 | INTEGER | read-only | Operator for Ip fragmentation. |
| IP rcPrFilterAceIpShowSrcAddrIpAddr | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.15 | IpAddress | read-only | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| IP rcPrFilterAceIpShowSrcAddrOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.16 | IpAddress | read-only | The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected. |
| IP rcPrFilterAceIpShowDstAddrIpAddr | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.17 | IpAddress | read-only | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| IP rcPrFilterAceIpShowDstAddrOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.18 | IpAddress | read-only | The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected. |
| I32 rcPrFilterAceIpShowDscpOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.19 | Integer32 | read-only | The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDscpOper is set ro eq |
| rcPrFilterAceProtoShowTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27 | not-accessible | A table of Aces to store Protocol Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoShowEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1 | not-accessible | One Ace entry holding Ace Ethernet information. Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoShowAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.1 | INTEGER | read-only | An index to the AceProtoShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoShowAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.2 | INTEGER | read-only | An index to the AceProtoShowEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoShowIcmpMsgTypeList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.11 | OCTET STRING | read-only | One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved). |
| INT rcPrFilterAceProtoShowIcmpMsgTypeOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.12 | INTEGER | read-only | Operator for Ace Protocol IcmpMsgTypes. |
| OCT rcPrFilterAceProtoShowTcpFlagsList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.13 | OCTET STRING | read-only | One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 63 |
| INT rcPrFilterAceProtoShowTcpFlagsOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.14 | INTEGER | read-only | Operator for Ace Protocol TcpFlags. |
| OCT rcPrFilterAceProtoShowSrcPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.15 | OCTET STRING | read-only | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoShowSrcPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.16 | INTEGER | read-only | Operator for Ace Protocol SrcPort. |
| I32 rcPrFilterAceProtoShowSrcPortOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.17 | Integer32 | read-only | The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoSrcPortOper is set to 'range'. ('range' is not supported in this 3.0 release). If it is used as range high value, it should be displayed in decimal formtat. This object will be set to 0 when rcPrFilterAceProtoSrcPortOper is set to 'eq' |
| OCT rcPrFilterAceProtoShowDstPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.18 | OCTET STRING | read-only | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoShowDstPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.19 | INTEGER | read-only | Operator for Ace Protocol DstPort. |
| I32 rcPrFilterAceProtoShowDstPortOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.20 | Integer32 | read-only | The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoDstPortOper is set to 'range'. ('range' is not supported in this 3.0 release). If it is used as range high value, it should be displayed in decimal formtat. This object will be set to 0 when rcPrFilterAceProtoDstPortOper is set to 'eq' |
| I32 rcPrFilterAceProtoShowTcpFlagsOperMask | 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.21 | Integer32 | read-only | The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAceProtoTcpFlagsOper is set to eq |
| rcPrFilterAcePatternShowTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28 | not-accessible | A table of Aces to store Pattern 1, 2, 3 Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAcePatternShowEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1 | not-accessible | One Ace entry holding Ace Pattern 1, 2, 3 information. Ace is a member of one Acl. | |
| INT rcPrFilterAcePatternShowAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.1 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAcePatternShowAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.2 | INTEGER | read-only | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| STR rcPrFilterAcePatternShowPattern1Name | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.3 | DisplayString | read-only | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| OCT rcPrFilterAcePatternShowPattern1Value | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.4 | OCTET STRING | read-only | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength. |
| INT rcPrFilterAcePatternShowPattern1Oper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.5 | INTEGER | read-only | Operators for Ace Pattern. |
| STR rcPrFilterAcePatternShowPattern2Name | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.6 | DisplayString | read-only | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| OCT rcPrFilterAcePatternShowPattern2Value | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.7 | OCTET STRING | read-only | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength. |
| INT rcPrFilterAcePatternShowPattern2Oper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.8 | INTEGER | read-only | Operators for Ace Pattern. |
| STR rcPrFilterAcePatternShowPattern3Name | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.9 | DisplayString | read-only | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| OCT rcPrFilterAcePatternShowPattern3Value | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.10 | OCTET STRING | read-only | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength. |
| INT rcPrFilterAcePatternShowPattern3Oper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.11 | INTEGER | read-only | Operators for Ace Pattern. |
| rcPrFilterAceIpv6SrcAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29 | not-accessible | A table of Aces to store IPv6 Source Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpv6SrcAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1 | not-accessible | One Ace entry holding Ace IPv6 Source Address Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpv6SrcAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.1 | INTEGER | read-only | An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpv6SrcAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.2 | INTEGER | read-only | An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceIpv6SrcAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.3 | OCTET STRING | read-write | The list of ipv6 source address to match from IPv6 header. |
| INT rcPrFilterAceIpv6SrcAddrListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ipv6 src address. |
| INT rcPrFilterAceIpv6SrcAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.5 | INTEGER | read-write | Operators for Ace Ipv6 Source Address. |
| ROW rcPrFilterAceIpv6SrcAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.6 | RowStatus | read-create | Create/delete operations for this entry. |
| rcPrFilterAceIpv6DstAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30 | not-accessible | A table of Aces to store IPv6 Destination Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpv6DstAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1 | not-accessible | One Ace entry holding Ace IPv6 Destination Address Header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpv6DstAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.1 | INTEGER | read-only | An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpv6DstAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.2 | INTEGER | read-only | An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceIpv6DstAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.3 | OCTET STRING | read-write | The list of ipv6 dst address to match from IPv6 header. |
| INT rcPrFilterAceIpv6DstAddrListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the IPv6 Destination Address. |
| INT rcPrFilterAceIpv6DstAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.5 | INTEGER | read-write | Operators for Ace IPv6 Destination Address. |
| ROW rcPrFilterAceIpv6DstAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.6 | RowStatus | read-create | Create/delete operations for this entry. |
| rcPrFilterAceIpv6NextHdrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.31 | not-accessible | A table of Aces to store IPv6 Next header Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpv6NextHdrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1 | not-accessible | One Ace entry holding Ace IPv6 Next header information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceIpv6NextHdrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.1 | INTEGER | read-only | An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpv6NextHdrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.2 | INTEGER | read-only | An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size. |
| IPV rcPrFilterAceIpv6NextHdrNextHdr | 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.3 | Ipv6NextHdr | read-write | The ipv6 next header to look for. |
| INT rcPrFilterAceIpv6NextHdrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.4 | INTEGER | read-write | Operators for Ace IPv6 Next header. |
| ROW rcPrFilterAceIpv6NextHdrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.5 | RowStatus | read-create | Create/delete operations for this entry. |
| rcPrFilterAceIpv6ShowTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32 | not-accessible | A table of Aces to display ipv6 information of each Ace in context of its parent Acl. | |
| rcPrFilterAceIpv6ShowEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1 | not-accessible | One Ace entry holding Ace ipv6 information. Ace is a member of one Acl. | |
| INT rcPrFilterAceIpv6ShowAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.1 | INTEGER | read-only | An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceIpv6ShowAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.2 | INTEGER | read-only | An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceIpv6ShowSrcAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.3 | OCTET STRING | read-only | The list of v6 source address to display. |
| INT rcPrFilterAceIpv6ShowSrcAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.4 | INTEGER | read-only | Operators for Ace v6 Source Address. |
| OCT rcPrFilterAceIpv6ShowDstAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5 | OCTET STRING | read-only | List of v6 destination address to display. |
| INT rcPrFilterAceIpv6ShowDstAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.6 | INTEGER | read-only | Operators for Ace v6 Destination Address. |
| IPV rcPrFilterAceIpv6ShowNxtHdrNxtHdr | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.7 | Ipv6NextHdr | read-only | v6 next hdr to display. |
| INT rcPrFilterAceIpv6ShowNxtHdrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.8 | INTEGER | read-only | Operator for Ace v6 next hdr. |
| rcPrFilterAceProtoSrcPortTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33 | not-accessible | A table of Aces to store TCP/UDP Source Port information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoSrcPortEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1 | not-accessible | One entry holding Ace Protocol TCP/UDP Source Port information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoSrcPortAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.1 | INTEGER | read-only | An index to the AceProtoSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoSrcPortAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.2 | INTEGER | read-only | An index to the AceProtoSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoSrcPortPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.3 | OCTET STRING | read-write | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoSrcPortCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the TCP source port. |
| INT rcPrFilterAceProtoSrcPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.5 | INTEGER | read-write | Operator for Ace Protocol SrcPort. |
| ROW rcPrFilterAceProtoSrcPortRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| I32 rcPrFilterAceProtoSrcPortOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.7 | Integer32 | read-write | The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoSrcPortOper is set to 'range'. ('range' is not supported in this 3.0 release). If it is used as range high value, it should be displayed in decimal formtat. This object will be set to 0 when rcPrFilterAceProtoSrcPortOper is set to 'eq' |
| rcPrFilterAceProtoDstPortTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34 | not-accessible | A table of Aces to store TCP Dest Port information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoDstPortEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1 | not-accessible | One entry holding Ace Protocol TCP Dest Port information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoDstPortAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.1 | INTEGER | read-only | An index to the AceProtoDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoDstPortAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.2 | INTEGER | read-only | An index to the AceProtoDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| OCT rcPrFilterAceProtoDstPortPort | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.3 | OCTET STRING | read-write | Port Number or Port List to match on. |
| INT rcPrFilterAceProtoDstPortCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the TCP dest port. |
| INT rcPrFilterAceProtoDstPortOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.5 | INTEGER | read-write | Operator for Ace Protocol DstPort. |
| ROW rcPrFilterAceProtoDstPortRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| I32 rcPrFilterAceProtoDstPortOperMaskRange | 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.7 | Integer32 | read-write | The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoDstPortOper is set to 'range'. ('range' is not supported in this 3.0 release). If it is used as range high value, it should be displayed in decimal formtat. This object will be set to 0 when rcPrFilterAceProtoDstPortOper is set to 'eq' |
| rcPrFilterAceProtoTcpOptionTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.35 | not-accessible | A table of Aces to store TCP Option information of each Ace in context of its parent Acl. | |
| rcPrFilterAceProtoTcpOptionEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1 | not-accessible | One entry holding Ace Protocol TCP option information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceProtoTcpOptionAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.1 | INTEGER | read-only | An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceProtoTcpOptionAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.2 | INTEGER | read-only | An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Ace entry in the range of Table Size. |
| INT rcPrFilterAceProtoTcpOptionHeader | 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.3 | INTEGER | read-write | TCP options to be matched from the TCP Header. 1 No-Operation 2 MaximumSegmentSize 3 WSOPT - Window Scale 4 SACK Permitted 5 SACK 8 TSOPT - Time Stamp Option 9 Partial Order Connection Permitted 10 Partial Order Service Profile 11 CC 12 CC.NEW 13 CC.ECHO 14 TCP Alternate Checksum Request 15 TCP Alternate Checksum Data 19 MD5 Signature Option 27 Quick-Start Response 28 User Timeout Option |
| INT rcPrFilterAceProtoTcpOptionOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.4 | INTEGER | read-write | Logical Operator - only 'any' is valid at present. |
| ROW rcPrFilterAceProtoTcpOptionRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.5 | RowStatus | read-write | Create/delete operations for this entry. |
| rcVrf | 1.3.6.1.4.1.2272.1.203 | |||
| rcVrfMib | 1.3.6.1.4.1.2272.1.203.1 | |||
| rcVrfNotifications | 1.3.6.1.4.1.2272.1.203.1.0 | |||
| rcVrfObjects | 1.3.6.1.4.1.2272.1.203.1.1 | |||
| rcVrfConfig | 1.3.6.1.4.1.2272.1.203.1.1.1 | |||
| rcVrfConfigScalars | 1.3.6.1.4.1.2272.1.203.1.1.1.1 | |||
| OID rcVrfConfigNextAvailableVrfId | 1.3.6.1.4.1.2272.1.203.1.1.1.1.1 | VrfIdentifier | read-only | The next available Virtual Router Id (index). This object provides a hint for the rcVrfId value to use when administratively creating a new rcVrfConfigEntry. A GET of this object returns the next available rcVrfId value to be used to create an entry in the associated rcVrfConfigTable; or zero, if no valid rcVrfId value is available. A value of zero(0) indicates that it is not possible to create a new rcVrfConfigEntry. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. Unless specified otherwise by its MAX-ACCESS and DESCRIPTION clauses, an object of this type is read-only, and a SET of such an object returns a notWritable error. |
| rcVrfConfigTable | 1.3.6.1.4.1.2272.1.203.1.1.1.2 | not-accessible | This table is for creating the new Virtual Routers. | |
| rcVrfConfigEntry | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1 | not-accessible | The entries in this table can be added/deleted using the rcVrfRowStatus. | |
| OID rcVrfId | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1 | VrfIdentifier | not-accessible | The unique id of this virtual router instance. A Virtual Router cannot not be created with rcVrfId = 0. VRFID 0 is reserved for the Administrative VRF. |
| ROW rcVrfRowStatus | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2 | RowStatus | read-create | The status column has three defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. |
| STR rcVrfName | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3 | DisplayString | read-write | The Name of the Virtual Router. |
| STR rcVrfContextName | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4 | SnmpAdminString | read-create | The SNMPv2 Community String or SNMPv3 contextName denotes the VRF 'context' and is used to logically separate the MIB module management. |
| T/F rcVrfTrapEnable | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5 | TruthValue | read-create | This objects is used to enable the generation of the VrfUp and VrfDown traps. true(1) - VRF Traps Enabled false(2) - VRF Traps Disabled |
| U32 rcVrfMaxRoutes | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6 | Unsigned32 | read-create | This object specifies the maximum number of routes that this VRF can support. The default value is 10000. |
| INT rcVrfAdminStatus | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7 | INTEGER | read-create | The administrative state of the Virtual Router. |
| VPN rcVrfVpnId | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8 | VPNId | read-create | The Virtual Private Network Identifier of the Virtual Router. |
| VRF rcVrfRpTrigger | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9 | VrfRpTriggerBitCode | read-create | This object represents Routing Protocol (RP) Triggers on a Virtual Router and it meant to be used to initiate or shutdown routing protocols on a VRF. Multiple RPs can be acted on simultaneously. Also, individual RPs can be brought up in steps, which should not affect the RPs that were running. The BITS represent an Action-code that specifies what action is to be performed for the RPs. The actions are: initiate(1) or shutdown(0). The running status of an RP shall be available in the VRF stats table's rcVrfRpStatus, which has a similar format, but represents the status. Bits 0-3 may be specified in any combination. Individual routing protocols may be enabled and disabled independently. Protocols are enabled by setting the respective BIT and are disabled by resetting the BIT. So, for example, to enable RIP and BGP protocols the rcVrfRpTrigger bits 0 and 2 need to be set, and as encoded as 10100000. All zeros should be interpreted as all protocols disable. |
| T/F rcVrfMaxRoutesTrapEnable | 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10 | TruthValue | read-create | This objects is used to enable the generation of the VRF Max Routes Exceeded traps. true(1) - VRF Max Routes Exceeded Traps Enabled false(2) - VRF Max Routes Exceeded Traps Disabled |
| rcVrfStat | 1.3.6.1.4.1.2272.1.203.1.1.2 | |||
| rcVrfStatScalars | 1.3.6.1.4.1.2272.1.203.1.1.2.1 | |||
| U32 rcVrfConfiguredVRFs | 1.3.6.1.4.1.2272.1.203.1.1.2.1.1 | Unsigned32 | read-only | The number of VRFs configured on this network element. |
| U32 rcVrfActiveVRFs | 1.3.6.1.4.1.2272.1.203.1.1.2.1.2 | Unsigned32 | read-only | The number of VRFs that are active on the network element. These are VRFs for which the rcVrfStatOperStatus = up(1) |
| rcVrfStatTable | 1.3.6.1.4.1.2272.1.203.1.1.2.2 | not-accessible | This table contains statistics for the Virtual Router. | |
| rcVrfStatEntry | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1 | not-accessible | Entries in this table are per rcVrfId. | |
| U32 rcVrfStatRouteEntries | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1 | Unsigned32 | read-only | Total number of routes for this VRF. |
| U32 rcVrfStatFIBEntries | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2 | Unsigned32 | read-only | Total number of FIB Entries for this VRF. |
| TIK rcVrfStatUpTime | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3 | TimeTicks | read-only | The time in (in hundredths of a second) since this VRF entry has been operational. |
| INT rcVrfOperStatus | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4 | INTEGER | read-only | The operational status of the Virtual Router. |
| VRF rcVrfRpStatus | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5 | VrfRpTriggerBitCode | read-only | This object represents the status of Routing Protocols on this VRF corresponding to the list of RP specified in rcVrfRpTrigger. The BITS represent an Action-code that specifies the status of the RPs. The status are: initiated (1) or shutdown (0). Initiated status is indicated when the respective BIT value is 1 and indicates shutdown when the respective BIT value is 0. Bits 0-3 may appear in any combination to indicate that RPs may be enabled and disabled independently or that multiple RP are acted on simultaneously. |
| IPt rcVrfRouterAddressType | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6 | InetAddressType | read-only | Router Address Type of this VRF. |
| IP rcVrfRouterAddress | 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7 | InetAddress | read-only | Router Address of this VRF. It is derived from one of the interfaces. If loopback interface is present, the loopback interface address can be used. However, loopback interface is optional. |
| I32 rcVrfIpVpnTableSize | 1.3.6.1.4.1.2272.1.203.1.1.3 | Integer32 | read-only | Size of Vrf IpVpn Table |
| rcVrfIpVpnTable | 1.3.6.1.4.1.2272.1.203.1.1.4 | not-accessible | Table required to configure vpn under ip. | |
| rcVrfIpVpnTableEntry | 1.3.6.1.4.1.2272.1.203.1.1.4.1 | not-accessible | Entries in this table are per rcVrfId. | |
| OID rcVrfIpVpnVrfId | 1.3.6.1.4.1.2272.1.203.1.1.4.1.1 | VrfIdentifier | not-accessible | The VrfId serves as the Index for the rcIpVpnVrfTable and also for the rcIpVpnRouteDistinguisherTable. It allows to connect to the vrf table to obtain other attributes like the vrf name, rcVrfMaxRoutesTrapEnable etc. |
| ENA rcVrfIpVpnStatus | 1.3.6.1.4.1.2272.1.203.1.1.4.1.2 | EnableValue | read-create | The status of IpVpn. |
| IDL rcVrfIpVpnImportRTList | 1.3.6.1.4.1.2272.1.203.1.1.4.1.3 | IdList | read-create | The Import RT list is a list of all the route-targets attached to a particular vrf behaving in the import mode. |
| IDL rcVrfIpVpnExportRTList | 1.3.6.1.4.1.2272.1.203.1.1.4.1.4 | IdList | read-create | The Export RT list is a list of all the route-targets attached to a particular vrf in the export mode. |
| INT rcVrfIpVpnSvcLblAllocOpt | 1.3.6.1.4.1.2272.1.203.1.1.4.1.5 | INTEGER | read-create | The service label allocation option for the ipvpn |
| ROW rcVrfIpVpnRowStatus | 1.3.6.1.4.1.2272.1.203.1.1.4.1.6 | RowStatus | read-create | RowStatus for the Vpn Entry. |
| I32 rcVrfIpVpnIsidNumber | 1.3.6.1.4.1.2272.1.203.1.1.4.1.7 | Integer32 | read-create | IP VPN I-SID number.Default 0 value indicates that no i-sid has been assinged. |
| rcVrfNameTable | 1.3.6.1.4.1.2272.1.203.1.1.5 | not-accessible | This table is for EDM and SNMP agent to get source vrf name for inter-vrf route redistribute. | |
| rcVrfNameEntry | 1.3.6.1.4.1.2272.1.203.1.1.5.1 | not-accessible | Each entry has the vrfid and name for source vrf needed by inter-vrf route redistribute. | |
| OID rcVrfNameVrfId | 1.3.6.1.4.1.2272.1.203.1.1.5.1.1 | VrfIdentifier | not-accessible | The unique id of this virtual router instance. |
| STR rcVrfNameVrfName | 1.3.6.1.4.1.2272.1.203.1.1.5.1.2 | DisplayString | read-only | The Name of the Virtual Router. |
| rcVrfNotificationObjects | 1.3.6.1.4.1.2272.1.203.1.2 | |||
| rcCobaltBlue | 1.3.6.1.4.1.2272.1.204 | |||
| rcCobaltBlueMib | 1.3.6.1.4.1.2272.1.204.1 | |||
| rcCbNotifications | 1.3.6.1.4.1.2272.1.204.1.0 | |||
| STR rcLoginUserName | 1.3.6.1.4.1.2272.1.204.1.0.1 | DisplayString | accessible-for-notify | Used to inidcation the login user name for notification |
| IP rcLoginHostIpAddress | 1.3.6.1.4.1.2272.1.204.1.0.2 | IpAddress | accessible-for-notify | Used to inidcation the login host ip address for notification |
| INT rcSlotType | 1.3.6.1.4.1.2272.1.204.1.0.3 | INTEGER | accessible-for-notify | Used to inidcate the slot type |
| INT rcFanZoneType | 1.3.6.1.4.1.2272.1.204.1.0.4 | INTEGER | accessible-for-notify | Type of the fan zone. |
| INT rcFanTrayId | 1.3.6.1.4.1.2272.1.204.1.0.5 | INTEGER | accessible-for-notify | Fan tray number in the fan zone |
| INT rcFanUnitId | 1.3.6.1.4.1.2272.1.204.1.0.6 | INTEGER | accessible-for-notify | Fan unit number in the fan tray |
| I32 rcCardTemp | 1.3.6.1.4.1.2272.1.204.1.0.7 | Integer32 | accessible-for-notify | Used to inidcate the card temperature |
| U32 rcCpuUtilization | 1.3.6.1.4.1.2272.1.204.1.0.8 | Unsigned32 | accessible-for-notify | Used to inidcate the CPU utilization |
| IPt rcLoginHostAddressType | 1.3.6.1.4.1.2272.1.204.1.0.9 | InetAddressType | accessible-for-notify | Used to inidcation the login host address type for notification |
| IP rcLoginHostInetAddress | 1.3.6.1.4.1.2272.1.204.1.0.10 | InetAddress | accessible-for-notify | Used to inidcation the login host inet address for notification |
| rcCbObjects | 1.3.6.1.4.1.2272.1.204.1.1 | |||
| rcCbSwitchFabric | 1.3.6.1.4.1.2272.1.204.1.1.1 | |||
| rcCbSwitchFabricScalars | 1.3.6.1.4.1.2272.1.204.1.1.1.1 | |||
| rcCbSwitchFabricStats | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1 | |||
| C64 rcCbSwitchFabricDropPrec1AcceptedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.1 | Counter64 | read-only | Accepted number of packets from drop precedence 1. The drop precedence is a function of the front end policer. |
| C64 rcCbSwitchFabricDropPrec1AcceptedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.2 | Counter64 | read-only | Accepted number of bytes from drop precedence 1 |
| C64 rcCbSwitchFabricDropPrec1CongestionMarkedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.3 | Counter64 | read-only | Congestion marked number of packets from drop precedence 1. |
| C64 rcCbSwitchFabricDropPrec1CongestionMarkedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.4 | Counter64 | read-only | Congestion marked number of bytes from drop precedence 1. |
| C64 rcCbSwitchFabricDropPrec1DiscardDroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.5 | Counter64 | read-only | WRED dropped number of packets from drop precedence 1. |
| C64 rcCbSwitchFabricDropPrec1DiscardDroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.6 | Counter64 | read-only | WRED dropped number of bytes from drop precedence 1. |
| C64 rcCbSwitchFabricDropPrec2AcceptedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.7 | Counter64 | read-only | Accepted number of packets from drop precedence 2 |
| C64 rcCbSwitchFabricDropPrec2AcceptedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.8 | Counter64 | read-only | Accepted number of bytes from drop precedence 2 |
| C64 rcCbSwitchFabricDropPrec2CongestionMarkedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.9 | Counter64 | read-only | Congestion marked number of packets from drop precedence 2. |
| C64 rcCbSwitchFabricDropPrec2CongestionMarkedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.10 | Counter64 | read-only | Congestion marked number of bytes from drop precedence 2. |
| C64 rcCbSwitchFabricDropPrec2DiscardDroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.11 | Counter64 | read-only | WRED dropped number of packets from drop precedence 2. |
| C64 rcCbSwitchFabricDropPrec2DiscardDroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.12 | Counter64 | read-only | WRED dropped number of bytes from drop precedence 2. |
| C64 rcCbSwitchFabricDropPrec3AcceptedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.13 | Counter64 | read-only | Accepted number of packets from drop precedence 3 |
| C64 rcCbSwitchFabricDropPrec3AcceptedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.14 | Counter64 | read-only | Accepted number of bytes from drop precedence 3 |
| C64 rcCbSwitchFabricDropPrec3CongestionMarkedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.15 | Counter64 | read-only | Congestion marked number of packets from drop precedence 3. |
| C64 rcCbSwitchFabricDropPrec3CongestionMarkedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.16 | Counter64 | read-only | Congestion marked number of bytes from drop precedence 3. |
| C64 rcCbSwitchFabricDropPrec3DiscardDroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.17 | Counter64 | read-only | WRED dropped number of packets from drop precedence 3. |
| C64 rcCbSwitchFabricDropPrec3DiscardDroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.18 | Counter64 | read-only | WRED dropped number of bytes from drop precedence 3. |
| C64 rcCbSwitchFabricDropPrec4AcceptedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.19 | Counter64 | read-only | Accepted number of packets from drop precedence 4 |
| C64 rcCbSwitchFabricDropPrec4AcceptedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.20 | Counter64 | read-only | Accepted number of bytes from drop precedence 4 |
| C64 rcCbSwitchFabricNonWredDroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.21 | Counter64 | read-only | Dropped packets due to non Random Early Detection |
| C64 rcCbSwitchFabricNonWredDroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.22 | Counter64 | read-only | Dropped packets bytes due to non Random Early Detection |
| C64 rcCbSwitchFabricDequeuedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.23 | Counter64 | read-only | Packets dequeued once inside the switch fabric |
| C64 rcCbSwitchFabricDequeuedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.24 | Counter64 | read-only | Packets bytes dequeued once inside the switch fabric |
| C64 rcCbSwitchFabricDropPrec1DroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.25 | Counter64 | read-only | non-WRED dropped number of packets from drop precedence 1. |
| C64 rcCbSwitchFabricDropPrec1DroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.26 | Counter64 | read-only | non-WRED dropped number of bytes from drop precedence 1. |
| C64 rcCbSwitchFabricDropPrec2DroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.27 | Counter64 | read-only | non-WRED dropped number of packets from drop precedence 2. |
| C64 rcCbSwitchFabricDropPrec2DroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.28 | Counter64 | read-only | non-WRED dropped number of bytes from drop precedence 2. |
| C64 rcCbSwitchFabricDropPrec3DroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.29 | Counter64 | read-only | non-WRED dropped number of packets from drop precedence 3. |
| C64 rcCbSwitchFabricDropPrec3DroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.30 | Counter64 | read-only | non-WRED dropped number of bytes from drop precedence 3. |
| C64 rcCbSwitchFabricDropPrec4CongestionMarkedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.31 | Counter64 | read-only | Congestion marked number of packets from drop precedence 4. |
| C64 rcCbSwitchFabricDropPrec4CongestionMarkedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.32 | Counter64 | read-only | Congestion marked number of bytes from drop precedence 4. |
| C64 rcCbSwitchFabricDropPrec4DiscardDroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.33 | Counter64 | read-only | WRED dropped number of packets from drop precedence 4. |
| C64 rcCbSwitchFabricDropPrec4DiscardDroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.34 | Counter64 | read-only | WRED dropped number of bytes from drop precedence 4. |
| C64 rcCbSwitchFabricDropPrec4DroppedPackets | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.35 | Counter64 | read-only | non-WRED dropped number of packets from drop precedence 4. |
| C64 rcCbSwitchFabricDropPrec4DroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.36 | Counter64 | read-only | non-WRED dropped number of bytes from drop precedence 4. |
| C64 rcCbSwitchFabricOverSubscribeTotalDroppedPkts | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.37 | Counter64 | read-only | Dropped number of packets due to free list underflow. |
| C64 rcCbSwitchFabricOverSubscribeTotalDroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.38 | Counter64 | read-only | Dropped number of bytes due to free list underflow. |
| C64 rcCbSwitchFabricOverSubscribeGuaranteeDroppedPkts | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.39 | Counter64 | read-only | Dropped number of packets Gbl buf thres guarantee. |
| C64 rcCbSwitchFabricOverSubscribeGuaranteeDroppedBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.40 | Counter64 | read-only | Dropped number of bytes Gbl buf thres guarantee. |
| C64 rcCbSwitchFabricOutPkts | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.41 | Counter64 | read-only | Number of packets out from egress interface. |
| C64 rcCbSwitchFabricOutBytes | 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.42 | Counter64 | read-only | Number of bytes out from egress interface. |
| T/F rcCbSwitchFabricStatsCapture | 1.3.6.1.4.1.2272.1.204.1.1.1.1.2 | TruthValue | read-write | Control to turn stats collection on or off |
| NUM rcCbSwitchFabricStatsPortId | 1.3.6.1.4.1.2272.1.204.1.1.1.1.3 | InterfaceIndex | read-write | The port on which stats is to be collected on. Must select a data port. |
| I32 rcCbSwitchFabricStatsCosId | 1.3.6.1.4.1.2272.1.204.1.1.1.1.4 | Integer32 | read-write | The CoS or VOQ to collect Stats on |
| INT rcCbBmeActiveBme | 1.3.6.1.4.1.2272.1.204.1.1.1.1.5 | INTEGER | read-only | The location of the active BME in the system. BME stands for Bandwidth Manager Engine. |
| INT rcCbBmeRedundancyMode | 1.3.6.1.4.1.2272.1.204.1.1.1.1.6 | INTEGER | read-only | Redundancy mode for BMEs. |
| INT rcCbProfileType | 1.3.6.1.4.1.2272.1.204.1.1.1.1.7 | INTEGER | read-write | Switch fabric profile type. |
| T/F rcCbSwitchFabricDeviceRead | 1.3.6.1.4.1.2272.1.204.1.1.1.1.8 | TruthValue | read-write | If turned on statistics for switch fabric counters are collected directly from devices. Otherwise, a cached copy is returned. |
| rcCbQueuingEngine2kTable | 1.3.6.1.4.1.2272.1.204.1.1.1.2 | not-accessible | Table containing the 2k based queuing engine entries for the system. | |
| rcCbQueuingEngine2kEntry | 1.3.6.1.4.1.2272.1.204.1.1.1.2.1 | not-accessible | Entry for the QE Table | |
| I32 rcCbQueuingEngine2kId | 1.3.6.1.4.1.2272.1.204.1.1.1.2.1.1 | Integer32 | not-accessible | Index for an entry in the QE Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- IO on slot 3: 1..3 IO on slot 4: 4..6 CP on slot 1: 7 CP on slot 2: 8 IO on slot 5: 9..11 IO on slot 6: 12..14 ... IO on slot 12: 30..32 |
| DEV rcCbQueuingEngine2kStatus | 1.3.6.1.4.1.2272.1.204.1.1.1.2.1.2 | DeviceStatus | read-only | Status of a given QE interface. |
| rcCbSwitchingEngine4kTable | 1.3.6.1.4.1.2272.1.204.1.1.1.3 | not-accessible | Table containing the 4k based switching engine entries for the system. | |
| rcCbSwitchingEngine4kEntry | 1.3.6.1.4.1.2272.1.204.1.1.1.3.1 | not-accessible | Entry for the SE Table. | |
| I32 rcCbSwitchingEngine4kId | 1.3.6.1.4.1.2272.1.204.1.1.1.3.1.1 | Integer32 | not-accessible | Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- SF on slot 13: 1..3 SF on slot 14: 4..6 ... SF on slot 18: 16..18 |
| DEV rcCbSwitchingEngine4kStatus | 1.3.6.1.4.1.2272.1.204.1.1.1.3.1.2 | DeviceStatus | read-only | Status of a given SE Device. |
| rcCbSwitchingEngine9600Table | 1.3.6.1.4.1.2272.1.204.1.1.1.4 | not-accessible | Table containing the 9600 based switching engine entries for the system. | |
| rcCbSwitchingEngine9600Entry | 1.3.6.1.4.1.2272.1.204.1.1.1.4.1 | not-accessible | Entry for the SE 9600 Table. | |
| I32 rcCbSwitchingEngine9600Id | 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.1 | Integer32 | not-accessible | Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- SF on slot 21: 1..2 SF on slot 22: 3..4 ... SF on slot 26: 11..12 |
| DEV rcCbSwitchingEngine9600Status | 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.2 | DeviceStatus | read-only | Status of a given Fast SE Device. |
| SFD rcCbSwitchingEngine9600Mode | 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.3 | SfDeviceMode | read-only | Mode of given Fast SE Device either BME or SE. |
| rcCbQe2kSerdesLinkTable | 1.3.6.1.4.1.2272.1.204.1.1.1.5 | not-accessible | Table containing the Serdes Link Information for the system. | |
| rcCbQe2kSerdesLinkEntry | 1.3.6.1.4.1.2272.1.204.1.1.1.5.1 | not-accessible | Entry for a QE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. | |
| I32 rcCbQe2kSerdesLinkId | 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.1 | Integer32 | not-accessible | This ID maps to a particular serdes port number for the identified device. Here's the mapping: rcCbQe2kSerdesLinkId 1 = port 0; Slot 3; QE Device 1 ... rcCbQe2kSerdesLinkId 20 = port 19; Slot 3; QE Device 1 rcCbQe2kSerdesLinkId 21 = port 0; Slot 3; QE Device 2 rcCbQe2kSerdesLinkId 41 = port 0; Slot 3; QE Device 3 rcCbQe2kSerdesLinkId 61 = port 0; Slot 4; QE Device 1 rcCbQe2kSerdesLinkId 121 = port 0; Slot 1; QE Device 1 rcCbQe2kSerdesLinkId 141 = port 0; Slot 1; QE Device 1 rcCbQe2kSerdesLinkId 161 = port 0; Slot 5; QE Device 1 rcCbQe2kSerdesLinkId 221 = port 0; Slot 6; QE Device 1 ... with slots 6-12 in order ... rcCbQe2kSerdesLinkId 640 = port 19; Slot 12; QE Device 3 Note link 15 & 17 are used when QE2k is connected to SF96. |
| INT rcCbQe2kSerdesLinkType | 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.2 | INTEGER | read-only | Link type of the serdes interface |
| DEV rcCbQe2kSerdesLinkStatus | 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.3 | DeviceStatus | read-only | Interface Status |
| I32 rcCbQe2kSerdesLinkConnectedToDevice | 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.4 | Integer32 | read-only | The SE/BME ID to which the QE2k ID is attached to. Note that IDs 16 & 18 are unused. |
| I32 rcCbQe2kSerdesLinkConnectedToSlot | 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.5 | Integer32 | read-only | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| rcCbSESerdesLinkTable | 1.3.6.1.4.1.2272.1.204.1.1.1.6 | not-accessible | Table containing the Serdes Link Information for the system. | |
| rcCbSESerdesLinkEntry | 1.3.6.1.4.1.2272.1.204.1.1.1.6.1 | not-accessible | Entry for an SE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. | |
| I32 rcCbSESerdesLinkId | 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.1 | Integer32 | not-accessible | This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 33 = port 0; Slot 21; Device 2 SESerdesLinkId 65 = port 0; Slot 21; Device 3 SESerdesLinkId 97 = port 0; Slot 22; Device 1 ... SESerdesLinkId 640 = port 31; Slot 26; Device 3 |
| INT rcCbSESerdesLinkType | 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.2 | INTEGER | read-only | Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi. |
| DEV rcCbSESerdesLinkStatus | 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.3 | DeviceStatus | read-only | Interface Status |
| I32 rcCbSESerdesLinkConnectedToDevice | 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.4 | Integer32 | read-only | The QE2k ID to which the SE/BME ID is attached to. |
| I32 rcCbSESerdesLinkConnectedToSlot | 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.5 | Integer32 | read-only | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| rcCbSE9600SerdesLinkTable | 1.3.6.1.4.1.2272.1.204.1.1.1.7 | not-accessible | Table containing the Fast Serdes Link Information for the system. | |
| rcCbSE9600SerdesLinkEntry | 1.3.6.1.4.1.2272.1.204.1.1.1.7.1 | not-accessible | Entry for an SE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. | |
| I32 rcCbSE9600SerdesLinkId | 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.1 | Integer32 | not-accessible | This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 97 = port 0; Slot 21; Device 2 SESerdesLinkId 193 = port 0; Slot 22; Device 1 SESerdesLinkId 289 = port 0; Slot 22; Device 2 ... SESerdesLinkId 1152 = port 96; Slot 26; Device 2 |
| INT rcCbSE9600SerdesLinkType | 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.2 | INTEGER | read-only | Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi. |
| DEV rcCbSE9600SerdesLinkStatus | 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.3 | DeviceStatus | read-only | Interface Status |
| I32 rcCbSE9600SerdesLinkConnectedToDevice | 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.4 | Integer32 | read-only | The QE2k ID to which the SE/BME ID is attached to. |
| I32 rcCbSE9600SerdesLinkConnectedToSlot | 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.5 | Integer32 | read-only | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| rcCbSPITable | 1.3.6.1.4.1.2272.1.204.1.1.1.8 | not-accessible | Table containing the system peripheral interface info. | |
| rcCbSPIEntry | 1.3.6.1.4.1.2272.1.204.1.1.1.8.1 | not-accessible | SPI table entry | |
| I32 rcCbSPIId | 1.3.6.1.4.1.2272.1.204.1.1.1.8.1.1 | Integer32 | not-accessible | The Index for the SPI Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- Slot 1: 1..6 Slot 2: 7..12 ... Slot 12: 57..72 Current implementation uses the first 6 IDs for each slot. |
| DEV rcCbSPIStatus | 1.3.6.1.4.1.2272.1.204.1.1.1.8.1.2 | DeviceStatus | read-only | SPI Status |
| rcVrrpv3 | 1.3.6.1.4.1.2272.1.206 | |||
| rcVrrpTmpMib | 1.3.6.1.4.1.2272.1.206.1 | |||
| rcVrrpTmpNotifications | 1.3.6.1.4.1.2272.1.206.1.0 | |||
| NTF rcVrrpTmpTrapNewMaster | 1.3.6.1.4.1.2272.1.206.1.0.1 | The newMaster trap indicates that the sending agent has transitioned to 'Master' state. | ||
| NTF rcVrrpTmpTrapProtoError | 1.3.6.1.4.1.2272.1.206.1.0.3 | The error trap indicates that the sending agent has encountered the protocol error indicated by rcVrrpTmpTrapProtoErrorReason. | ||
| rcVrrpTmpOperations | 1.3.6.1.4.1.2272.1.206.1.1 | |||
| INT rcVrrpTmpNotificationCntl | 1.3.6.1.4.1.2272.1.206.1.1.2 | INTEGER | read-write | Indicates whether the VRRP-enabled router will generate SNMP notifications for events defined in this MIB. 'Enabled' results in SNMP notifications; 'disabled', no notifications are sent. |
| rcVrrpTmpOperationsTable | 1.3.6.1.4.1.2272.1.206.1.1.7 | not-accessible | Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpTmpOperationsEntry' items which describe the operational characteristics of a virtual router. | |
| rcVrrpTmpOperationsEntry | 1.3.6.1.4.1.2272.1.206.1.1.7.1 | not-accessible | An entry in the rcVrrpTmpOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IP version, VRID and ifIndex. ifIndex represents a physical interface of the router. Note that rows in this table can be distinguished on a multi-stacked device running VRRP over IPv4 and IPv6 on the same physical interface. Rows in the table cannot be modified unless the value of 'rcVrrpTmpOperationsState' has transitioned to 'initialize' | |
| NUM rcVrrpTmpOperationsIfIndex | 1.3.6.1.4.1.2272.1.206.1.1.7.1.1 | InterfaceIndex | not-accessible | port interface index. |
| IPt rcVrrpTmpOperationsInetAddrType | 1.3.6.1.4.1.2272.1.206.1.1.7.1.2 | InetAddressType | not-accessible | The IP address type of RcVrrpTmpOperationsEntry. This value applies to both rcVrrpTmpOperationsMasterIpAddr and rcVrrpTmpOperationsPrimaryIpAddr. |
| VRI rcVrrpTmpOperationsVrId | 1.3.6.1.4.1.2272.1.206.1.1.7.1.3 | VrId | not-accessible | This object contains the Virtual Router Identifier (VRID). |
| MAC rcVrrpTmpOperationsVirtualMacAddr | 1.3.6.1.4.1.2272.1.206.1.1.7.1.4 | MacAddress | read-only | The virtual MAC address of the virtual router. Although this object can be derived from the 'rcVrrpTmpOperationsVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP notifications. |
| INT rcVrrpTmpOperationsState | 1.3.6.1.4.1.2272.1.206.1.1.7.1.5 | INTEGER | read-only | The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. |
| I32 rcVrrpTmpOperationsPriority | 1.3.6.1.4.1.2272.1.206.1.1.7.1.6 | Integer32 | read-create | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es) for VRRP over IPv4 and hence not settable. A 'badValue(3)' should be returned when a user tries to set 0 or 255 for this object. |
| I32 rcVrrpTmpOperationsAddrCount | 1.3.6.1.4.1.2272.1.206.1.1.7.1.7 | Integer32 | read-only | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the rcVrrpTmpAssociatedAddrTable that correspond to a given IP version/VRID/ifIndex. |
| IP rcVrrpTmpOperationsMasterIpAddr | 1.3.6.1.4.1.2272.1.206.1.1.7.1.8 | InetAddress | read-only | The master router's real IP address. Master router would set this address to rcVrrpTmpOperationsPrimaryIpAddr while transitioning to master state. For backup routers, this is the IP address listed as the source in VRRP advertisement last received by this virtual router. |
| IP rcVrrpTmpOperationsPrimaryIpAddr | 1.3.6.1.4.1.2272.1.206.1.1.7.1.9 | InetAddress | read-create | In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will become the rcVrrpTmpOperationsMasterIpAddr', should the virtual router transition from backup state to master. |
| NUM rcVrrpTmpOperationsAdvInterval | 1.3.6.1.4.1.2272.1.206.1.1.7.1.10 | TimeInterval | read-create | The time interval between sending advertisement messages. Only the master router sends VRRP advertisements. It is configured in seconds, but it is converted into centiseconds that is used in the VRRP packets. |
| T/F rcVrrpTmpOperationsPreemptMode | 1.3.6.1.4.1.2272.1.206.1.1.7.1.11 | TruthValue | read-create | Controls whether a higher priority virtual router will preempt a lower priority master. |
| T/F rcVrrpTmpOperationsAcceptMode | 1.3.6.1.4.1.2272.1.206.1.1.7.1.12 | TruthValue | read-create | Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address owner. Default is False. This object is not relevant for rows representing VRRP over IPv4 and should be set to false. |
| TIM rcVrrpTmpOperationsUpTime | 1.3.6.1.4.1.2272.1.206.1.1.7.1.13 | TimeStamp | read-only | This is the value of the `sysUpTime' object when this virtual router (i.e., the `rcVrrpTmpOperationsState') transitioned out of `initialized'. |
| STO rcVrrpTmpOperationsStorageType | 1.3.6.1.4.1.2272.1.206.1.1.7.1.14 | StorageType | read-create | The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration. |
| ROW rcVrrpTmpOperationsRowStatus | 1.3.6.1.4.1.2272.1.206.1.1.7.1.15 | RowStatus | read-create | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `rcVrrpTmpOperationsRowStatus' is set to active(1), no other objects in the conceptual row can be modified. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `rcVrrpTmpOperationsRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of rcVrrpTmpOperationsInetAddrType, rcVrrpTmpOperationsVrId and rcVrrpTmpOperationsPrimaryIpAddr has been set and there is at least one active row in the `rcVrrpTmpAssociatedIpAddrTable' defining an associated IP address. notInService(2) should be used to administratively bring the row down. A typical order of operation to add a row is: 1. Create a row in rcVrrpTmpOperationsTable with createAndWait(5). 2. Create one or more corresponding rows in rcVrrpTmpAssociatedIpAddrTable. 3. Populate the rcVrrpTmpOperationsEntry. 4. set rcVrrpTmpOperationsRowStatus to active(1). A typical order of operation to delete an entry is: 1. Set rcVrrpTmpOperationsRowStatus to notInService(2). 2. Set the corresponding rows in rcVrrpTmpAssociatedIpAddrTable to destroy(6) to delete the entry. 3. set rcVrrpTmpOperationsRowStatus to destroy(6) to delete the entry. |
| rcVrrpTmpAssociatedIpAddrTable | 1.3.6.1.4.1.2272.1.206.1.1.8 | not-accessible | The table of addresses associated with this virtual router. | |
| rcVrrpTmpAssociatedIpAddrEntry | 1.3.6.1.4.1.2272.1.206.1.1.8.1 | not-accessible | An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrID and ifIndex will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'rcVrrpTmpOperationsIpAddrCount'). Rows in the table cannot be modified unless the value of `rcVrrpTmpOperationsState' has transitioned to `initialize'. | |
| IP rcVrrpTmpAssociatedIpAddr | 1.3.6.1.4.1.2272.1.206.1.1.8.1.1 | InetAddress | not-accessible | The assigned IP addresses that a virtual router is responsible for backing up. The size of this object is either 4 or 16 depending on rcVrrpTmpOperationsInetAddrType. |
| ADR rcVrrpTmpAssociatedIpAddrPrefixLength | 1.3.6.1.4.1.2272.1.206.1.1.8.1.2 | InetAddressPrefixLength | not-accessible | The length of the prefix (in bits). |
| STO rcVrrpTmpAssociatedStorageType | 1.3.6.1.4.1.2272.1.206.1.1.8.1.3 | StorageType | read-create | The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration. |
| ROW rcVrrpTmpAssociatedIpAddrRowStatus | 1.3.6.1.4.1.2272.1.206.1.1.8.1.4 | RowStatus | read-create | The RowStatus variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Setting this object to active(1) results in the addition of an associated address for a virtual router. Setting this object to notInService(2) results in administratively bringing down the row. Destroying the entry or setting it to destroy(6) removes the associated address from the virtual router. The use of other values is implementation-dependent. Only rcVrrpTmpAssociatedStorageType can be modified when the row is in active(1) state for Implementations supporting write access to rcVrrpTmpAssociatedStorageType Implementations should not allow deletion of the last row corresponding to an active row in rcVrrpTmpOperationsTable. Refer to description of rcVrrpTmpOperationsRowStatus for a typical row creation and deletion scenarios. |
| INT rcVrrpTmpNewMasterReason | 1.3.6.1.4.1.2272.1.206.1.1.9 | INTEGER | read-only | This indicates the reason for rcVrrpTmpNewMaster trap. Used by rcVrrpTmpTrapNewMaster trap. The object can be polled if the rcVrrpTmpNewMaster trap is lost to identify the reason for transmission. Backup router should return notmaster(0) when pooled. |
| INT rcVrrpTmpTrapProtoErrReason | 1.3.6.1.4.1.2272.1.206.1.1.10 | INTEGER | accessible-for-notify | This indicates the reason for protocol error trap. Used by rcVrrpTmpTrapProtoError trap. |
| rcVrrpTmpStatistics | 1.3.6.1.4.1.2272.1.206.1.2 | |||
| C32 rcVrrpTmpRouterChecksumErrors | 1.3.6.1.4.1.2272.1.206.1.2.1 | Counter32 | read-only | The total number of VRRP packets received with an invalid VRRP checksum value. |
| C32 rcVrrpTmpRouterVersionErrors | 1.3.6.1.4.1.2272.1.206.1.2.2 | Counter32 | read-only | The total number of VRRP packets received with an unknown or unsupported version number. |
| C32 rcVrrpTmpRouterVrIdErrors | 1.3.6.1.4.1.2272.1.206.1.2.3 | Counter32 | read-only | The total number of VRRP packets received with an invalid VRID for this virtual router. |
| rcVrrpTmpRouterStatisticsTable | 1.3.6.1.4.1.2272.1.206.1.2.5 | not-accessible | Table of virtual router statistics. | |
| rcVrrpTmpRouterStatisticsEntry | 1.3.6.1.4.1.2272.1.206.1.2.5.1 | not-accessible | An entry in the table, containing statistics information about a given virtual router. | |
| C32 rcVrrpTmpStatisticsMasterTransitions | 1.3.6.1.4.1.2272.1.206.1.2.5.1.1 | Counter32 | read-only | The total number of times that this virtual router's state has transitioned to MASTER. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsRcvdAdvertisements | 1.3.6.1.4.1.2272.1.206.1.2.5.1.2 | Counter32 | read-only | The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsAdvIntervalErrors | 1.3.6.1.4.1.2272.1.206.1.2.5.1.3 | Counter32 | read-only | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsIpTtlErrors | 1.3.6.1.4.1.2272.1.206.1.2.5.1.4 | Counter32 | read-only | The total number of VRRP packets received by the Virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsRcvdPriZeroPackets | 1.3.6.1.4.1.2272.1.206.1.2.5.1.5 | Counter32 | read-only | The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsSentPriZeroPackets | 1.3.6.1.4.1.2272.1.206.1.2.5.1.6 | Counter32 | read-only | The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsRcvdInvalidTypePkts | 1.3.6.1.4.1.2272.1.206.1.2.5.1.7 | Counter32 | read-only | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsAddressListErrors | 1.3.6.1.4.1.2272.1.206.1.2.5.1.8 | Counter32 | read-only | The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsPacketLengthErrors | 1.3.6.1.4.1.2272.1.206.1.2.5.1.9 | Counter32 | read-only | The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime. |
| C32 rcVrrpTmpStatisticsRcvdInvalidAuthentications | 1.3.6.1.4.1.2272.1.206.1.2.5.1.10 | Counter32 | read-only | The total number of packets received with an unknown authentication type. |
| TIM rcVrrpTmpStatisticsDiscontinuityTime | 1.3.6.1.4.1.2272.1.206.1.2.5.1.11 | TimeStamp | read-only | The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value. |
| I32 rcVrrpTmpStatisticsRefreshRate | 1.3.6.1.4.1.2272.1.206.1.2.5.1.12 | Integer32 | read-only | The minimum reasonable polling interval for this entry. This object provides an indication of the minimum Amount of time required to update the counters in this entry. |
| rcVrrpExtMib | 1.3.6.1.4.1.2272.1.206.2 | |||
| rcVrrpExtObjects | 1.3.6.1.4.1.2272.1.206.2.1 | |||
| rcVrrpExtScalars | 1.3.6.1.4.1.2272.1.206.2.1.1 | |||
| INT rcVrrpExtVersionNumber | 1.3.6.1.4.1.2272.1.206.2.1.1.2 | INTEGER | read-only | The version number of Vrrp for IPv6 is 3. |
| INT rcVrrpExtTrapStateTransitionType | 1.3.6.1.4.1.2272.1.206.2.1.1.3 | INTEGER | read-only | Potential types of state transitions.Used by rcVrrpv3TrapStateTransition trap. |
| INT rcVrrpExtTrapStateTransitionCause | 1.3.6.1.4.1.2272.1.206.2.1.1.4 | INTEGER | read-only | Potential types of causes that will generate a rcVrrpExtTrapStateTransition trap. |
| VRI rcVrrpExtOperationsVrId | 1.3.6.1.4.1.2272.1.206.2.1.1.5 | VrId | read-only | This object contains the Virtual Router Identifier (VRID).This is used in rcVrrpExtTrapStateTransition. |
| rcVrrpExtNotifications | 1.3.6.1.4.1.2272.1.206.2.2 | |||
| NTF rcVrrpExtTrapStateTransition | 1.3.6.1.4.1.2272.1.206.2.2.1 | A rcVrrpExtTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | ||
| rcVrrpExtOperations | 1.3.6.1.4.1.2272.1.206.2.3 | |||
| rcVrrpExtOperationsTable | 1.3.6.1.4.1.2272.1.206.2.3.11 | not-accessible | Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperationsEntry' items which describe the operational characteristics of a virtual router. This table is an extention of 'rcVrrpTmpOperationsTable'.It contains the mib objects that are Nortel specific. | |
| rcVrrpExtOperationsEntry | 1.3.6.1.4.1.2272.1.206.2.3.11.1 | not-accessible | An entry in the rcVrrpExtOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IP version, VRID and ifIndex. ifIndex represents a physical interface of the router. Note that rows in this table can be distinguished on a multi-stacked device running VRRP over IPv4 and IPv6 on the same physical interface. Rows in the table cannot be modified unless the value of 'rcVrrpTmpOperationsState' has transitioned to 'initialize'. | |
| INT rcVrrpExtOperationsAction | 1.3.6.1.4.1.2272.1.206.2.3.11.1.1 | INTEGER | read-create | Used to trigger an action on this vrrp interface. |
| INT rcVrrpExtOperationsBackUpMaster | 1.3.6.1.4.1.2272.1.206.2.3.11.1.2 | INTEGER | read-create | Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT. |
| INT rcVrrpExtOperationsBackUpMasterState | 1.3.6.1.4.1.2272.1.206.2.3.11.1.3 | INTEGER | read-only | Indicate whether backup VRRP switch traffic forwarding is enabled or not. |
| IP rcVrrpExtOperationsCriticalIpAddr | 1.3.6.1.4.1.2272.1.206.2.3.11.1.4 | InetAddress | read-create | IP address of the interface that will cause a shutdown event.Only IPv6 address is supported as of now. |
| T/F rcVrrpExtOperationsCriticalIpAddrEnabled | 1.3.6.1.4.1.2272.1.206.2.3.11.1.5 | TruthValue | read-create | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (::). No effect if an user-defined IP address does not exist. |
| INT rcVrrpExtOperationsControl | 1.3.6.1.4.1.2272.1.206.2.3.11.1.6 | INTEGER | read-create | This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backup'; Setting the value to 'disabled', will tranisition the router from 'master' or 'backup' to 'initialize'. |
| I32 rcVrrpExtOperationsHoldDownTimer | 1.3.6.1.4.1.2272.1.206.2.3.11.1.7 | Integer32 | read-create | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| INT rcVrrpExtOperationsHoldDownState | 1.3.6.1.4.1.2272.1.206.2.3.11.1.8 | INTEGER | read-only | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. |
| I32 rcVrrpExtOperationsHoldDownTimeRemaining | 1.3.6.1.4.1.2272.1.206.2.3.11.1.9 | Integer32 | read-only | Used to indicate the amount of time (in seconds) left before the rcVrrpExtOperationsHoldDownTimer will expire. |
| I32 rcVrrpExtOperationsFasterAdvInterval | 1.3.6.1.4.1.2272.1.206.2.3.11.1.10 | Integer32 | read-create | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of the regular advertisement interval. |
| T/F rcVrrpExtOperationsFasterAdvIntervalEnabled | 1.3.6.1.4.1.2272.1.206.2.3.11.1.11 | TruthValue | read-create | Used to indicate if the Faster Advertisement Interval should be used.'Disable' means use regular Advertisement interval. |
| IP rcVrrpExtOperationsLinkLocalAddr | 1.3.6.1.4.1.2272.1.206.2.3.11.1.12 | InetAddress | read-create | The assigned Linklocal addresses to the virtual router interface. This mib object support only IPv6 address as of now. |
| IP rcVrrpExtOperationsGlobalIpAddr | 1.3.6.1.4.1.2272.1.206.2.3.11.1.13 | InetAddress | read-create | The assigned Global addresses to the virtual router interface. This mib object support only IPv6 address as of now. |
| rcVspTalk | 1.3.6.1.4.1.2272.1.208 | |||
| rcVspTalkObjects | 1.3.6.1.4.1.2272.1.208.1 | |||
| rcVspTalkScalars | 1.3.6.1.4.1.2272.1.208.1.1 | |||
| T/F rcVspTalkGlobalEnable | 1.3.6.1.4.1.2272.1.208.1.1.1 | TruthValue | read-write | Create or destroy the VSPTalk related data structure and threads. When it is false, rcVspTalkGroupTable entry will be removed. |
| IP rcVspTalkEndpointAddress | 1.3.6.1.4.1.2272.1.208.1.1.2 | IpAddress | read-write | The assigned circuitless IP address of the application endpoint which must belong to the same subnet of existing IP interface on device. This object assignment requires rcVspTalkEndpointVrfName and rcVspTalkEndpointMacOffset |
| STR rcVspTalkEndpointVrfName | 1.3.6.1.4.1.2272.1.208.1.1.3 | DisplayString | read-write | The name of the virtual Router which rcVspTalkEndpointAddress belong to. |
| T/F rcVspTalkNotificationEnable | 1.3.6.1.4.1.2272.1.208.1.1.4 | TruthValue | read-write | Enable/disable the notifcation of the register events |
| rcVspTalkGroupTable | 1.3.6.1.4.1.2272.1.208.1.2 | not-accessible | Vsp Talk Group includes IM configuraton and users | |
| rcVspTalkGroupEntry | 1.3.6.1.4.1.2272.1.208.1.2.1 | not-accessible | Entry of the IM group | |
| INT rcVspTalkGroupType | 1.3.6.1.4.1.2272.1.208.1.2.1.1 | INTEGER | not-accessible | Type of VSP messaging group |
| STR rcVspTalkGroupServerAddress | 1.3.6.1.4.1.2272.1.208.1.2.1.2 | DisplayString | read-create | Messaging server address |
| I32 rcVspTalkGroupServerPort | 1.3.6.1.4.1.2272.1.208.1.2.1.3 | Integer32 | read-create | The TCP port for Messaging |
| T/F rcVspTalkGroupServerOldSslTypeEnable | 1.3.6.1.4.1.2272.1.208.1.2.1.4 | TruthValue | read-create | Enable/disable using old style SSL interface |
| INT rcVspTalkGroupServerEncryption | 1.3.6.1.4.1.2272.1.208.1.2.1.5 | INTEGER | read-create | Encrytion option. |
| STR rcVspTalkGroupServerProxy | 1.3.6.1.4.1.2272.1.208.1.2.1.6 | DisplayString | read-create | Messaging server proxy |
| STR rcVspTalkGroupClientUsername | 1.3.6.1.4.1.2272.1.208.1.2.1.7 | DisplayString | read-create | Messaging client Username for this device |
| STR rcVspTalkGroupClientPassword | 1.3.6.1.4.1.2272.1.208.1.2.1.8 | DisplayString | read-create | Password for rcVspTalkGroupClientUsername which is registered in the server. |
| STR rcVspTalkGroupClientMembers | 1.3.6.1.4.1.2272.1.208.1.2.1.9 | DisplayString | read-create | A list of members of this messaging group. There is a max of 12 members, with names seperated by comma |
| T/F rcVspTalkGroupEnable | 1.3.6.1.4.1.2272.1.208.1.2.1.10 | TruthValue | read-create | Adminstratively Enable/disable this messaging group |
| ROW rcVspTalkGroupRowStatus | 1.3.6.1.4.1.2272.1.208.1.2.1.11 | RowStatus | read-create | Used to create/delete entries |
| rcA1100 | 1.3.6.1.4.1.2272.2 | |||
| rcA1250 | 1.3.6.1.4.1.2272.6 | |||
| rcA1150 | 1.3.6.1.4.1.2272.7 | |||
| rcA1200 | 1.3.6.1.4.1.2272.8 | |||
| rcA1050 | 1.3.6.1.4.1.2272.9 | |||
| rcA740 | 1.3.6.1.4.1.2272.20 | |||
| rcA750 | 1.3.6.1.4.1.2272.21 | |||
| rcA790 | 1.3.6.1.4.1.2272.22 | |||
| rcA750S | 1.3.6.1.4.1.2272.23 | |||
| rcA8610 | 1.3.6.1.4.1.2272.30 | |||
| rcA8606 | 1.3.6.1.4.1.2272.31 | |||
| rcA8110 | 1.3.6.1.4.1.2272.32 | |||
| rcA8106 | 1.3.6.1.4.1.2272.33 | |||
| rcA8603 | 1.3.6.1.4.1.2272.34 | |||
| rcA8103 | 1.3.6.1.4.1.2272.35 | |||
| rcA8110co | 1.3.6.1.4.1.2272.36 | |||
| rcA8610co | 1.3.6.1.4.1.2272.37 | |||
| rcBayStack | 1.3.6.1.4.1.2272.40 | |||
| rcA1424 | 1.3.6.1.4.1.2272.42 | |||
| rcA1648 | 1.3.6.1.4.1.2272.43 | |||
| rcA1612 | 1.3.6.1.4.1.2272.44 | |||
| rcA1624 | 1.3.6.1.4.1.2272.45 | |||
| rcRBS2402 | 1.3.6.1.4.1.2272.46 | |||
| rcVSP9012 | 1.3.6.1.4.1.2272.201 | |||
| rcA8003 | 1.3.6.1.4.1.2272.280887555 | |||
| rcA8006 | 1.3.6.1.4.1.2272.280887558 | |||
| rcA8010 | 1.3.6.1.4.1.2272.280887562 | |||
| rcA8010co | 1.3.6.1.4.1.2272.1623064842 | |||
| snmpV2 | 1.3.6.1.6 | |||
| snmpModules | 1.3.6.1.6.3 | |||
| snmpMIB | 1.3.6.1.6.3.1 | |||
| snmpMIBObjects | 1.3.6.1.6.3.1.1 | |||
| snmpTraps | 1.3.6.1.6.3.1.1.5 |
5,379 OIDs total — showing 3,042-5,379 (page 2 of 2)
« Prev Page 2 of 2