All MIBs › RAISECOM-ERPS-MIB › rcErpsWtrTime
rcErpsWtrTime
Module: RAISECOM-ERPS-MIB
OID (symbolic): RAISECOM-ERPS-MIB::rcErpsWtrTime
OID (numeric): 1.3.6.1.4.1.8886.6.1.53.1.2.1.13
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: In revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become fault-free. After the failed working transport entity meets this criterion, a fixed period of time shall elapse before a normal traffic signal uses it again. This period, called wait-to-restore (WTR) period, may be configured by the operator in 1 minute steps between 5 and 12 minutes; the default value is 5 minutes.
What is rcErpsWtrTime?
Sets the Wait-to-Restore timer, in 1-minute steps from 5 to 12 minutes, that a revertive ring waits after a failed link becomes fault-free before switching traffic back onto it, avoiding flapping on a marginal link.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.53 | rcErps | RAISECOM-ERPS-MIB |
| 1.3.6.1.4.1.8886.6.1.53.1 | rcErpsBaseGroup | RAISECOM-ERPS-MIB |
| 1.3.6.1.4.1.8886.6.1.53.1.2 | rcErpsCfgTable | RAISECOM-ERPS-MIB |
| 1.3.6.1.4.1.8886.6.1.53.1.2.1 | rcErpsCfgEntry | RAISECOM-ERPS-MIB |
| 1.3.6.1.4.1.8886.6.1.53.1.2.1.13 | rcErpsWtrTime | RAISECOM-ERPS-MIB |