RAPID-CITY-BAY-STACK :: rcBayStackSshSessionInetAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAPID-CITY-BAY-STACK › rcBayStackSshSessionInetAddress

rcBayStackSshSessionInetAddress

Module: RAPID-CITY-BAY-STACK

OID (symbolic): RAPID-CITY-BAY-STACK::rcBayStackSshSessionInetAddress

OID (numeric): 1.3.6.1.4.1.2272.40.1.1.2.1.4

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-only

Description: This object contains the IP address of the SSH client that opened the SSH session. The type of IP address contained in this object is specified by the corresponding instance of rcBayStackSshSessionInetAddressType.

What is rcBayStackSshSessionInetAddress?

This read-only value holds the IP address, in either IPv4 or IPv6 form as indicated by rcBayStackSshSessionInetAddressType, of the client that opened a given SSH session. An administrator uses it as the protocol-agnostic counterpart to rcBayStackSshSessionIp to audit SSH access regardless of IP version. It's the field to check when the session's address type is ipv6 rather than ipv4.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.40.1.1.2.1.4
snmpwalk -v2c -c public <target> RAPID-CITY-BAY-STACK::rcBayStackSshSessionInetAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.40.1.1.2.1.4.1
snmpget -v2c -c public <target> RAPID-CITY-BAY-STACK::rcBayStackSshSessionInetAddress.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rcBayStackSshSessionInetAddress.1

Start monitoring Nortel/Avaya BayStack Ethernet switch (SSH session/TFTP firmware actions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAPID-CITY-BAY-STACK::rcBayStackSshSessionInetAddress OID value, configure state conditions and alerts, and monitor any Nortel/Avaya BayStack Ethernet switch (SSH session/TFTP firmware actions) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.40rcBayStackRAPID-CITY
Numeric OIDNameModule
1.3.6.1.4.1.2272.40.1rcBayStackMIBRAPID-CITY-BAY-STACK
1.3.6.1.4.1.2272.40.1.1rcBayStackObjectsRAPID-CITY-BAY-STACK
1.3.6.1.4.1.2272.40.1.1.2rcBayStackSshSessionTableRAPID-CITY-BAY-STACK
1.3.6.1.4.1.2272.40.1.1.2.1rcBayStackSshSessionEntryRAPID-CITY-BAY-STACK
1.3.6.1.4.1.2272.40.1.1.2.1.4rcBayStackSshSessionInetAddressRAPID-CITY-BAY-STACK